Square Sign Posts
| Location: | Kentucky |
|---|---|
| Posted: | Sep 9, 2026 |
| Due: | Sep 23, 2026 |
| Agency: | State Government of Kentucky |
| Type of Government: | State & Local |
| Category: |
|
| Solicitation No: | RFB-605-2700000117-1 |
| Publication URL: | To access bid details, please log in. |
| General Information | |
| Document ID | RFB-605-2700000117-1 |
| Status | Open |
| Description | Square Sign Posts |
| Department | Transportation - Office Of The Secretary |
| Type | Request for Bids (RFB) |
| Issue Date | 09/09/2026 12:00 AM EDT |
| Closing Date | 09/23/2026 01:30 PM EDT |
| Buyer Name | PAIGE GRASS |
| Buyer Email | paigej.grass@ky.gov |
| Buyer Phone | 502-564-5243 |
| Location | Bid Receiving, See Terms & Conditions for Bid Submission Instructions, Other, KY |
| Commodity Codes | ||
| Code | Description | Extended Description |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) |
Specifications attached at the header.
****************************************************** ***ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB.*** Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. During Phase 1 bidders must enter $0.01 for price and zero (0) for delivery in the e-procurement system. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site (updated).pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct. DO NOT SUBMIT PRICING DURING PHASE 1. This RFB will be conducted as a Multistep Competitive Sealed Bid in accordance with 200 KAR 5:375 also referred to as a REVERSE AUCTION. The Commonwealth has partnered with eBridge to host this bidding event on its Web-Based Bidding Platform. Vendors who have not previously registered must register with eBridge by emailing tara.obannon@ebridgeglobal.com Review the Attachment (eBridge Bid Instructions). The awarded supplier is obligated to pay a transaction fee to eBridge pursuant to the Terms and Conditions accepted upon placement of initial bid. This RFB will consist of two phases: Phase 1: VENDORS SHALL SUBMIT UNPRICED OFFERS per instruction in Section 3.04. Prices will be accepted only from bidders whose unpriced technical offer is found acceptable during Phase 1. Phase 2: PRICES WILL ONLY BE ACCEPTED IN THE SECOND PHASE DURING THE ONLINE REVERSE AUCTION BIDDING EVENT. If only one (1) responsive bid is received, the online reverse auction will be cancelled and the Division of Purchases, will request pricing from the vendor via email. The criteria that will be used to evaluate the offers at the conclusion of the online bidding event are located in section 5.00. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Specifications attached at the header. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Specifications attached at the header. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Specifications attached at the header. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Specifications attached at the header. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Specifications attached at the header. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Specifications attached at the header. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Specifications attached at the header. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Specifications attached at the header. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | The Anchor Sleeve receives the 2" x 2" sign posts and must be compatible with the 2" square sign posts in Items 1-5. See Section 1.0 for specifications. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) |
Must fit the 2.25" x 2.25" anchor sleeve in Item 11 and be attached to two adjoining sides of the anchor.
T009 - the Soil Stabilizer details depicted on the right side of the drawing correlate with Line 11 |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | This item shall be the 8" Redi Torque Model 280 Slip Base for installation in new concrete by Xcessories Squared - Product Number RT8UX-25C48C-G. This is KYTC's Type D omni-directional slip base that is MASH compliant and has a triangular slip plate with 8" sides. This Item is used with Items 6-9 (2.5" x 2.5" square posts). This item includes a slip base top that accepts 2.5" square posts, a match plate hardware kit (which includes Redi-Torque Model 280 double hex torque-free bolts, flat washers, Teflon-coated plate separators, and large flange nuts), and a unibase anchor for installation in new concrete (i.e. there is not a soil stablizer plate attached to this unibase anchor). |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | This item shall be the 8" Redi Torque Model 280 for installation in soil by Xcessories Squared - Product Number RT8UX-25C42WC-G. This is KYTC's Type D omni-directional slip base that is MASH compliant and has a triangular slip plate with 8" sides. This Item is used with Items 6-9 (2.5" x 2.5" square posts). This item includes a slip base top that accepts 2.5" square posts, a match plate hardware kit (which includes Redi-Torque Model 280 double hex torque-free bolts, flat washers, Teflon-coated plate separators, and large flange nuts), and a unibase anchor that has a preattached soil stabilizer plate for installation in soil. