MP200 Emergency Power Equipment Replacement

Location:	California
Posted:	Oct 15, 2025
Due:	Nov 18, 2025
Agency:	UCLA Capital Programs
Type of Government:	State & Local
Category:	61 - Electric Wire, and Power and Distribution Equipment J - Maintenance, Repair, and Rebuilding of Equipment
Solicitation No:	906020.01
Publication URL:	To access bid details, please log in.

Project Name	MP200 Emergency Power Equipment Replacement
Project Number	906020.01
Project Description	Subject to conditions prescribed by the University of California, Los Angeles, sealed bids for a CM at Risk contract are invited from prequalified CM/Contractors for the following work: This project will replace the obsolete emergency power system at 200 Medical Plaza (MP200), also known as the Peter Morton Medical Building. The project will include the removal, decommissioning, and replacement of two existing 1000 kW emergency diesel generators along with their associated controls. The existing load banks will also be removed and replaced with new resistive load banks sized to match the new generator capacity. To support the new equipment, the existing day fuel tank will be decommissioned and replaced, and the diesel exhaust treatment system will be upgraded to comply with current South Coast Air Quality Management District (SCAQMD) requirements. In addition, seven Automatic Transfer Switches (ATS), the paralleling switchgear, and all associated conductors currently distributed throughout the building will be removed and replaced in their entirety. A new equipment platform will be constructed to support the generators, while temporary cabling routed into the B-level central plant and roof-level electrical room will be properly weatherproofed and fireproofed. The scope also includes modifications to the existing roof structure to accommodate new loads. This will require removal and replacement of the roof membrane, insulation, substrate, drains, and waterproofing in all areas affected by the work. An expansion of the existing roof opening will be carried out, including the installation of new structural framing to support a new roof hatch and ladder. Structural strengthening will be incorporated as required, along with new roof curbs for the equipment. Finally, the project will address the restoration of interior components impacted by construction, such as fire sprinkler systems, HVAC components, ceiling finishes, wall and ceiling repairs, and painting. Ancillary components necessary for a complete, fully operational, and code-compliant system including new breakers for the paralleling switchgear, will also be replaced as part of the work. The abatement of Hazardous Materials is required. The CM/Contractor shall furnish all equipment listed in Exhibit 33, or equal. Bidders shall bid the cost to furnish all equipment listed in Exhibit 33 in the space provided on the Bid Form. Furnishing of listed equipment includes, but is not limited to, furnishing, insuring, ordering, receiving, storing, protecting and delivering all CM/Contractor Furnished Equipment identified in the Contract Documents. The installation of the equipment will be bid in Bid Packages. TO VIEW AND DOWNLOAD ALL FURTHER INFORMATION (BIDDING DOCUMENTS; ADDENDA IF ANY; CONFERENCE/JOB WALK SIGN-IN SHEET; PLANHOLDERS LIST; PREQUALIFIED BIDDERS LIST, ETC.), CLICK HERE: UCLA ONLINE PLANROOM
Estimated Construction Cost	$14,889,264.00

	943984.01

MP200 Emergency Power Equipment Replacement

See also