23-012 Bayou Texar Boat Ramp

SCOPE OF WORK

BAYOU TEXAR BOAT RAMP

2700 Cervantes Street

Pensacola, Florida

• Remove and dispose of existing walkways, benches, decking, stringers, and crossmembers. Retrieve used sheet pile from the water and re-use.
• Re-use existing pilings sheet pile wall. Any new sheet piling required is considered part of the scope.
• Install new white cone piling caps and white rub strips or rubber boat bumpers.
• Replace inside stringers and blocking with 2”x 8” pressure-treated lumber 12” on center.
• Install Stainless Steel hurricane clips. 304 stainless.
• Install 5/4” x 6” (MoistureShield, Timer Tech or equivalent) composite decking with 2.5” stainless-steel deck screws.
• Replace outer stringers with 2”x10” pressure treated lumber. Installed with (2) ¾” Stainless Steel bolts and washers per piling.
• Walkways will start at the top of the concrete ramp. New pilings will be installed every 6’ down the ramp edge to prevent vehicle damage to the walkways.
• Replace handrails in kind with 4”x4” posts and composite rail (MoistureShield, Timer Tech or equivalent) secured with Stainless steel fasteners.
• Contractor to furnish all labor, materials, and equipment to complete work
• Contractor is to provide a one-year warranty on all workmanship.
• Obtain a certificate of proof of liability insurance ($1,000,000) and workers’ compensation with the City of Pensacola named additional insured as a certificate holder. (See detailed requirements.)
• Contractor is responsible for all necessary permits as required by City, State, and Federal mandates.

Work must be completed by May 1st, 2023.