| Location: | Virginia |
|---|---|
| Posted: | May 19, 2026 |
| Due: | May 29, 2026 |
| Agency: | HOMELAND SECURITY, DEPARTMENT OF |
| Type of Government: | Federal |
| Category: |
|
| Solicitation No: | 52000QR260024183 |
| Publication URL: | To access bid details, please log in. |
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
USCGC Escanaba 28VDC Rectifier
Solicitation Amendment #2
*The new closing date for this reopening is Friday, May 29th, 2026, 1600PM EST *
The purpose of this amendment is to reopen combined synopsis/solicitation NR 52000QR260024183 for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, and as supplemented with additional information included in this notice to allow for full and open competition.
The original solicitation was issued as a 100% small business set-aside; however, the Government has determined that it is in its best interest to remove the set-aside restriction.
Although this requirement is solicited under full and open competition, the Government reserves the right to issue the award as a small business set-aside if advantageous and in accordance with FAR 19.502-2.
The Government has:
*Changed the solicitation from 100% small business set-aside to full and open competition (unrestricted)
*Extended the submission deadline to Friday, May 29th, 2026, 1600PM EST
*All other terms and conditions of the original solicitation and previous solicitation amendments remain unchanged
Instructions to Offerors:
To allow for the submission of new or revised quotations, the Government is providing additional time; however, vendors who have previously submitted a quote do not need to resubmit to remain under consideration, as original proposals will be deemed final, binding, and evaluated as-is unless a revised submission is received by the closing window. It remains the sole responsibility of the interested party to monitor the solicitation for all modifications. The new closing date for this solicitation is Friday, May 29th, 2026, 1600PM EST. Proposals must be received by this deadline to be considered.
Solicitation Amendment #1
This is a modification to combined synopsis/solicitation 52000RFQ260024183 for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, and as supplemented with additional information included in this notice.
The purpose of this modification is to incorporate and distribute the Government's responses to questions submitted by interested parties regarding the solicitation requirements. This ensures all potential offerors have access to the same clarifying information prior to submitting their proposals.
The Government has:
Provided responses to vendor Questions (Q&A)
Extended the solicitation closing window.
To ensure all offerors have a clear understanding of the technical and administrative requirements, the Government is providing the following responses to questions received during the open solicitation period:
Question 1: Is there a specific manufacturer or model number currently installed that the USCG prefers for this replacement?
Government Response 1: Part Number: 137-01B
Question 2: Beyond the 28VDC output, are there specific amperage requirements or physical dimension constraints we should account for in our cost breakdown?
Government Response 2:
INPUT SPECIFICATIONS
Voltage 440 VAC, 3 phase, 3 wire, 60 Hz
Current Nominal 18 A – Maximum 30 A Full Load Output
OUTPUT SPECIFICATIONS
Applicable standards MIL-P-15736/1D
Output voltage 26 to 32 VDC adjustable
Line drop compensated for up to 3.5V cable drop with 1000A output
current
Voltage regulation +/-2%
Rated output current 300A
Short-term output current 1000A for 1 sec
750A for 4 sec
500A for 15 sec
350A for 30 sec
(Four consecutive cycles repeatable with 5 minute rest time)
Short circuit capacity 1100A for 2 seconds
Ripple and noise 2Vpp
Efficiency at rated load 80%
Parallel operation Up to 3 units can be paralleled to provide up to 1000A continuous
output.
Instructions to Offerors:
All other terms and conditions of the original solicitation remain unchanged.
If a previous proposal was submitted by the first closing window and no response or revised proposal is received from the bidder on this amendment, the original proposal will be deemed final and binding and evaluated as-is. It is the sole responsibility of the interested party to monitor the solicitation for all modifications.
The new closing date for this solicitation is Thursday, April 23rd, 2026, 10:00 AM EST. Proposals must be received by this deadline to be considered.
CGC ESCANABA 28VDC RECTIFIER
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information in this notice. This solicitation is issued as a Request for Quote Number 52000QR260024183. This procurement will be processed in accordance with FAR Part 12.
The North American Industry Classification System (NAICS) is 336611. The small business size standard is 1300. This is a total small business set aside all responsible small business sources may submit proposals that will be considered. This synopsis/solicitation is issued pursuant to FAR 13.106-1(b), and the resultant purchase order will be awarded on a firm-fixed price basis using simplified acquisition procedures in accordance with FAR 13.
THE UNITED STATED COAST GUARD SURFACE FORCE LOGISTICS CENTER REQUEST THE CONTRACTORS TO PROVIDE PRICING FOR THE FOLLOWING REQUIREMENT:
The contractor shall provide CGC ESCANABA 28VDC RECTIFIER.
