high-speed lock-in/servo system

Active

Contract Opportunity

*****THIS IS A COMBINED SOURCES SOUGHT NOTICE AND NOTICE OF INTENT TO SOLE SOURCE***.

BACKGROUND

The Fundamental Thermodynamics group at the Sensor Science Division is conducting Photonic ac-dc Thermal Transfer Standard (PTTS) project. The main focus of the project is to develop the next-generation chip-scale photonic ac-dc difference metrology that can replace legacy thin-film multijunction thermal converters (MJTCs), reduce the ac-dc difference calibration chain and sensor ownership cost.

The PTTS project, pursued by the Fundamental Thermodynamics group is part NIST-on-a-Chip (NOAC) program. The timely achieving project’s milestones is NIST-mission-critical task and is one of the priorities of the Physical Measurement Laboratory (PML).

One of the essential milestones of Photonic ac-dc Thermal Transfer Standard (PTTS) is to develop high‑precision, deployable photonic readout system. This capability is a critical milestone of the PTTS project, providing the accuracy and stability needed to advance photonics-based ac-dc difference metrology toward practical implementation. To achieve these essential for the project milestones, the Fundamental Thermodynamics group has a critical need for one (1) high-seed lock-in/servo system. This instrument is essential for enabling scalable and practical solutions for next-generation ac-dc difference metrology. Delaying or not approving this procurement would directly hinder progress on key deliverables of the NOAC Photonic ac-dc Thermal Transfer Standard (PTTS) project. Timely acquisition is essential to ensure technical objectives are met and the project remains on track to deliver transformative advances in next‑generation ac-dc difference metrology.

NIST is seeking information from sources that may be capable of providing high-speed lock-in/servo system to support NOAC Photonic ac-dc Thermal Transfer Standard (PTTS) project.

If no alternate sources are identified, the Government intends to issue a Sole Source Award to, Liquid Instruments Inc. (UEI MS6AHD4EF8D7:) under the authority of FAR 12.102(b) The North American Industry Classification System (NAICS) code for this acquisition is 334516.

The high-speed lock-in/servo system must meet the following minimum specifications:

1. Shall include at least 4 Analog inputs with a Bandwidth of at least 600 MHz (for up to 2 channels being in use) and at least 300 MHz (for up to 4 channels being in use)


2. Shall have a sampling rate of at least 1 GSa/s per1 channel


3. Shall have an ADC Resolution of at least 10-bit with a preference for 18 bit or higher.


4. Maximum voltage range 40 Vpp


5. Input Impedance 50 Ω or 1 MΩ


6. Input coupling AC or DC


7. Input voltage noise less than 30 nV√Hz at 100 Hz


8. Input reference noise shall be no greater that 500 µV root-mean-square (RMS)


9. Shall have at least 4 analog outputs channels


10. Output bandwidth with at least 100 MHz with at least +/- 5 volts, and at least 500 MHz with at least +/- 1 volts


11. Output sampling rate of at least 1.25 GSa/s per channel


12. Output resolution at least 16-bit


13. Output Voltage Range at least 10 Vpp into 50 Ω


14. Must have capability of operating in the following configurations:
    
    
    
    1. Lock-in Amplifier
    
    
    2. Arbitrary Waveform Generator
    
    
    3. Oscilloscope
    
    
    4. Frequency Response Analyzer
    
    
    5. Waveform Generator
    
    
    6. PID Controller
    
    
    7. PID controller must have at least the following gain profiles: proportional, Integral, Differential, double-integral
    
    
    8. Phasemeter
    
    
    9. Data Logger
    
    
    10. Spectrum Analyzer
    
    
    11. Digital Filter Box
    
    
    12. Laser Lock Box
    
    
    13. FIR Filter Builder
    
    
    14. Logic Analyzer/Pattern Generator
    
    
    
    


15. Shall have the to operate up to 4 configurations at a time


16. Software control via USB or WiFi

Must be lockable to 10 MHz reference

HOW TO RESPOND TO THIS NOTICE

In responding to this notice, please DO NOT PROVIDE PROPRIETARY INFORMATION. Please include only the following information, readable in either Microsoft Word 365, Microsoft Excel 365, or .pdf format, in the response: Submit the response by email to the Primary Point of Contact and, if specified, to the Secondary Point of Contact listed in this notice as soon as possible, and preferably before the closing date and time of this notice. Please note that to be considered for award under any official solicitation, the entity must be registered and “active” in SAM at the time of solicitation response.

