Aluminum Snow Machine Trailer

The Goods must meet or exceed the following specifications.
1.1.1        Drive On/Off Salt Shield
1.1.2        All Aluminum Construction
1.1.3        4ft or longer Hidden Ramp w/ Super Glides or similar
1.1.4        Full Length Slide Track Tie Down System
1.1.5        (1) Sliding D-Ring and (1) Ski Tie Down Bar Per Machine
1.1.6        2inch Straight Pull Coupler w/ 2inch Ball
1.1.7        Minimum 1,200 lb Wheel Jack
1.1.8        Rolled Rear Edge Loading Protector
1.1.9        Recessed LED Marker Lights
1.1.10        4-Way Flat Power Connection
1.1.11        Minimum 2inch x 3inch Subframe Tubing
1.1.12        24inch O/C (on center) Crossmembers
1.1.13        5/8inch Marine Grade Decking
1.1.14        Deck Height: up to 29inches
1.1.15        Hitch Height: up to 24inches
1.1.16        Axles: (1) 3000-4000 lb
1.1.17        Torsion Suspension
1.1.18        Minimum15inch Wheels with minimum 6 ply tires
1.1.19        Deck Width × Length: 98-110inches x 11-14ft
1.1.20 Overall Width × Length: 98-110inches x 16-20ft

Delivery on or before March 31, 2027

Please refer to Section 6.2 of the RFQ for e-submission file and upload rules.

Email: FP.Purchasing@gov.ab.ca and include "SR5814736154 Aluminum Trailer - Question" in the subject line.

All questions and any form of communication must be in writing and directed to the Buyer identified in the RFQ prior to September 21, 2026 at 12:00 pm. All questions and their corresponding responses may be provided to all Proponents.