RFB-244-25 24038AMLBAML Perry County

Short Mountain 70/30 Dried Sand (or approved equal that meets specifications) Must be kiln dried material. Particles retained on the #18 (1mm) sieve must be between 4-6%. Particles retained on the #35 (0.50mm) sieve must be between 40-50%. Particles retained on the #60 (0.25mm) sieve must be between 45-55%. Particles retained on the #270 (0.05mm) sieve must be less than 1%. Must provide products specification sheet (particle sieve distribution) with bid for this item. Quantity: 25 Tons

Short Mountain 60/40 Sand (or approved equal that meets specifications) Must be white in color. Must have a minimum of 65% sand particle size between 0.25mm and 1.0mm. Must have a have a minimum penetrometer reading from an independent lab of greater than 2.0 kg/cm2. Must have a minimum permeability/infiltration (saturated hydraulic conductivity) rate of 37 inches/hour. Quantity: 75 Tons

Pine Bluff Materials Fine Sand (or approved equal that meets specifications). Particles retained on the #16 (1.18mm) sieve must be less than 2%. Particles retained on the #30 (0.60mm) sieve must be between 7-8%. Particles retained on the #50 (0.30mm) sieve must be between 50-52%. Must provide products specification sheet (particle sieve distribution) with bid for this item. Quantity: 50 Tons

Arms Select Topdressing Sand (or approved equal that meets specifications) Particles retained on the #18 (1mm) sieve must be greater than 2% but not greater than 5%. Particles retained on the #35 (0.50mm) sieve must be greater than 20%. Particles retained on the #270 (0.05mm) sieve must be less than 2%. Must provide products specification sheet (particle sieve distribution) with bid for this item. ***The Department of Parks reserves the right to request a sample of the materials to send off with the gravel used for Better Billy Bunker construction at this site to test for bridging compatibility and to verify specifications prior to the award of the bid. *** Quantity: 75 Tons

Arms Select Topdressing Sand (or approved equal that meets specifications) Particles retained on the #18 (1mm) sieve must be greater than 2% but not greater than 5%. Particles retained on the #35 (0.50mm) sieve must be greater than 20%. Particles retained on the #270 (0.05mm) sieve must be less than 2%. Must provide products specification sheet (particle sieve distribution) with bid for this item. ***The Department of Parks reserves the right to request a sample of the materials to send off with the gravel used for Better Billy Bunker construction at this site to test for bridging compatibility and to verify specifications prior to the award of the bid. *** Quantity: 50 Tons

Arms Select Topdressing Sand (or approved equal that meets specifications) Particles retained on the #18 (1mm) sieve must be greater than 2% but not greater than 5%. Particles retained on the #35 (0.50mm) sieve must be greater than 20%. Particles retained on the #270 (0.05mm) sieve must be less than 2%. Must provide products specification sheet (particle sieve distribution) with bid for this item. ***The Department of Parks reserves the right to request a sample of the materials to send off with the gravel used for Better Billy Bunker construction at this site to test for bridging compatibility and to verify specifications prior to the award of the bid. *** Quantity: 50 Tons

Arms Select Topdressing Sand (or approved equal that meets specifications) Particles retained on the #18 (1mm) sieve must be greater than 2% but not greater than 5%. Particles retained on the #35 (0.50mm) sieve must be greater than 20%. Particles retained on the #270 (0.05mm) sieve must be less than 2%. Must provide products specification sheet (particle sieve distribution) with bid for this item. ***The Department of Parks reserves the right to request a sample of the materials to send off with the gravel used for Better Billy Bunker construction at this site to test for bridging compatibility and to verify specifications prior to the award of the bid. *** Quantity: 75 Tons

Short Mountain 70/30 Dried Sand (or approved equal that meets specifications) Must be kiln dried material. Particles retained on the #18 (1mm) sieve must be between 4-6%. Particles retained on the #35 (0.50mm) sieve must be between 40-50%. Particles retained on the #60 (0.25mm) sieve must be between 45-55%. Particles retained on the #270 (0.05mm) sieve must be less than 1%. Must provide products specification sheet (particle sieve distribution) with bid for this item. Quantity: 75 Tons

Pine Bluff Materials Fine Sand (or approved equal that meets specifications). Particles retained on the #16 (1.18mm) sieve must be less than 2%. Particles retained on the #30 (0.60mm) sieve must be between 7-8%. Particles retained on the #50 (0.30mm) sieve must be between 50-52%. Must provide products specification sheet (particle sieve distribution) with bid for this item. Quantity: 75 Tons

Short Mountain Golf Sand (or approved equal that meets specifications.) Particles retained on the #18 (1mm) sieve must be greater than 2%. Particles retained on the #35 (0.50mm) sieve must be greater than 32%. Particles retained on the #270 (0.05mm) sieve must be less than 1%. Must provide products specification sheet (particle sieve distribution) with bid for this item. Quantity: 110 Tons

Short Mountain Golf Sand (or approved equal that meets specifications.) Particles retained on the #18 (1mm) sieve must be greater than 2%. Particles retained on the #35 (0.50mm) sieve must be greater than 32%. Particles retained on the #270 (0.05mm) sieve must be less than 1%. Must provide products specification sheet (particle sieve distribution) with bid for this item. Quantity: 100 Tons

Pine Bluff Materials Fine Sand (or approved equal that meets specifications). Particles retained on the #16 (1.18mm) sieve must be less than 2%. Particles retained on the #30 (0.60mm) sieve must be between 7-8%. Particles retained on the #50 (0.30mm) sieve must be between 50-52%. Must provide products specification sheet (particle sieve distribution) with bid for this item. Quantity: 200 Tons