Tilt Deck Trailer

The Goods must meet or exceed the following specifications.

1.1.1        Tilt trailer with a length of 20 to 22 feet useable deck space
1.1.2        Minimum payload capacity of 12,000 lbs (Trailer Gross Vehicle Rating (GVWR) shall NOT to exceed 17,500 lbs)
1.1.3        Fixed deck length of 4 to 6 feet
1.1.4        Tilt deck length of 16 feet
1.1.5        Tilt trailer with a width of 81 inches inside clearance useable deck space (Deck-over trailers will NOT be accepted)
1.1.6        Hydraulic cushion cylinder(s)
1.1.7        Fir plank decking
1.1.8        Tandem axle trailer
1.1.9        7000 to 8000 lb torsion axles
1.1.10        Forward Self Adjusting (FSA) electric brakes on all axles
1.1.11        E-Z lube axle bearings or oil bath acceptable
1.1.12        Mud flaps
1.1.13        Front mounted heavy duty toolbox
1.1.14        Minimum 6 tie down points
1.1.15        2 5/16 inch hitch
1.1.16        12,000lb with Spring loaded drop leg jack with side wind
1.1.17        14 ply trailer tires
1.1.18        14 ply trailer spare tire mounted on rim
1.1.19        Spare tire mount on trailer
1.1.20 Document holder

Delivered on or before March 31, 2027.

Please refer to Section 6.2 of the RFQ for e-submission file and upload rules.

Email: FP.Purchasing@gov.ab.ca and include "SR5716852548 Tilt Deck Trailer - Question" in the subject line.

All questions and any form of communication must be in writing and directed to the Buyer identified in the RFQ prior to October 5, 2026 at 12:00 pm. All questions and their corresponding responses may be provided to all Proponents.