25-0147-4. Marine Patrol Response Vessel (Chatham County Marine Patrol)

SPECIFICATIONS FOR: BID NO. 25-0147-4
MARINE PATROL RESPONSE VESSEL
(Chatham County Marine Patrol)
THIS PROJECT IS FUNDED IN WHOLE OR IN PART BY THE 2025 DHS/FEMA
PORT SECURITY GRANT PROGRAM (PSGP).
GENERAL SPECIFICATIONS:
**PLEASE NOTE: Chatham County does not utilize third parties to obtain bids on its behalf. **
Chatham County is soliciting competitive bids from qualified vendors to secure the purchase of
one (1) marine patrol response vessel for Chatham County Marine Patrol.
Bid award may be contingent upon delivery time frame.
During the bidding process, bidders are not to contact any department directly.
Direct any questions related to this ITB to Bernadine P. Bruen, Procurement Specialist,
through the County's procurement portal: https://chathamcountyga.bonfirehub.com/portal.
SPECIFICATIONS:
A. REQUIREMENTS:
1. Provide references from owners of projects with similar specifications. Include
government owners if possible. If the vendor has provided product to the
Chatham County Board of Commissioners within the last five (5) years, at least
one (1) of the owner references must be from the appropriate party within the
Chatham County Government.
2. Bidder must declare acknowledgement of "Attachment - Special Provisions for
Procurement - Federal Requirements (includes Build America, Buy America)", as
this project is funded in whole or in part by the 2025 DHS/FEMA Port Security
Grant Program (PSGP)
3. All equipment must be new, to include manuals, and copy of boat and equipment
manufacturer's recommended preventive maintenance schedule.
4. The Grantee/Vendor must comply with the requirements of the Build America,
Buy America (BABA) Act, 41 USC 8301 note, and all applicable rules and
notices, as may be amended, if applicable to the Grantee's infrastructure project.
Pursuant to HUD's Notice, "Public Interest Phased Implementation Waiver for FY
2022 and 2023 of Build America, Buy America Provisions as Applied to
Recipients of HUD Federal Financial Assistance" (88 FR 17001), any funds
obligated by HUD on or after the applicable listed effective dates, are subject to
BABA requirements, unless excepted by a waiver.

SPECIFICATIONS FOR: BID NO. 25-0147-4
B. MARINE PATROL RESPONSE VESSEL:
ONE (1) CENTER CONSOLE BOAT AND VESSEL TRAILER
Note: THE BELOW IS THE BASIS OF DESIGN. The County will accept equal or greater.
SPECIFICATIONS:
SECTION 1: EQUIPMENT DIMENSIONS
Length Overall (LOA): 27'-4" / 8.3m
Beam Overall (BOA): 10' / 3.1m
Deadrise at Transom: 25 Degrees
Draft (Engine Trimmed Up): 20" / 0.5m
Max HP: 600
Top Speed (Knots): 50
Max Range (NM): 220 with 10% reserve
Fuel Cap (gal): 150
Light Ship Weight (lbs.): 6000
Operational Weight (lbs.): 6,915
Maximum Payload (lbs.): 2,811
Weight on Trailer (lbs.): 9,315
Length on Trailer - Road Transport (Feet): 38'-4
Height on Trailer - Road Transport (Feet): 11'-6
SECTION 2: HULL/ DECK
5086 bottom plate
Reinforced keel beaching plate
Stepped transom with speed shoe in bottom plate
Welded performance lifting strakes
Self bailing decks with high volume scupper drains
Bow storage/anchor locker with aft facing door
Dual aft rigging locker system with topside access
Transom inspection hatch
Sacrificial hull anode(s)

