Flashers and Load Switches - FHWA Eligible

***ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB.*** Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site (updated).pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct. ________________________________________________________________________________________________________ It shall meet NEMA TS1, TS2, and 170 requirements. Flashers shall have outputs rated at 15 Amps RMS per circuit Max. load Current. It shall provide 56 flashes per minute. It shall be 120 VAC. Product data must be submitted with the bid. Product information must indicate compliance with each of the requirements. Each flasher shall be shipped in a separate box. KYTC Warehouse (T-01-0300) FOR INTERAL USE ONLY

It shall meet NEMA TS1, TS2, and 170 requirements. Flashers shall have outputs rated at 10 Amps RMS per circuit Max. load Current. Load switch indicators shall display the status of the input signal to the switch. It shall have three electrically independent circuits. It shall have an isolation of greater than 2000 volts. The maximum input current shall be less than 20mA. Each load switch shall be packaged in an individual box. Brand & product data indicating compliance with all requirements must be submitted with the bid. KYTC Warehouse (T-01-0700) FOR INTERAL USE ONLY