Milled Rumble Strips along NC 24/27 from Sweet Home Church...

Location:	North Carolina
Posted:	Nov 19, 2025
Due:	Dec 17, 2025
Agency:	Division of Highways
Type of Government:	State & Local
Category:	93 - Nonmetallic Fabricated Materials Y - Construction of Structures and Facilities
Publication URL:	To access bid details, please log in.

Attachment Preview

DJ00581 R-2530BA

Stanly

STATE OF NORTH CAROLINA

DEPARTMENT OF TRANSPORTATION

HIGHWAY DIVISION 10

PROPOSAL

DATE AND TIME OF BID OPENING: December 17, 2025, AT 2:00 PM

CONTRACT ID: DJ00581

WBS ELEMENT NO.: 34446.3.5

FEDERAL AID NO.: STATE FUNDED

COUNTY:

STANLY

TIP NO.:

R-2530BA

MILES:

4.4

ROUTE NO.:

NC 24/27

LOCATION:

NC 24/27

TYPE OF WORK: Install Rumble Strips on Inside and Outside Shoulders

NOTICE:

ALL BIDDERS SHALL COMPLY WITH ALL APPLICABLE LAWS REGULATING THE PRACTICE OF

GENERAL CONTRACTING AS CONTAINED IN CHAPTER 87 OF THE GENERAL STATUTES OF

NORTH CAROLINA WHICH REQUIRES THE BIDDER TO BE LICENSED BY THE N.C. LICENSING

BOARD FOR CONTRACTORS WHEN BIDDING ON ANY NON-FEDERAL AID PROJECT WHERE THE

BID IS $30,000 OR MORE, EXCEPT FOR CERTAIN SPECIALTY WORK AS DETERMINED BY THE

LICENSING BOARD. BIDDERS SHALL ALSO COMPLY WITH ALL OTHER APPLICABLE LAWS

REGULATING THE PRACTICES OF ELECTRICAL, PLUMBING, HEATING AND AIR

CONDITIONING AND REFRIGERATION CONTRACTING AS CONTAINED IN CHAPTER 87 OF THE

GENERAL STATUTES OF NORTH CAROLINA. NOTWITHSTANDING THESE LIMITATIONS ON

BIDDING, THE BIDDER WHO IS AWARDED ANY FEDERAL - AID FUNDED PROJECT SHALL

COMPLY WITH CHAPTER 87 OF THE GENERAL STATUTES OF NORTH CAROLINA FOR

LICENSING REQUIREMENTS WITHIN 60 CALENDAR DAYS OF BID OPENING.

THIS IS A ROADWAY PROJECT.

BID BOND IS REQUIRED.

NAME OF BIDDER

ADDRESS OF BIDDER

DJ00581 R-2530BA

Stanly

PROPOSAL FOR THE CONSTRUCTION OF

CONTRACT No. DJ00581 IN STANLY COUNTY, NORTH CAROLINA

DEPARTMENT OF TRANSPORTATION,

RALEIGH, NORTH CAROLINA

The Bidder has carefully examined the location of the proposed work to be known as Contract No. DJ00581; has carefully

examined the plans and specifications, which are acknowledged to be part of the proposal, the special provisions, the

proposal, the form of contract, and the forms of contract payment bond and contract performance bond; and thoroughly

understands the stipulations, requirements and provisions. The undersigned bidder agrees to bound upon his execution of

the bid and subsequent award to him by the Department of Transportation in accordance with this proposal to provide the

necessary contract payment bond and contract performance bond within fourteen days after the written notice of award is

received by him. The undersigned Bidder further agrees to provide all necessary machinery, tools, labor, and other means

of construction; and to do all the work and to furnish all materials, except as otherwise noted, necessary to perform and

complete the said contract in accordance with the 2024 Standard Specifications for Roads and Structures by the dates(s)

specified in the Project Special Provisions and in accordance with the requirements of the Engineer, and at the unit or lump

sum prices, as the case may be, for the various items given on the sheets contained herein.

The Bidder shall provide and furnish all the materials, machinery, implements, appliances and tools, and perform the work

and required labor to construct and complete Contract No. DJ00581 in Stanly County, for the unit or lump sum prices, as

the case may be, bid by the Bidder in his bid and according to the proposal, plans, and specifications prepared by said

Department, which proposal, plans, and specifications show the details covering this project, and hereby become a part of

this contract.

The published volume entitled North Carolina Department of Transportation, Raleigh, Standard Specifications for Roads

and Structures, January 2024 with all amendments and supplements thereto, is by reference incorporated into and made

a part of this contract; that, except as herein modified, all the construction and work included in this contract is to be done

in accordance with the specifications contained in said volume, and amendments and supplements thereto, under the

direction of the Engineer.

If the proposal is accepted and the award is made, the contract is valid only when signed either by the Contract Officer or

such other person as may be designated by the Secretary to sign for the Department of Transportation. The conditions and

provisions herein cannot be changed except over the signature of the said Contract Officer or Division Engineer.

The quantities shown in the itemized proposal for the project are considered to be approximate only and are given as the

basis for comparison of bids. The Department of Transportation may increase or decrease the quantity of any item or portion

of the work as may be deemed necessary or expedient.

An increase or decrease in the quantity of an item will not be regarded as sufficient ground for an increase or decrease in the

unit prices, nor in the time allowed for the completion of the work, except as provided for the contract.

Accompanying this bid is a bid bond secured by a corporate surety, or certified check payable to the order of the Department

of Transportation, for five percent of the total bid price, which deposit is to be forfeited as liquidated damages in case this

bid is accepted and the Bidder shall fail to provide the required payment and performance bonds with the Department of

Transportation, under the condition of this proposal, within 14 calendar days after the written notice of award is received by

him, as provided in the Standard Specifications; otherwise said deposit will be returned to the Bidder.