SPECIFICATIONS FOR: BID NO. 25-0147-4
SECTION 3: SUPER STRUCTURE
Aluminum T-top with rain capture ring and down spouts to self-bailing deck
Safety glass windshield and side windows
Radar pod
Safety hand/grab rail system with black rubberized rail wrap
SECTION 4: CONSOLE & DASH
Port side helm
OHIP - Over Head Instrument Panel
SECTION 5: SEATING/SEAT STORAGE/UPHOLSTERY
Two (2) flip up seats with seat belts mounted on bolster storage box
Aft storage bolster with large aft facing gasketed aluminum doors
SECTION 6: COLLAR SYSTEM
Foam SAFE XDR-1 Extreme Duty Reinforced Collar
System with black rubstrake
Collar color: Gray
SECTION 7: COATINGS, COVERINGS & LETTERING
Black non-skid decks and gunnels
Black rubberized dash skid
Upholstered headliner
SECTION 8: TOWING/LIFTING/ATTACHMENT POINTS
Six (6) 10" cast aluminum weld on cleats
Custom fabricated weld on pick eyes with SS inserts
Weld on bow eye with dual SS inserts
Weld on transom tie downs
Fore and aft tow posts with single SS cross pin
Motor guard/tow line guide
SECTION 9: ELECTRICAL SYSTEM/ POWER GENERATION
House battery system 12VDC - one (1) marine grade battery with switch
Marine Grade Breaker System
Marine Grade Switches
Two(2) 12VDC power receptacles
Self-parking intermittent windshield wiper system with washer

SPECIFICATIONS FOR: BID NO. 25-0147-4
SECTION 10: LIGHTING
LED navigation lights (running and anchor)
Independently controlled interior/exterior dimmable LED walkway lights
Red/white overhead dome light
Four (4) flood lights - one (1) port, one (1) starboard and two (2) aft deck
SECTION 11: ELECTRONICS/ NAVIGATION/ COMMUNICATION
Magnetic compass w/ dimmable backlighting
Navigation horn
SECTION 12: SAFETY/ RESCUE/ DIVING EQUIPMENT
Two (2) fire extinguishers
Life ring mount
Telescoping swim ladder mounted on outboard bracket
SECTION 13: FUEL SYSTEM
150 - gallon fuel tank with a formed bottom (1/4" - 5086)
SECTION 14: UPGRADE TO MANUAL DROP BOW
Includes: Upgrade from Standard Metal Bow Configuration with Anchor
Locker to Manual Drop Bow with handrail and Side Lockers. Necessary
Hardware and Installation.
SECTION 15: SEAT STORAGE LOCKER IN FRONT OF CONSOLE. (CC/TT)
Seat Storage Locker w/ Fabricated Lid in Front of Console on either Center
Console or T-Top Models. Locker Lid has Gas Strut, SS Latches, and Non-
Skid Surface. Includes Necessary Hardware and Installation.
SECTION 16: ALLSALT ADJUSTABLE FOOTREST W/ 20" TREAD, 6"
HEIGHT ADJUSTMENT, 0 DEG INCLINE MOUNTED
Includes: (1) Allsalt Footrests with 20" Tread, 6" Height Adjustment and 0
Deg Incline Mounted, Necessary Hardware and Installation.

SPECIFICATIONS FOR: BID NO. 25-0147-4
SECTION 17: ALLSALT 6300 SUSPENSION SEAT, HEIGHT ADJUST,
ARMRESTS, HAND GRIPS, BLACK UPHOLSTERY
Includes: (1) Fold-Down 6300 Seat Bucket with 8" Suspension Travel,
Clear Anodized Aluminum Metal, Black Marine Grade Upholstery, Height
Adjustment, Armrests, Hand Grips, Lapbelt, Cup Holder.
Collar Color Grey
SECTION 18: 10FT BEAM BOATS PERSONNEL RECOVERY CUTOUT
Personnel recovery collar cutouts. Facilitates PIW recovery.
Includes removable port and starboard inserts for use underway.
SECTION 19: BLACK RUB-STRAKE
SECTION 20: ANTI-FOULING BOTTOM PAINT, BLACK, ON 25 CC - 10 WIDE
Includes: Surface Preparation to Manufacturers Specifications and Black
Sherwin Williams SeaVoyage (SeaGuard), Heavy Metal Free (HMF), Antifouling,
Ablative Paint on All Wetted Surfaces Below Collar.
SECTION 21: BLACK RUBBERIZED DASH SKID
SECTION 22: BLACK NON-SKID
SECTION 23: BLACK RUBBERIZED RAIL WRAP
SECTION 24: 110VAC SHORE POWER KIT - 3 BATTERY SYSTEM
W/CHANGER
SECTION 25: 110VAC SHORE POWER KIT-(FOR DUAL ENGINES W/ SINGLE
HOUSE BATTERY, NO GENERATOR). KIT
Includes: 110vac 30amp Shore Inlet, A/C Panel w/ Analog
Voltmeter, GFCI Outlet w/ Cover, Isolation Transformer and 30A 125V 25'
Shore Power Cord. One (1) Three (3) Bank Charger, Conditions, Maintains
and Re-conditions. With automatic Dockside Power Supply Mode for 12
Volt DC Lighting and Appliances. Includes Necessary Hardware and
Installation.