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | This item shall be the 8" Redi Torque Model 280 for installation in existing, hardened concrete by Xcessories Squared - Product Number SMSB8-10-G. This is KYTC's Type D omni-directional slip base that is MASH compliant and for surface mounting a sign assembly onto existing hardened concrete. It has a triangular slip plate with 8" sides. This item is to be used with Items 6-9 (the 2.5" x 2.5" square posts). This item includes a triangular slip base bottom plate stub that is welded to a flat base plate that has four holes for anchoring the suface mount assembly to existing concrete. This item does not include the slip base top that accepts 2.5" square posts (see Item 15). This item does not include the match plate hardware (see Item 16). This item does not include the 5/8" x 6" Threaded Wedge Bolts needed to anchor this surface mount to existing hardened concrete (see Item 26 for the wedge bolts). |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | This item shall be the 8" Redi-Torque Model Model 280 Slip Base Top for 2.5" square posts by Xcessories Squared - Product Number SB8C-250A-G. This item is the slip base top that accepts 2.5" x 2.5" square post and is a component of KYTC's Type D Slip Base assemblies. This Item is typically used to replace missing Type D Slip Base Tops during repair of an existing Type D Slip Base assembly. It is also used when installing a new (or repairing and existing) KYTC Type D Surface Mount (see Item 14). |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | This item shall be the Redi-Torque Match-Plate Hardware - full set by Xcessorites Squared - Product Number RTSB-MPHDW. This match plate hardware kit is a component of KYTC's Type D Slip Base assemblies. This kit is used during the repair of an existing Type D Slip Base assembly OR when installing a new (or repairing an existing) Type D Surface Mount (see Item 14). This is a full hardware set that includes the necessary Redi-Torque Model 280 1/2"-13 x 3" Grade 8 double hex bolts, 5/8" flat washers, 1-3/4" square x 3/16" thick Teflon-coated plate separators, and 1/2"-13 x 3" Grade 8 large flange nuts necessary to replace the match plate hardware of a single Type D Slip Base. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | This item shall be the Redi Torque Model 280 by Xcessories Squared - Product Number RT8UX-25C42WC-G. This is the unibase anchor that is one component of the full Type D Slip Base set in Item 12. This unibase anchor is 48" long and has an 8" triangular slip plate welded to the top. This item will typically be used during repairs where a full Type D Slip Base set is not needed. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | This item shall be the Redi Torque Model 280 by Xcessories Squared - Product Number RT8UX-25C42WC-G. This is the unibase anchor that is one component of the full Type D Slip Base set in Item 13. This unibase anchor is a 42" long and has an 8" triangular slip plate welded to the top and a soil stablizer plate welded to the anchor stem just below the triangular slip plate. This item will typically be used for repairs where a full Type D Slip Base set is not needed. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | This item shall be the Kleen Break Model 425 Sign Post Coupler System by Xcessories Squared - Product Number XKBSM42520-G. This items includes a surface mount anchor with three holes for securing the anchor to existing hardened concrete, a rubber bushing, the Model 425 Shear Bolt, a top receiver that accepts 2" x 2" posts (see Items 1-5), and a locking wedge. See Item 29 for the Kleen Break Shear Bolt Wrench used to tighten the Model 425 Shear Bolt. This item does not included the three 1/2" x 4" threaded wedge bolts needed to secure the anchor plate to existing, hardened concrete - see Item 27 for the threaded wedge bolts. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | This item shall be the Kleen Break Model 425 sign post receiver by Xcessories Squared - Product Number TX175-200-G. This is the top portion of the Kleen Break that accepts 2" x 2" sign posts. This item will tyipcally used to replace missing Kleen Break post receivers during repair of an existing Kleen Break assembly. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | This item shall be the Kleen Break Model 425 shear bolt and associated hardware by Xcessories Squared - Product Number SBH5840-Z. This is the replacement shear bolt for Item 14 and is typically used when repairing an existing Kleen Break. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | This shall be the Kleen Break Model 425 rubber bushing by Xcessories Squared - Product Number RB30-EPDM. This is the replacement rubber bushing for Item 14 and is typically used when repairing an existing Kleen Break. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | This item shall be the Kleen Break Model 425 stem anchor by Xcessories Squared - Product Number CKBA-8-G. The stem anchor is 8 inches long and can be used with either a new concrete installation OR a soil intallation. The stem portion of this anchor is set in either new concrete or inserted into a 2.25" x 2.25" anchor sleeve with soil stablizer plate (see Items 10 and 11) that has been driven into soil. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Must be able to mount square tube sign posts specified in items 1-9 and the post receiver cannot be more than 4" in height. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) |
Galvanized Steel Bracket. All brackets must be able to mount square sign posts specified in Items 1-9. Must be able to anchor to top and one side of barrier wall. Bracket will be 3/8" thick and is either 4" x 7" or 2.5" x 2.5".
