Remanufacture and Upgrade of B-52 Wing Flap PDU NSN: 1680-00-605-9700FG, P/N 5-48705-54 and Upgrade NSN: 1680-00-605-9700FG, P/N 5-48705-54

Active

Contract Opportunity

The United States Air Force through Air Force Sustainment Center (AFSC), Tinker AFB 73145 is contemplating a 5-year Requirements type contract with a 3-year Basic and One 2-year Option for Remanufacture and Upgrade of B-52 Wing Flap PDU NSN: 1680-00-605-9700FG, P/N 5-48705-54 and Upgrade NSN: 1680-00-605-9700FG, P/N 5-48705-54. The contractor shall provide all labor, facilities, equipment and all material to accomplish remanufacture. The work encompasses the disassembly cleaning, inspection, maintenance re-assembly, testing, and finishing actions required to return the item to a like-new condition in accordance with the solicitation requirements and all attachments.

The requirements set forth in this notice are defined per Purchase Request FD20302501644 as follows:

Written response is required.

Item 0001: NSN: 1680-00-605-9700FG, P/N 5-48705-54

3 Year Basic: BEQ 33 EA

One – 2 Year Option: BEQ 22 EA

Item 0002: Upgrade NSN: 1680-00-605-9700FG, Input P/N 5-48705-53, Output P/N 5-48705-54,

3 Year Basic: BEQ 3 EA

One – 2 Year Option: BEQ 2 EA

Item 0003: Over and Above. To be negotiated.

Item 0004: Data (Not Separately Priced)

NSN: 1680-00-605-9700

Function: Flap drive actuator positions the flaps on the B-52 aircraft.

Dimensions: 30.0” h x 27.0” w x78.0” l and weighs 210 lbs.

Material: Steel and aluminum

LI 0001 Deliver 1 unit(s) 5ea/60days ARO Reps. Early delivery is acceptable

LI 0002 Deliver 1 unit(s) TBD/ As needed. Early delivery is acceptable

Ship To: SW3211

Duration of Contract Period: 5 Year Requirements Contract (3 Year Basic with One – 2 Year Option)

Qualification Requirements: QUALIFICATION REQUIREMENTS APPLY. Interested vendors that have not been previously qualified for this acquisition must submit a Source Approval Request (SAR) package to the Source Development, Small Business Office at 405-739-7243. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification.

Part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from approve sources.

This is a competitive requirement to approved Small Businesses.

In order to receive any technical data related to this acquisition, offerors must send an email request to matthew.churchwell.2@us.af.mil Release of any data is subject to applicable data rights. The request shall be on company letterhead and include the applicable solicitation number, the specific data needed (including TO and/or drawing numbers), and a copy of the current, approved DD Form 2345. The form, including instructions for completing the form, is available at: http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html.

The Government is not responsible for incomplete, misdirected, or untimely requests.**

Some units of items listed in Section B may, upon disassembly and/or inspection, be determined to be beyond repairable limits specified in the Work Specification and/or Technical Orders. Any cost for work performed by the Contractor, prior to determination that such equipment is beyond repairable limits, shall be included in the unit price(s) of the listed item(s). Condemned units will not be counted as production.

Export Control: N/A

The RMC is R1/C.

Set-aside: N/A

The Government intends to issue a solicitation on or about 24 April 2026 with a closing response date of 24 June 2026 and estimated award date of on or about 27 August 2026. This notice does not in itself represent the issuance of a formal request for proposal and is not intended to be taken as such.

Based upon market research, the Government will not be using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

All questions regarding this notice are to be submitted in writing via E-mail. All questions submitted to this office are subject to be posted in this notice along with the appropriate response(s). Vendor identities will not be disclosed. Prospective offerors must comply with all the requirements of the solicitation and any attachments thereto to be considered responsive. All offerors are to specify in their response whether they are a large business, small business, small-disadvantaged business, 8(a) concern, women-owned small business, HUBZone small business, veteran-owned small business or service-disabled veteran-owned small business. Also, offerors must specify whether they are a U.S. or foreign-owned firm.