SPECIFICATIONS FOR: BID NO. 25-0147-4
SECTION 26: UPGRADE SHORE POWER KIT W/ 50' 30AMP SMART PLUG
SHORE POWER CORD & INLET
Includes: Upgrade to Shore Power Kit (Sold Separately) from (1) 25'
30amp Shore Power Cord and Inlet to (1) 50' 30amp Smart Plug Shore
Power Cord and Smart Plug Inlet, Necessary Hardware and Installation.
SECTION 27: ONE (1) PRO MARINER TRUE POWER COMBI 2000W
INVERTER/CHARGER 110VAC/12VDC & ADD'L HOUSE
BATTERY
Includes: (1) Pro Mariner True Power Combi 2000W Inverter/Charger
110VAC/12VDC, (1) Additional Optima Blue Top (Deep Cycle) Battery with
Battery Hold Down Tray, Wired in Parallel with Existing 12VDC House
Battery Creating a Dual Battery, 12VDC, Single House Battery Bank, (1)
Remote 110VAC GFCI Outlet.
SECTION 28: CUSTOM FLOOD/BLUE LIGHT SWITCH PANEL WITH (5)
TOGGLE SWITCHES
Custom Fabricated Five (5) Switch Panel with Toggle Switches for Flood
Lights and Blue Law Enforcement Lights. Switches to be Arranged in a
Diamond Shape Pattern. Forward Flood Lights Controlled by Top Switch,
Aft Flood Lights Controlled by Bottom Switch, Port Floods Controlled by
Port Switch, Starboard Floods Controlled by Starboard Switch, and All Blue
Law Enforcement Lights Controlled by Middle Switch
Standard Flood Light Switches and Strobe Switch on OHIP Switch Panel to be Eliminated
SECTION 29: UPGRADE TO DR LED "KEVIN" 600+ LUMENS LED FLOOD
LIGHTS
Upgrade From Standard SBI 55watt Halogen Flood Lights to Dr LED
"Kevin" 8001344 600+ Lumens LED Flood Lights. Includes Necessary
Hardware and Installation.
SECTION 30: ACR RCL-100 LED REMOTE CONTROL SEARCHLIGHT,
220,000 CD, 12/24VDC
ACR RCL-100 LED Remote Control Searchlight, 220,000 CD, 12/24VDC.
Includes: (1) ACR P/N 1951 RCL-100 LED Remote Control Searchlight
with (1) Master Controller, (1) Wired Point Pad, Necessary Hardware and
Installation.

SPECIFICATIONS FOR: BID NO. 25-0147-4
SECTION 31: INSTALL POLICE/AGENCY RADIO & ANTENNA
Includes: Power from 12VDC Distribution Panel to Radio Mounting
Location, Necessary Hardware and Installation of (1) Police Radio and Antenna.
Radio Components Not to Exceed (1) Radio Head with Mic, (1)
Radio Body or Amp (if Separate from Radio Head), (1) External Radio
Speaker, and (1) Antenna with Mount.
Chatham County Marine Patrol will supply the manufacture for installation.
SECTION 32: FLIR M364 SINGLE PAYLOAD STABILIZED 640 THERMAL 24
DEG FOV CAMERA W/O JCU
Includes: (1) FLIR E70525 M364 Single Payload, Stabilized Thermal
Camera (640 x 480, 30Hz, 24 Deg FoV) with Pan, Tilt and Electronic
Zoom, (1) SBI Fabricated FLIR M300 Series Weld-On Riser Bracket
Installed on Cabin Top, Necessary Hardware and Installation.
SECTION 33: WHELEN LOUDHAILER SYSTEM. WPA112, WPA2, SA315
Whelen 100watt Loudhailer System. Includes WPA112 Amplifier, WPA2
Control Head w/ Flush Mount Kit and SA315 Speaker. Includes Necessary
Hardware and Installation.
SECTION 34: SS60 20DEG SS 600W THRU-HULL TRANSDUCER
Includes: (1) SS60 20Deg SS 600W Thru-Hull Transducer, Necessary
Hardware and Installation.
SECTION 35: ICOM M510 EVO VHF/AIS MARINE TRANSCEIVER,
INTEGRATED AIS W/ VHF/AIS WIDE BAND ANTENNA
Includes: (1) Icom IC-M510 EVO VHF Marine Transceiver w/Integrated AIS
Receiver, (1) Flush Mount Kit, (1) VHF/AIS Marine Band Antenna, (1)
Heavy Duty S/S Ratchet Mount, (1) External VHF Speaker.