DJ00581 R-2530BA

Stanly

COVER SHEET

PROPOSAL SHEET

TABLE OF CONTENTS

PROJECT SPECIAL PROVISIONS

BOND REQUIREMENTS: ........................................................................................................ G-1

CONTRACT TIME AND LIQUIDATED DAMAGES (No Permits): ..................................... G-1

INTERMEDIATE CONTRACT TIME NUMBER 1 AND LIQUIDATED DAMAGES: ....... G-2

NO MAJOR CONTRACT ITEMS:............................................................................................ G-5

NO SPECIALTY ITEMS: .......................................................................................................... G-5

FUEL AND ASPHALT PRICE ADJUSTMENT: ..................................................................... G-5

MINORITY BUSINESS ENTERPRISE AND WOMEN BUSINESS ENTERPRISE

(DIVISIONS):............................................................................................................................. G-5

BIDS OVER LIMIT: ................................................................................................................ G-20

USE OF UNMANNED AIRCRAFT SYSTEM (UAS): .......................................................... G-20

EQUIPMENT IDLING GUIDELINES:................................................................................... G-21

TWELVE MONTH GUARANTEE: ........................................................................................ G-22

OUTSOURCING OUTSIDE THE USA: ................................................................................. G-22

ROADWAY .................................................................................................................................R-1

STANDARD SPECIAL PROVISIONS

AVAILABILITY OF FUNDS – TERMINATION OF CONTRACTS ..................................SSP-1

ERRATA..................................................................................................................................SSP-2

PLANT AND PEST QUARANTINES ...................................................................................SSP-4

MINIMUM WAGES ...............................................................................................................SSP-5

TITLE VI AND NONDISCRIMINATION: ...........................................................................SSP-6

ON-THE-JOB TRAINING ....................................................................................................SSP-15

PROPOSAL ITEM SHEET

ITEM SHEET(S)

DJ00581 R-2530BA

Stanly

INSTRUCTIONS TO BIDDERS

PLEASE READ ALL INSTRUCTIONS CAREFULLY

BEFORE PREPARING AND SUBMITTING YOUR BID.

All bids shall be prepared and submitted in accordance with the following requirements.

Failure to comply with any requirement may cause the bid to be considered irregular and

may be grounds for rejection of the bid.

For preparing and submitting the bid electronically, refer to Article 102-8(B) of the Standard

Specifications.

Bidders that bid electronically on Raleigh Central-Let projects will need a separate Digital

Signature from the approved electronic bidding provider for Division Contracts.

ELECTRONIC ON-LINE BID:

1. Download entire proposal from Connect NCDOT website. Download the electronic submittal

file from the approved electronic bidding provider website.

2. In accordance with Article 102-3 of the Standard Specifications, registration on the Interested

Parties List is required unless SP1 G02 Interested Parties List Not Required provision is

included in the proposal.

3. Prepare and submit the electronic submittal file using the approved electronic bidding provider

software.

4. Electronic bidding software necessary for electronic bid preparation may be downloaded from

the

Bid

Express

website

following

the

directions

at:

https://connect.ncdot.gov/letting/Pages/Electronic-Bidding.aspx.

5. Questions should be emailed 7 calendar days prior to the bid opening to Jason Brooks at

jcbrooks@ncdot.gov. Contact with any other NCDOT personnel concerning this project is

strictly prohibited, unless otherwise noted, and may result in bids being considered non-

responsive.

DJ00581 R-2530BA

G-1

Stanly

PROJECT SPECIAL PROVISIONS

GENERAL

All work and materials shall be in accordance with the provisions of the General Guidelines of

this contract, the Project Special Provisions, the North Carolina Department of Transportation

2024 Standard Specifications for Roads and Structure, the North Carolina Department of

Transportation 2024 Roadway Standards Drawings, the current edition of the Manual on

Uniform Traffic Control Devices (MUTCD).

The Contractor shall keep himself/herself fully informed of all Federal, State and local laws,

ordinances, and regulations, and shall comply with the provisions of Section 107 of the Standard

Specifications.

BOND REQUIREMENTS:

(6-1-16)(Rev.1-16-24)

102-8, 102-10

SPD 01-420A

A Bid Bond is required in accordance with Article 102-10 of the Standard Specifications for Roads

and Structures.

Contract Payment and Performance Bonds are required in accordance with Article 103-7 of the

Standard Specifications.

CONTRACT TIME AND LIQUIDATED DAMAGES (No Permits):

(7-1-95) (Rev. 5-16-23)

108

SP1 G07 B

The date of availability for this contract is the date the Contractor begins work but not before

February 2, 2026 or later than March 30, 2026.

The completion date for this contract is the date that is Seventy (70) consecutive calendar days

after and including the date of availability.

Except where otherwise provided by the contract, observation periods required by the contract will

not be a part of the work to be completed by the completion date and/or intermediate contract times

stated in the contract. The acceptable completion of the observation periods that extend beyond

the final completion date shall be a part of the work covered by the performance and payment

bonds.

The liquidated damages for this contract are Six Hundred Dollars ($ 600.00) per calendar day.

At the preconstruction conference the Contractor shall declare his expected date for beginning

work. Should the Contractor desire to revise this date after the preconstruction conference, he

shall notify the Engineer in writing at least thirty (30) days prior to the revised date.

This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.

Milled Rumble Strips along NC 24/27 from Sweet Home Church Rd. to the Pee Dee River Bridge in Stanly County

Attachment Preview

See also