• Provide the complete name of your company, address, name of contact for follow-up questions, their email, their phone number and, if your company has an active registration in https://sam.gov, your company’s Unique Entity ID (UEI).

• Identify the equipment that your company sells that can meet the objectives addressed in the BACKGROUND section of this notice. For each product recommended to meet the Government’s requirement, provide the following:
  
  
  
  • Manufacturer name
  
  
  • Model number
  
  
  • Technical specifications
  
  
  • If your company is not the manufacturer, provide information on your company’s status as an authorized reseller of the product(s)
  
  
  
  

• Describe performance capabilities of the product(s) your company recommends to meet the Government’s requirements. Additionally, if there are other features or functions that you believe would assist NIST in meeting its objectives described above, please discuss in your response.

• Discuss whether the equipment that your company sells and which you describe in your response to this notice may be customized to specifications and indicate any limits to customization.

• Identify any aspects of the NIST market research notice, including instructions, and draft minimum specifications in the BACKGROUND section you cannot meet and state why. Please offer suggestions for how the market research notice and draft minimum specifications could be made more competitive.

• State whether the proposed equipment is manufactured in the United States and, if not, state the name of the country where the equipment is manufactured.

• Identify any plans/possibilities for changes in manufacturing location of the aforementioned equipment and provide relevant details, including timeline.

• For the NAICS code listed in this notice:

• Indicate whether your company is (a) a small business or (b) other than small business. See the Table of Small Business Size Standards and the associated .pdf download file for small business size standards and additional information.

• If you believe the NAICS code listed in this notice is not the best NAICS code for the type of product addressed in this notice, identify an alternative NAICS code that you believe would be more appropriate for the planned procurement.

• Describe services that are available with the purchase of the aforementioned equipment from your company such as installation, training, and equipment maintenance.

• Describe standard terms and conditions of sale offered by your company for the recommended equipment such as: delivery time after your company accepts the order; FOB shipping terms; manufacturer warranty (including details regarding nature and duration); if available, description(s) of available extended warranty; equipment setup and test; operator and service instruction manual(s); cleanup after installation; and if applicable, other offered services. Provide a copy of manufacturer standard terms and conditions that typically relate to the sale of the specified equipment, if available.

• State whether your company offers facility renovation services related to installation of the recommended equipment at its delivery destination, if required per the NIST-identified minimum specifications, and provide description of said services. Indicate if your company performs the facility renovation services or typically subcontracts the work to another company. Indicate if your company would be interested in inspecting the intended installation site during the market research phase.

• State published price, discount, or rebate arrangements for recommended equipment and/or provide link to access company’s published prices for equipment and services.

• If the recommended equipment and related services are available for purchase on any existing Federal Supply Schedule contract(s) or other contracts against which NIST may be able to place orders, identify the contract number(s) and other relevant information.

• Identify any customers in the public or private sectors to which you provided the recommended or similar equipment. Include customer(s) information: company name, phone number, point of contact, email address.

• Provide any other information that you believe would be valuable for NIST to know as part of its market research for this requirement.

• State if you require NIST to provide additional information to improve your understanding of the government’s requirement and/or would like to meet with NIST representatives to discuss the requirement and the capabilities of the identified equipment.

QUESTIONS REGARDING THIS NOTICE

Questions regarding this notice may be submitted via email to the Primary Point of Contact and the Secondary Point of Contact listed in this notice. Questions should be submitted so that they are received 5 days prior to the response date. If the Contracting Officer determines that providing a written amendment to this notice to document question(s) received would benefit other potential respondents, the questions would be anonymized, and a written response to such question(s) would be provided via an amendment to this notice.

IMPORTANT NOTES

This notice is for market research purposes and should not be construed as a commitment by NIST to issue a solicitation or ultimately award a contract. There is no solicitation available at this time.

This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response.

NIST reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate.

Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability.

Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.

After a review of the responses received, a synopsis and solicitation may be published on GSA’s eBuy or SAM.gov. However, responses to this notice will not be considered an adequate response to any such solicitation(s).

Thank you for taking the time to submit a response to this request!

Attachments/Links