SPECIFICATIONS FOR: BID NO. 25-0147-4
SECTION 36: GARMIN GPSMAP 8612XSV 12" TOUCH HD
CHARTPLOTTER/SONAR COMBO W/ PRELOADED HD MAPS
Includes: (1) Garmin 010-02092-03 GPSMAP 8612xsv 12" HD
Touchscreen Chartplotter/Sonar Combo with Built-In Support for Sonar,
Including Dual-Channel 1 kW Traditional CHIRP, CHIRP ClearVu and
CHIRP SideVu Scanning Sonars Plus Built-In Support for Ultra High-
Definition Scanning Sonar (No black Box Required), Preloaded BlueChart
g3 US Coastal & LakeVu HD Maps, Necessary Hardware and Installation.
SECTION 37: GARMIN GPS 24XD NMEA 2000 POSITION RECEIVER &
ANTENNA W/ MULTI-BAND GNSS & HEADING
Includes: (1) Garmin 010-02316-10 GPS 24xd NMEA 2000 Position
Receiver and Antenna with Multi-Band GNSS and Heading, Necessary
Hardware and Installation.
SECTION 38: GARMIN PLASTIC THRU-HULL MOUNT TRANSDUCER W/
DEPTH & TEMP (8-PIN) - AIRMAR P319
Garmin Plastic Thru-hull Mount Transducer with Depth & Temperature (8-
pin) - Airmar P319. Includes Necessary Hardware and Installation.
SECTION 39: GARMIN GMR FANTOM 24 - 24" DOME RADAR W/
MOTIONSCOPE TECHNOLOGY
Includes: (1) Garmin 010-01707-00 - GMR Fantom 24, 24", 40W Solid-
State, Dome Radar with 20' to 48 Nautical Mile Detection Range, (1) 15m
Power Cable, (1) 15m Network Cable, Necessary Hardware and Installation
SECTION 40: GARMIN GT51M-TM TRANSOM MOUNT CHIRP
DOWNVU/SIDEVU TRANSDUCER
Includes: (1) Garmin GT51M-TM Transom Mount DownVu/SideVu
Transducer (12-Pin), 500W (CHIRP 260/455 kHz) Traditional 600W (Midband
CHIRP 80-160 kHz) with Temp, Necessary Hardware and Installation.
SECTION 41: FLIR JCU-4 WITH POE INJECTOR KIT
Includes: (1) FLIR JCU-4 Marine Joystick Control Unit, (1) Weather Cover,
(1) 3M Right Angled RayNet to RJ45 Adapter Cable, (1) 3M Right Angled
3-Pin Power Cable, (1) 5-Port Ethernet Switch and (1) PoE 12 to 24 Volt
Injector Kit which is included within the JCU-4.

