Request for Qualifications
Request for Qualifications (RFQ)
On-Call Stormwater Engineering Services
Published: February 9, 2026
Due March 10, 2026 by 4:00 P.M.
1|Page
Request for Qualifications
Contents
OVERVIEW AND PURPOSE ........................................................................................................................3
SCOPE OF WORK.......................................................................................................................................3
CONTRACT REQUIREMENTS .....................................................................................................................4
EVALUATION CRITERIA AND PROCEDURES...............................................................................................5
2|Page
Request for Qualifications
OVERVIEW AND PURPOSE
Notice is hereby given that the City of Monroe located at 300 West Crowell Street in Monroe,
North Carolina 28112 is seeking qualifications from highly qualified and experienced firms or
teams to assist with stormwater management and environmental engineering consulting
services on an on-call basis. The consulting firm(s) selected for the on-call contract will serve as
an extension of City of Monroe staff. This on-call contract is intended to provide a flexible and
effective way for the City to respond to a range of engineering needs with an available
consultant (s) ready to provide multi-dimensional services, as needed.
SCOPE OF WORK
This Scope of Work defines the services to be provided by the Consultant on an on-call, as-
needed basis to support the City’s stormwater management program. The scope and fee will be
determined separately for each assignment prior to notice to proceed (NTP). At the direction of
the City, project scopes may include, but not limited to, the following core service areas:
1. Topographic Survey and Mapping – to include Boundary & Right‑of‑Way Services,
preparing plats, legal descriptions, and exhibits for easements, acquisitions, and
dedications, collecting horizontal and vertical data for engineering design, and
delivering digital mapping files compatible with City CAD/GIS standards.
2. Asset Management & Planning – managing asset inventory condition, performance, and
remaining useful life of stormwater assets to prioritize capital improvement projects using
risk-based and cost-benefit analysis; create long-term stormwater management plans,
including funding strategies; support GIS integration for mapping and tracking
stormwater assets; conduct utility rate studies as needed to evaluate and recommend
equitable stormwater service charges that align with program needs and long-term
financial sustainability.
3. Hydrologic & Hydraulic Analysis - Perform modeling of stormwater runoff and drainage
systems to evaluate capacity of existing and proposed conveyance and detention
facilities.
4. Design & Engineering - Engineering, surveying, mapping, design, planning, permitting,
cost estimation, contract administration, and inspections associated with locally
administered stormwater infrastructure projects.
5. Regulatory Compliance & Permitting - Prepare documentation for permits (NPDES, State
and Local environmental and other permits) and coordinate with regulatory agencies to
ensure compliance. Support reporting requirements for stormwater programs.
6. Construction Support - Provide bid documents, technical specifications, and cost
estimates; provide construction contract bid support; review contractor submittals and
shop drawings, conduct site visits during construction to verify compliance with design
intent.
7. Post-Construction & Maintenance Planning - manage post-construction SCM inventory
condition, performance; support GIS integration for mapping and tracking stormwater
facilities.
3|Page
Request for Qualifications
8. Other related stormwater management services as needed.
Questions concerning the scope of this project should be directed in writing to Bonnie Fisher, PE,
Stormwater Engineering Manager, no later than February 24, 2026. Any amendments to the RFQ
shall be made in writing and distributed as an addendum.
Bonnie Fisher, PE, Stormwater Engineering Manager
City of Monroe
PO Box 69
Monroe, NC 28111-0069
704-282-4537
Email: bfisher@monroenc.org
CONTRACT REQUIREMENTS
The firm(s) selected for an on-call contract will be required to enter into a master contract with
the City of Monroe. The master contract will:
1. Fulfill the consultant solicitation and selection process for the work to be performed under
the on-call contract.
2. Establish current hourly rates as well as a method of calculation and payment for all
other direct/indirect project expenses.
Work performed under the Master Contract will be conducted in one of the following ways:
1. Small tasks not representing a complete project will be based on hourly rates as provided
in the master contract or applicable to supplemental agreement. Such hourly
agreements will be established through a supplemental agreement/project work plan to
be updated annually.
2. Specific projects and/or deliverables identified by the City of Monroe will be negotiated
through scope-fee discussions and arranged through supplemental agreements.
Supplemental agreements will identify work scope, timeframe, deliverables, and total
cost.
The selected firm(s) will report directly to the City of Monroe. The selected firm(s) is to administer
the contract and ensure that all work is performed in accordance with contract requirements.
The selected engineering firm will be responsible for providing engineers, surveyors, planners,
technicians, and other professionals with the appropriate skills and qualifications to ensure
contract compliance. The engineering firm will be directly responsible for project oversight on
behalf of the City of Monroe.
Any firm wishing to be considered must be properly registered with the Office of the Secretary of
State and with the North Carolina Board of Examiners for Professional Engineers and Land
Surveyors. Any proposed corporate subsidiaries or subcontractors must also be properly
registered with the appropriate NC Board of Registration for their role in the project. The
engineers performing the work and in responsible charge of the work must be a registered
4|Page
Request for Qualifications
Professional Engineers in the State of North Carolina and must have a good ethical and
professional standing. It will be the responsibility of the selected private firm to verify the
registration of any corporate subsidiary or subcontractor prior to submitting a qualifications
package.
The firm must have the financial ability to undertake the work and assume the liability. The
selected firm will be required to furnish proof of insurance coverage in the minimum amounts listed
below:
Coverage
Workers’ Compensation
Employers’ Liability
General Liability
Automobile Liability
Professional Liability (E&O)
Minimum Limits
Statutory Limits
$500,000
$1,000,000 per occurrence/$2,000,000 aggregate
$1,000,000
$1,000,000 per occurrence/$2,000,000 aggregate
The firm and sub-consultants shall not discriminate on the basis of race, religion, color, national
origin, age, disability, or set in the performance of any contract entered into under this pre-
qualification process.
EVALUATION CRITERIA AND PROCEDURES
Submission Requirements:
RFQ responses should be submitted as a comprehensive document or package and
demonstrate the ability and intent to complete the required Scope of Work.
All questions regarding the qualifications specifications shall be directed to Bonnie Fisher in
writing at bfisher@monroenc.org no later than February 24, 2026.
RFQ responses shall be submitted no later than 4:00 p.m. March 10, 2026, to:
City of Monroe Stormwater Engineering
Attn: Bonnie Fisher, PE
P.O. Box 69
Monroe, NC 28111
Or RFQ responses may be delivered to:
City of Monroe Stormwater Engineering
Attn: Bonnie Fisher, PE
300 W. Crowell Street
Monroe, NC 28112
Late submittals will not be accepted. The City of Monroe reserves the right to reject any or all
responses and to waive any irregularities.
5|Page
This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.