Bridge to Culvert Conversion

To remove existing bridge and haul material away. Replace with 4 – 10’ x 80’ galvanized culverts and couplers. The contractor will be responsible for prepping the site and digging a hole large enough for the installation of the culverts. The first foot of the culverts must be hand packed to avoid any occurrence of movement. Culverts also to be wrapped with Geotech cloth. Rip rap to be put down the channel approximately 100’. All material needed for the project will be provided by the municipality. Material to be supplied by the municipality rip rap, gravel/sand, Geotech cloth and culverts.