Picnic Tables and Benches

Dumor Model 71 Series Item# 71-60PLC 6-foot Picnic Table, CDR PL, cedar planks and black frame - OR APPROVED EQUAL- Table dimensions: Overall: 71 long x 58 7/8 deep x 30 high Table and seat supports shall be 1 1/4 (1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 (1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats. Anchoring: Stainless steel expansion anchors (1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8-stage iron phosphorous wash system. Parts are coated with a zinc-rich epoxy primer to an AVERAGE of 4-5 mils. Parts are then finished with a top-coat of TGIC-polyester powder to an AVERAGE of 4-5 mils. *Delivery only- installation is not needed. *Shipping is to be included in bid offer* Shipping address: Kentucky Department of Highways District 1 - Paducah District Office 5501 Ky Dam Road Paducah, Ky. 42003

Dumor Model 71 Series Item# 71-68-1PLC WHLCHR Picnic Table, CDR PL, cedar planks and black frame. - OR APPROVED EQUAL- Table dimensions: (ADA accessible table) Overall: 71 long x 58 7/8 deep x 30 high Table and seat supports shall be 1 1/4 (1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 (1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats. Anchoring: Stainless steel expansion anchors (1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8-stage iron phosphorous wash system. Parts are coated with a zinc-rich epoxy primer to an AVERAGE of 4-5 mils. Parts are then finished with a top-coat of TGIC-polyester powder to an AVERAGE of 4-5 mils. *Delivery only- installation is not needed. *Shipping is to be included in bid offer* Shipping address: Kentucky Department of Highways District 1 - Paducah District Office 5501 Ky Dam Road Paducah, Ky. 42003

Dumor Model Series Item# 71-80PLC 8-foot Picnic Table, CDR PL, cedar planks and black frame - OR APPROVED EQUAL - Table dimensions: Overall: 95 long x 58 7/8 deep x 30 high. Table and seat supports shall be 1 1/4 (1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 (1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats. Anchoring: Stainless steel expansion anchors (1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8-stage iron phosphorous wash system. Parts are coated with a zinc-rich epoxy primer to an AVERAGE of 4-5 mils. Parts are then finished with a top-coat of TGIC-polyester powder to an AVERAGE of 4-5 mils. *Delivery only- installation is not needed. *Shipping to be included in bid offer* Shipping address: Kentucky Department of Highways District 7 Roadside Maintenance Storage Facility 2151 Frankfort Court Lexington, Ky. 40511

Dumor Model Series Item# 443-82/S-2, STL Picnic Table, Plates. - OR APPROVED EQUAL- Table Dimensions: Overall: 98 1/4 long x 83 3/4 deep x 30 high. Supports: Bench end supports shall be ASTM A48 Class 30 cast iron. Table supports shall be manufactured from 1 x 2 ASTM A36 steel flat bar. Seat Assembly: Seat straps shall be manufactured from 1/4 x 1 1/2 ASTM A36 carbon steel flat bar. Support pipes shall be manufactured from 2 (2 3/8 OD)ASTM A513 schedule 40 steel tubing. Pipe brace shall be manufactured from 3/4 (1 1/16 OD) ASTM A500 schedule 40 steel tubing. Table Assembly: Table straps shall be manufactured from 1/4 x 1 1/2 ASTM A36 carbon steel flat bar. Support pipes shall be manufactured from 2 (2 3/8 OD)ASTM A513 schedule 40 steel tubing. Pipe brace shall be manufactured from 3/4 (1 1/16 OD) ASTM A500 schedule 40 steel tubing. Anchoring: Stainless steel expansion anchors (1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8-stage iron phosphorous wash system. Parts are coated with a zinc-rich epoxy primer to an AVERAGE of 4-5 mils. Parts are then finished with a top-coat of TGIC-polyester powder to an AVERAGE of 4-5 mils. *Delivery only- installation is not needed. *Shipping to be included in bid offer* Shipping Address: Kentucky Department of Highways District 11 Roadside Maintenance Storage Facility Two Miles North of Manchester on US 421 Manchester, Ky. 40962

Dumor Model Series Item# 0-71-80PLC-01, 2x10x95 Slat, CDR PL, cedar planks only - OR APPROVED EQUAL- 2 x 10 x 95 nominal HDPE recycled plastic slats, color cedar. *Shipping to be included in bid offer* Shipping address: Kentucky Department of Highways Division of Maintenance 200 Mero Street Frankfort, Ky. 40622

Dumor Model 119 Series Item# 119-80, 8-foot Cast Bench, STL Seat, 2 Arms, Color Black -OR APPROVED EQUAL- Bench dimensions: Overall: 100 1/4 long x 28 1/16 deep x 32 11/16 high. Supports: End Supports shall be ASTM A48 Class 30 cast iron. Seat Assembly: Seat straps shall be manufactured from 1/4 x 1 1/2 ASTM A36 carbon steel flat bar. Support pipes shall be manufactured from 2 (2 3/8 OD)ASTM A513 schedule 40 steel tubing. Pipe braces shall be manufactured from 3/4 (1 1/16 OD) ASTM A500 schedule 40 steel tubing. Anchoring: Stainless steel expansion anchors (1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8-stage iron phosphorous wash system. Parts are coated with a zinc-rich epoxy primer to an AVERAGE of 4-5 mils. Parts are then finished with a top-coat of TGIC-polyester powder to an AVERAGE of 4-5 mils. *Delivery only- installation is not needed. *Shipping to be included in bid offer* Shipping address: Kentucky Department of Highways District 3 Roadside Maintenance Storage Facility 2160 Three Springs Road Bowling Green, Ky. 42101

Dumor Model Series K-71 PL 71 Series PL Hardware Kit - OR APPROVED EQUAL- Hardware Kit *Shipping to be included in bid offer* Shipping address: Kentucky Department of Highways Division of Maintenance 200 Mero Street Frankfort, Ky. 40622

Dumor Model Series Item# 71-80PLC 8-foot Picnic Table, CDR PL, cedar planks and black frame - OR APPROVED EQUAL- Table dimensions: Overall: 95 long x 58 7/8 deep x 30 high. Table and seat supports shall be 1 1/4 (1 5/8 OD) ASTM A513 schedule 40 steel tubing and 1 1/2 x 2 x 1/8 ASTM A36 steel angle. Table top assembly shall be manufactured from 1 (1 5/16 OD) ASTM A500 schedule 40 steel tubing, 3/16 thick ASTM A36 steel plate and 2 x 10 nominal HDPE recycled plastic slats. Anchoring: Stainless steel expansion anchors (1/2 x 3 3/4) provided. Powder Coating Finish: All parts are processed through an 8-stage iron phosphorous wash system. Parts are coated with a zinc-rich epoxy primer to an AVERAGE of 4-5 mils. Parts are then finished with a top-coat of TGIC-polyester powder to an AVERAGE of 4-5 mils. *Delivery only- installation is not needed. *Shipping to be included in bid offer* Shipping address: Kentucky Department of Highways District 2 Roadside Maintenance Storage Facility 1840 North Main Street Madisonville, Ky. 42431