A. REQUIREMENT:
1. 28VDC RECTIFIER. See Attached SOW.
2. Location of Delivery
CGC ESCANABA
4000 Coast Guard Blvd
Portsmouth, VA 23703
3. EXPECTED DELIVERY DATE: 09/03/2026-12/03/2026
Interested Vendors shall provide product/service details, Product Data Sheet, and cost breakdown IAW SOW for technical review. Vendors shall provide a detailed cost breakdown to include all the specifications to be reviewed by a technical rep.
NOTE: The USCG/Government reserves the right to Award on an All or None Basis, i.e., the Government may issue a Purchase Order (PO) to the offeror that submits the lowest aggregate price, rather than issue a PO to each offeror based on the lowest quotation on each item.
As stated below, the provision at FAR 52.212-2- Evaluation-Commercial Items-applies with the following addenda:
Award of a contract will be based on the following criteria: The purchase order will be awarded as a firm-fixed price contract using simplified acquisition procedures in accordance with FAR Part 13.5.
1. Please provide any warranty information.
2. Vendors MUST be registered in www.sam.gov
The USCG/Government intends to award a purchase order resulting from this synopsis/solicitation to the responsible contractor whose quote conforms to the solicitation and is most advantageous and the best value to the Government, price and other factors considered.
Please Note: Interested Offerors having the expertise as required are invited to submit a Firm Fixed Price quotation that will be considered by the agency. Quotations must be submitted on company letterhead stationery and must include the following information:
(1) Cost Breakdown
(2) Unit Cost
(3) Extended Price
(4) Total Price
(5) Payment Terms
(6) Discount offered for prompt payment
(7) Company Unique Entity ID (UEI) and Cage Code.
Quotes must be received no later than 23 April 2026 at 10:00 A.M. Eastern Standard Time. Email quotes are acceptable and shall be sent to Mr. Cornelius Claiborne at: Cornelius.N.Claiborne@uscg.mil and carbon copy Contracting Officer, SKC Karla Balint at karla.p.balint@uscg.mil.
Any questions or concerns regarding any aspect of the RFQ must be forwarded to Mr. Cornelius Claiborne at email address – Cornelius.N.Claiborne@uscg.mil and carbon copy Contracting Officer, SKC Karla Balint via email Karla.p.balint@uscg.mil
The following FAR Clauses and Provisions apply to this acquisition:
The following clauses, and others as directed by the Contracting Officer as applicable, shall apply to this awarded contract:
NOTE: In addition to the listed clauses, please review the attached FAR Clause Matrix for all clauses applicable to this requirement.
*The above/following clauses are incorporated by reference, entire clause(s) available at https://acquisition.gov.
NOTICE TO OFFERORS CONCERNING REPRESENTATIONS AND CERTIFICATIONS:
This solicitation contains FAR Clause 52.204-7, System for Award Management and FAR Provision 52.204-8, Annual Representations and Certifications. In accordance with FAR 4.1201 (a), prospective contractors shall complete electronic annual representations and certifications via SAM accessed through https://www.sam.gov. Please ensure completion prior to submitting a quote. Paragraph (b) of FAR 52.204-8 applies.
System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations. Examples include 52.222-25, Affirmative Action Compliance, and paragraph (d) of 52.212-3, Offeror Representations and Certifications—Commercial Products and Commercial Services. Additional examples include 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services, and 52.213-4, Terms and Conditions—Simplified Acquisitions (Other Than Commercial Products and Commercial Services).
| Apr 11, 2026 | [Combined Synopsis/Solicitation (Original)] 52000QR260024183- CGC Escanaba 28VDC Rectifier |
| Apr 19, 2026 | [Combined Synopsis/Solicitation (Updated)] 52000QR260024183- CGC Escanaba 28VDC Rectifier |

With GovernmentContracts, you can:
...Set aside used Product Service Code: J066 - MAINT/REPAIR/REBUILD OF EQUIPMENT- INSTRUMENTS AND... ...
JUSTICE, DEPARTMENT OF
Bid Due: 6/10/2026
...Initiative: None Classification Original Set Aside: Product Service Code: J020 - MAINT/REPAIR/REBUILD OF...
DEPT OF DEFENSE
Bid Due: 6/17/2026
...used Product Service Code: J039 - MAINT/REPAIR/REBUILD OF EQUIPMENT- MATERIALS HANDLING EQUIPMENT... Product ...
DEPT OF DEFENSE
Bid Due: 6/15/2026
...Code: J038 - MAINT/REPAIR/REBUILD OF EQUIPMENT- CONSTRUCTION/MINING/EXCAVATING/HIGHWAY MAINTENANCE...
DEPT OF DEFENSE
Bid Due: 6/08/2026