SPECIFICATIONS FOR: BID NO. 25-0147-4
SECTION 42: WHELEN F4MBBBBP MINI EDGE FREEDOM IV SUPER-LED
22" LIGHTBAR, BLUE
Whelen F4MBBBBP Mini Edge Freedom IV Super-LED 22" Lightbar, Blue,
Mounted on Radar Arch Pod Face for Maximum 360 Degree Visibility.
Includes Necessary Hardware and Installation.
SECTION 43: WEBASTO AT2000 DIESEL HEATER W/ 2.5 GAL TANK
Includes: Webasto Air Top 2000, 7,000 BTU (2kW) Forced Air
Diesel Heater and Defroster w/ 2.5 Gallon Diesel Tank, Necessary Hardware and Installation.
SECTION 44: DIVE LADDER SS GARELICK 4-RUNG W/ STORAGE MOUNT
Dive Ladder SS Garelick 4-Rung with Mount on PORT Side of Outboard
Bracket. Includes Storage Mount while not in use, Necessary Hardware and Installation.
SECTION 45: DIVE LADDER PRC PLATFORM
Dive Ladder PRC Platform with Locking Pins and Lanyards.
SECTION 46: CANVAS ENCLOSURE FOR T-TOP
Full Canvas Enclosure for T-top Includes Roll Upside and Aft Curtains
Encapsulating T-Top. Available colors: Grey, Green or Black
Roll-up sides, BLACK.
SECTION 47: MERCURY SEAPRO 300 AMS
Includes: (2) Mercury SeaPro (Digital Shift & Throttle) 300 Engine, (2) SS
Prop
SECTION 48: UPGRADE TO STAINLESS STEEL STEERING WHEEL
Upgrade to Schmidt Style Destroyer Stainless Steel Steering Wheel with
Power Knob. Includes Necessary Hardware and Installation. Dual Rigging kit.
SECTION 49: MERCURY NEXT GEN DTS, V8, TWIN 250/300HP, AMS WITH
ELECTRIC STEER
Includes: (1) Mercury V8 DTS Rigging Kit, Single Station with E-Steer,
Twin Actuators, Tilt Helm, Steering Wheel, Dual Binnacle, (1) Vessel View
Display, (1) Dual Key Switch Assembly w/ Safety Lanyard, (2) Dedicated
Starting Batteries, Necessary Hardware and Installation.

SPECIFICATIONS FOR: BID NO. 25-0147-4
SECTION 50: ONE (1) BLAC-RAC MARINUS 1091M WEAPONS MOUNT WITH
NON-ELECTRIC PROPRIETARY KEY LOCK & T-CHANNEL
MOUNT
Includes: (1) Blac-Rac Model 1082M Marinus Tactical Weapons Mount
with Non-Electric Proprietary Key Lock, (1) Blac-Rac 25018 18" T-Channel
Mount, Hardware and Installation.
Weapons, Windham 5.56 & Mossberg 590
SECTION 51: ANCHOR KIT 17'-25'
Anchor Kit for 17'-25' Hulls. Kit Includes: (1) Fortress FX7 4lb Anchor, (2)
3/8" S/S Shackle, (9 FT) S/S Anchor Chain, (1) 3/8" S/S Eye-To-Jaw
Swivel, and (150') 5/8" 3 Strand w/ S/S Thimble.
SECTION 52: DOCKING KIT FOR 17'-38' HULLS
Docking Kit for 17'-38' Hulls. Kit Includes: Four (4) 30' x 5/8" DBN Dock
Lines w/ Eye Splice at One End (Black), Four (4) 5.5" x 20" 2-Eyed Ribbed
Black Fenders, and Four (4) 3/8" x 9' Fender Whips (Black)
SECTION 53: OFFSHORE SAFETY KIT
Safety Kit. Kit Includes: 24" Life Ring Buoy with Distress Marker Light,
Portable Bilge Pump, 10-Person First Aid Kit, Offshore Marine Flare Signal
Kit and Handheld Compressed Air Horn
SECTION 54: TRAILER- ALUM. 25'-27'
Trailer 25 - 27 Aluminum Bunk Trailer with Disc Brakes, Bow Ladder, V-Stop and
LED Lighting.
Trailer, galvanized rims.
SECTION 55: SHIPPING PREP/FULL SHRINK WRAP
Preparation for shipping includes:
(1) Disconnect batteries from electrical system.
(2) Secure loose gear to prevent shifting during shipment.
(3) Secure boat to trailers. (If Applicable)
(4) Secure equipment (e.g., motors, spotlight, etc.) as necessary to