T013 - the Barrier Mounting Bracket details depicted on the right side of drawing correlates with Line 25. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Must have a rust resistant finish. To be used to attached the base plate of Item 14 onto existing, hardened concrete. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Must have a rust resistant finish. To be used to attached the Kleen Break anchor that is within Item 19 onto existing, hardened concrete. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | This item shall be the Post Locking Wedge for Square Posts by Xcessories Squared - Product Number LWX35F-G. This a replacement locking wedge for use with the Redi-Torque Model 280 Slip Base System (KYTC's Type D Slip Base) or for use with the Kleen Break Model 425 Sign Post Coupler System. This item is usually used when repairing an existing Type D Slip Base or an existing Kleen Break. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | This item shall be the Kleen Break Shear Bolt Wrench by Xcessories Squared - Product Number XKBW-1516. This is the tool used to reinstall the Kleen Break Shear Bolt (see Item 21) when repairing an existing Kleen Break. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | For securing telescoping sections of sign posts. Bolt must have a rust resistant finish and have a 90 degree bend designed for placement in 7/16" holes on adjacent sides. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Must have a rust resistant finish. For use with corner bolts (see Items 30 and 33). |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | To be used with corner bolts. For use with corner bolts (see Items 30 and 33). |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | 5/16" diameter large corner bolt, 3 inches long. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | 3/8"-16 x 3" HHCS Gr8 Zinc/Yellow |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Case-hardened 3/8" flange nut |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | 2" Aluminum Sign Bracing 12' w/Holes. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Stainless Steel - Must fit the 2" square posts in Items 1-5. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Stainless Steel - Must fit the 2.5" square posts in Items 6-9. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Galvanized Steel Rivets (for additional strength) with attached vinyl washer shall have a rust resistant finish and shall be designed for attaching sign with 3/8 " diameter holes to posts with 7/16 " diameter holes. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | To be used with Item 39. |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | 1/2" x 2" Grade 8 flange bolt |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | 1/2" drop in anchor |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | 1/2" x 5 1/2" expansion anchor |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | 5/16"-18x3 NC Slotted Round Washer |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | 5/16"-18x2.5 NC Slotted Round Washer |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | Banding Bracket, Flaired Leg, > 4" Diameter Pole, Tapped Hole for 5/16th"-18 Bolts |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | 100 Per Box - Hex Head Bolts 5/16"-18 x 3/4" long |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | 100 Per Box - 5/16" Fiber Washer (1/16" x 7/8" OD) |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | 2" x 48" High Intensity Prismatic (Type XI) Red Sign Post Facing, 3 Hole |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | 2" x 48" High Intensity Prismatic (Type XI) Yellow Sign Post Facing, 3 Hole |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | 2" x 48" High Intensity Prismatic (Type XI) White Sign Post Facing, 3 Hole |
| 57044 | Posts, Steel (For Delineator Markers, Mile Markers, etc.) | 2" x 48" High Intensity Prismatic (Type XI) Fluorescent Yellow Green Sign Post Facing, 3 Hole |
Daily notification on new contract opportunities
With GovernmentContracts, you can:
- Find more opportunities and win more business
- Receive daily alerts for all new bid opportunities
- Get contract opportunities matched to your business
See also
...FOR FCPS TO ACCEPT/SIGN UNDERSTANDS AND AGREES THAT THIS WILL NOT BE...
Fayette County Public Schools
Bid Due: 10/13/2026
...monitoring guidelines, and design for project signs have been completed, reviewed, and approved...
City of Frankfort
Bid Due: 9/30/2026
...FCPS TO ACCEPT/SIGN UNDERSTANDS AND AGREES THAT THIS WILL NOT BE CONSIDERED OR ...
Fayette County Public Schools
Bid Due: 10/09/2026
...FOR FCPS TO ACCEPT/SIGN UNDERSTANDS AND AGREES THAT THIS WILL NOT BE CONSIDERED ...
Fayette County Public Schools
Bid Due: 10/14/2026
* Disclaimer: Information regarding bids, requests for proposals (RFPs), or requests for qualifications (RFQs) is provided on this website only for convenience and does not constitute official public notice. Persons wishing to respond to or inquire about bids, RFPs, or RFQs should contact the appropriate government department.