STATEMENT OF WORK
INDUSTRIAL SEWING MACHINES, PARTS AND SUPPLIES
INVITATION TO QUALIFY (ITQ) CONTRACT
OVERVIEW: The purpose of the Sewing Machines, Parts and Supplies ITQ is to qualify responsible and
responsive Contractors to provide Industrial Sewing Machines, Parts and Supplies to the PA Department
of Corrections, Bureau of Correctional Industries Garment and Laundry Plants located throughout the
Commonwealth of Pennsylvania.
ISSUING OFFICE: This ITQ is managed and administered by the Commonwealth of Pennsylvania,
Department of Corrections (DOC), Bureau of Administration. All inquiries should be referred to:
Susan Duff
PA Department of Corrections
Bureau of Administration
1920 Technology Parkway
Mechanicsburg, PA 17055
Telephone: 717-728-4753
Email: sduff@pa.gov
TERM OF CONTRACT: The term of the Contract shall begin on the Commencement Date (as defined
below) and shall end on the Expiration Date identified in the Contract, subject to the other provisions of
the Contract.
QUALIFICATIONS: Suppliers interested in becoming an ITQ Supplier must meet the following
requirements. Failure to meet the below requirements will result in the application being rejected.
Each Supplier that meets the minimum qualifications will be awarded a contract. Award of a contract to
a Supplier is not a guarantee of business.
A. Supplier must provide a link to a list of their available products, and a percentage discount
for each commodity code to be offered to the DOC.
B. Supplier must provide a listing of manufacturers whose products they offer. Supplier must
upload documentation that they are the manufacturer of the products being offered or an
authorized representative (dealer/reseller) of the manufacturer’s products. If not the
manufacturer of the products being offered, the Supplier must upload a document, on the
manufacturer’s letterhead, stating dealer/reseller is allowed to sell the manufactured product.
Suppliers are required to submit documentation if they begin representing additional
manufacturers after the contract is executed, or if they cease representing a manufacturer
indicated in their original submission.
C. Supplier must provide documentation showing five (5) years’ experience supplying sewing
related equipment and supplies.
D. Suppliers must be able to provide machines and parts to DOC locations across the
Commonwealth, including but not limited to:
SCI-Waymart, Route #6, Waymart PA 18472
SCI-Dallas, 1000 Follies Road, Dallas PA 18612
SCI-Frackville, 1111 Altamont Blvd, Frackville PA 17931
SCI-Phoenix, 1200 Mokychic Drive, Collegeville PA 19426
SCI-Benner Township, 301 Institution Drive, Bellefonte PA 16823
SCI-Muncy, 6454 State Route 405, Muncy PA 17756
SCI-Huntingdon, 1100 Pike Street, Huntingdon PA 16654
SCI-Somerset, 1590 Walters Mill Road, Somerset PA 15510
SCI-Greene, 169 Progress Drive, Waynesburg PA 15370
SCI-Mercer, 801 Butler Pike, Mercer PA 16137
E. The prices are the delivered price to any Purchasing Entity. All deliveries shall be F.O.B.
destination, freight pre-paid, with all transportation and handling charges paid by the
Contractor.
EXCLUSIONS: This contract will only cover industrial sewing machines, parts and supplies listed in a
suppliers’ catalog.
MATERIAL CATEGORIES: Suppliers will need to choose the appropriate commodity code(s) to qualify for
this contract. Supplier will select he appropriate code(s) under the Business Details section of the
qualification process. The Commonwealth may add additional commodity codes as the need arises. The
table below lists the appropriate commodity code and description of each material category.
COMMODITY CODE
Industrial Sewing Machines
Sewing Machine Parts
Sewing Machine
Consumables
Garment Production
Materials
DESCRIPTION OF MATERIAL CATEGORY
Sewing machines specifically built for long term, professional sewing
projects.
Industrial sewing machine components, including but not limited to:
springs, screws, needle clamps, belts, pulleys, and brackets.
Industrial sewing machine parts which require periodic replacement,
including but not limited to needles.
Materials, items used in the production of garments including but not
limited to: feed rails for cutting tables, automatic trimmers, cloth drills,
scissors, nips.
GENERAL INFORMATION/REQUIREMENTS:
A. Warranty. Each sewing machine provided shall be warranted for a minimum of one (1) year
from date of delivery or issuance to be free from all defects in material and workmanship.
B. New Equipment. Unless otherwise specified in this ITQ, all products offered by Contractors
must be new and unused and constructed of the highest quality. A ‘new’ product is one that
will be used first by the Commonwealth after it is manufactured or produced. This clause
shall not be construed to prohibit Contractors from offering products with recycled content,
provided the product is new.
C. Type of Contract. Upon determination that the Supplier meets the ITQ requirements, the
Commonwealth will issue a contract to the Supplier. Upon receipt of a Purchase Order (PO)
issued under this Contract, the Supplier agrees to furnish the requested services to the
Commonwealth agency issuing the PO.
D. Order of Precedence. If any conflicts or discrepancies should arise in the terms and
conditions of this Contract, or the interpretation thereof, the order of precedence shall be:
i. This Contract;
ii. The data resident on the ITQ web site (DGS ITQ site) and incorporated herein by
reference at the date of execution of the Contract or issuance of an RFQ off this
Contract, whichever is later, including but not limited to the promises and certifications
the Supplier made in qualifying for the Contract;
If any conflicts or discrepancies should arise in the interpretation of a PO, the order of
precedence shall be:
i. The consulting service category definitions, descriptions, qualification requirements,
and contract terms and conditions set forth in the RFQ;
ii. This Contract;
iii. the PO and any attachment thereto, including: (1) the Supplier’s Proposal, as
accepted by the Commonwealth; (2) the RFQ.
E. Bid Protest Procedure (April 2016). The Bid Protest Procedure is on the DGS website Bid
Protests.
REQUEST FOR QUOTES (RFQ) PROCEDURES: Commonwealth agencies will issue an RFQ to qualified
Suppliers, through the Commonwealth’s Custom Portal, powered by the JAGGAER system. Suppliers will
respond to the RFQ in the system. The requesting agency may require the qualified Supplier to furnish,
upon request, additional documentation in the RFQ. The qualified suppliers selected for the RFQ
process will receive a Purchase Order (PO) and will supply the service to meet the specific requirements
as indicated in the RFQ.
Agencies will exercise a scoring method based upon the criteria set forth in the RFQ. The Scoring
Methods are defined as follows:
• Best Value
o Refers to the process of selecting the quote which provides the greatest value to the
agency based on evaluating and comparing all pertinent criteria, including cost, so that
the Supplier whose overall proposal best suits the agency’s needs is selected for each
project; and
• Low Cost