23-013 Berth #6 Rehabilitation

Scope of Work

Bid No. 23-013

Port of Pensacola

Berth 6 Rehabilitation Project

• Removal of existing shore power station at west end of Berth 6 and associated conductors. Shore power station to remain property of Port of Pensacola.
• Removal and storage of existing cathodic anodes hanging from underside of Berth 6.
• Demolition and disposal of existing pile-supported concrete deck and beams including all appurtenances (bollard pedestals, water piping, railroad tracks, etc.) from the existing expansion joint between existing Berths 5 & 6 to the east end of the existing Berth 6 with exception of the steel stowage pin socket which is to be removed and reinstalled. Note this work is to be performed in two (2) phases.
• Demolition and disposal of existing concrete transition slab-on-grade between existing Warehouse 6 and Berth 6 concrete dock.
• Demolition and disposal of existing ship unloader storm lock tower foundations.
• Furnish & install new structural steel walkways W1 & W2 and associated stairs and landings S1 & S2. Includes relocation for Phase 2 and removal after completion of Phase 2.
• Furnish & install FRP laminate pile repairs on thirty-five (35) existing damaged 18” pre-stressed concrete piles.
• Clean and inspect existing steel sheet pile wall and perform repairs as required.
• Cast-in-Place New Berth 6 Concrete Structures over water in two (2) phases.
• Furnish and Install crane rails.
• Grade supported cast-in-place concrete transition slab between Berth 6 and Warehouse 6 and cathodic protection boxes.
• Remove and relocate 75MT single bit mooring bollards from existing Breasting/Mooring Dolphin to the new dock structure (includes new anchoring hardware).
• Furnish and install new 75MT single bit mooring bollards at new dock (includes new anchoring hardware).
• Install pile-supported ship unloader storm lock tower foundations.
• Furnish and Install Water System.
• Furnish and install impressed current Cathodic Protection System for waterside protection of existing Berth 6 steel sheet pile wall.
• Furnish and Install new Electrical System for shore power stations.
• Repair retaining wall expansion joint and asphalt installation at east end of Berth 6.

Project manual and Drawings are accompanied by reference drawings as listed below:

itb-23013_Berth6Rehab_ProjectManual (PDF)
itb-23013_Berth6Rehab_Drawings (PDF)
Berth 6 Breasting and Mooring Dolphins (M4023) - As-Built Dwgs (2019-12-10) (PDF)
Berth 6 Fender Upgrades (M1714A) (PDF)
Berth 6 Original Construction Drawings (PDF)
Port Cathodic Repairs (M4497.1) (PDF)
Port of Pensacola Berth 5 and 6 Shore Power IFC drawings (M4401) (PDF)