APPLICABLE TECHNICAL ORDERS

Specific Technical Orders

PART NUMBER REMANUFACTURE MANUAL/ TITLE/REVISION AND/OR OTHER

TO NUMBER DIRECTIVES (AFTO FORM 252)

5-48705-53 or 5- 16A1-13-7-3 Overhaul Instructions, 1NOVEMBER 2014

48705-54 16A1-13-7-4 Illustrated Parts Breakdown, 1 JANUARY 2015

General Technical Orders

TO NUMBER DATE TITLE

00-5-1 19 NOVEMBER 2024 AF TECHNICAL ORDER SYSTEM

00-5-3 20 JANUARY 2025 AF TECHNICAL ORDER LIFE CYCLE MANAGEMENT

00-26-260 10 MAY 2022 METHODS AND PROCEDURES

MANUAL -- UNIQUE IDENTIFICATION ASSET

MARKING AND TRACKING

00-35D-54 15 FEBRUARY 2024 USAF DEFICIENCY REPORTING, INVESTIGATION

*Publication dates are current as of the date of this Appendix A form revision. AND RESOLUTION

OTHER PUBLICATIONS FOR INFORMATION PURPOSES ONLY

NOTE: These publications are for information purposes only.

Air Force Manuals

DOCUMENT NUMBER DATE TITLE

AFI 23-101 21 OCTOBER 2020 MATERIAL MANAGEMENT POLICY

AFMAN 23-122 26 OCTOBER 2020 MATERIAL MANAGEMENT PROCEDURES

*Publication dates are current as of the date of this Appendix A form revision.

DoD/GSA/Air Force Forms

FORM NUMBER TITLE

SF 328 CERTIFICATE PERTAINING TO FOREIGN INTERESTS

SF 364 REPORT OF DISCREPANCY

SF 368 QUALITY DEFICIENCY REPORT

DD1348-1A ISSUE RELEASE/RECEIPT DOCUMENT

DD1423 CONTRACT DATA REQUIREMENTS LIST (CDRL)

DD1694 REQUEST FOR VARIANCE (RFV)

DD250 MATERIAL INSPECTION AND RECEIVING REPORT

DD254 DOD CONTRACT SECURITY CLASSIFICATION SPECIFICATION

DD1574 SERVICEABLE TAG – MATERIEL

DD1574-1 SERVICEABLE LABEL – MATERIEL

DD1577-2 UNSERVICEABLE (REPAIRABLE) TAG – MATERIEL

DD1577-3 UNSERVICEABLE (REPAIRABLE) LABEL – MATERIEL

DD1577 UNSERVICEABLE (CONDEMNED) TAG – MATERIEL

DD1577-1 UNSERVICEABLE (CONDEMNED) LABEL – MATERIEL

DD1575 SUSPENDED TAG – MATERIEL

DD1575-1 SUSPENDED LABEL – MATERIEL

AFMC FORM 158 PACKAGING REQUIREMENTS

Other Government Publications

PUBLICATION NUMBER TITLE

MIL-STD-130 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

NIST SP 800-53 Rev. 5 SECURITY AND PRIVACY CONTROLS FOR INFORMATION SYSTEMS AND ORGANIZATIONS

NIST SP 800-61 Rev. 3 INCIDENT RESPONSE RECOMMENDATIONS AND CONSIDERATIONS FOR CYBERSECURITY RISK MANAGEMENT

NIST SP 800-161 Rev. 1 CYBERSECURITY SUPPLY CHAIN RISK MANAGEMENT PRACTICES FOR SYSTEMS AND ORGANIZATIONS

NIST SP 800-171 Rev. 3 PROTECTING CONTROLLED UNCLASSIFIED INFORMATION IN NONFEDERAL SYSTEMS AND ORGANIZATIONS

CONTRACTOR DOCUMENTS

PART NUMBER DRAWING NUMBER TITLE AND DATE

N/A N/A N/A

OMBUDSMAN (AUG 2005) (An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition). The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 405-736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS.

Electronic procedures will be used for this solicitation. No telephone requests. Only written or emailed requests received directly from the requestor are acceptable.

Attachments/Links