| Location: | California |
|---|---|
| Posted: | Oct 27, 2026 |
| Due: | Nov 5, 2026 |
| Agency: | AGRICULTURE, DEPARTMENT OF |
| Type of Government: | Federal |
| Category: |
|
| Solicitation No: | 1240LP27SS0001 |
| Publication URL: | To access bid details, please log in. |
APEX Accelerators are an official government contracting resource for small businesses. Find your local APEX Accelerator (opens in new window) for free government expertise related to contract opportunities.
APEX Accelerators are funded in part through a cooperative agreement with the Department of Defense.
The APEX Accelerators program was formerly known as the Procurement Technical Assistance Program (opens in new window) (PTAP).
REQUEST FOR INFORMATION (RFI)
Subject: Market Research – Custom Outdoor-Rated Equipment Enclosures
Agency: U.S. Forest Service
Type: Sources Sought / Request for Information (RFI)
Purpose: This RFI is issued solely for information and planning purposes. This is not a solicitation and does not commit the Government to any future acquisition.
1. INTRODUCTION
The U.S. Forest Service is conducting market research to identify capable vendors able to design, manufacture, and deliver custom outdoor-rated steel enclosures for electronic display equipment. The Government seeks industry input regarding capability, production lead times, materials, standards compliance, and potential manufacturing considerations.
2. BACKGROUND
The Forest Service requires 45 custom enclosures designed to house a six-character outdoor digital display unit. These enclosures must protect the device from weather, impact, and environmental exposure while providing specific mounting and sun‑shade functionality. All requirements are functional and performance‑based; no proprietary industrial design elements are required or included.
3. OBJECTIVE OF THIS RFI
The Government seeks industry feedback on:
• Capability to manufacture enclosures meeting the dimensional, material, and performance requirements listed below.
• Potential challenges, recommended alternatives, or suggestions to improve manufacturability or durability.
• Estimated pricing ranges for planning purposes (not binding).
• Estimated production and delivery timelines.
• Identification of any commercially available products that meet or could be modified to meet the requirements.
4. FUNCTIONAL REQUIREMENTS (SUMMARY)
Vendors responding to this RFI should describe their ability to meet the following performance‑based requirements:
4.1 Enclosure Function
• Outdoor‑rated steel enclosure similar in function to an industrial wireway or gutter box.
• Must accommodate a display unit measuring approximately 11″H × 33″L × 4″D.
• Provide weather resistance and structural protection in an outdoor environment.
4.2 Approximate Enclosure Dimensions
• Exterior dimensions around 14″H × 36″L × 12″D.
4.3 Construction Requirements
• Material equivalent to 14‑gauge steel, painted interior and exterior.
• Environmental rating equivalent to NEMA Type 4 or 12.
• Fully sealed to prevent water and weather intrusion.
4.4 Mounting Features
• Two rear mounting feet, each with two mounting holes.
• Mounting hole spacing approximately 34 inches center‑to‑center.
4.5 Cover Design and Sun‑Shade Functionality
• Removable front cover that can be mechanically secured on top of the enclosure to act as a sunshade.
• Shade cover must remain stable in typical outdoor wind conditions.
• Features such as studs, collars, clamps, or similar mechanical retention systems are acceptable—vendors may propose alternatives.
4.6 Interior Mounting Panel
• Removable panel suitable for mounting the customer‑provided electronic display.
5. VENDOR RESPONSE REQUESTED
Interested vendors are invited to submit the following information:
6. RESPONSE INSTRUCTIONS
Responses should be submitted electronically in PDF or Word format.
This RFI is solely for market research; submission does not guarantee future solicitation or contract award.
7. DISCLAIMER
This RFI does not constitute a solicitation and shall not be construed as a commitment by the Government. All information received is strictly voluntary and will be used for planning purposes only.
VENDOR RESPONSE FORM
Request for Information (RFI): Custom Outdoor-Rated Equipment Enclosures
Section 1 – Vendor Information
Section 2 – Capability Statement
Section 3 – Technical Feedback
Section 4 – Estimated Pricing (ROM – Non‑Binding)
Provide an estimated cost range for manufacturing a quantity of 45 enclosures.
• Unit Price Estimate: ___________________________________________
• Total Estimate: _______________________________________________
Section 5 – Production Lead Time
Please provide estimated timelines for:
• Prototype or sample unit (if applicable): ________________________
• Full production: ______________________________________________
• Delivery of all units: __________________________________________
Section 6 – Additional Information
Include any product brochures, enclosure photos, technical drawings, or configuration options related to similar enclosures your company provides.
Section 7 – Certification
I certify that the information provided in this response is accurate to the best of my knowledge.
Name: ___________________________ Title: _______________________
Signature (if applicable): _____________________ Date: ___________

With GovernmentContracts, you can:
Follow UPDATE Request for Bids for Food Trucks at Rodeo Beach within Golden
INTERIOR, DEPARTMENT OF THE
Bid Due: 12/31/2026
GFO-26-302 - Food Production Investment Program 2026 Solicitation Type Grant Funding Opportunity Solicitation
California Energy Commission
Bid Due: 12/17/2026
Opportunity ID 224081 Organization City of Los Angeles Department Transportation Stage Open Contact
City of Los Angeles
Bid Due: 12/10/2026
Project ID: Title: 2026 Sewer Rehabilitation Project Addenda: 0 Release Date: 9/17/2026 Due
City of American Canyon
Bid Due: 1/12/2027