RFQ 26-3159 Polypropylene Tanks – Coeur d’Alene
| Location: | Idaho |
|---|---|
| Posted: | Nov 18, 2025 |
| Due: | Dec 4, 2025 |
| Agency: | Idaho Department of Lands |
| Type of Government: | State & Local |
| Category: |
|
| Publication URL: | To access bid details, please log in. |
| Solicitation # and Title | Documents | Due Before |
| RFQ 26-3159 Polypropylene Tanks – Coeur d’Alene | 2:00:00 PM PT on December 4, 2025 |
Attachment Preview
STATE OF IDAHO
DEPARTMENT OF LANDS
POLYPROPYLENE TANKS – COEUR D’ALENE
REQUEST FOR QUOTE NO. 26-3159
DUE BEFORE 2:00:00 PM PT ON DECEMBER 4th, 2025
REQUEST FOR
QUOTE AND
INSTRUCTIONS
Quotes will be received by the Idaho Department of Lands for the following:
POLYPROPYLENE TANKS – COEUR D’ALENE
DELIVERY LOCATION:
Idaho Department of Lands
3328 W. Industrial Loop
Coeur D’Alene, ID 83815
INSTRUCTIONS
All price quotes must be entered on the attached Schedule A. The signed Schedule A must be submitted with your
response. No more than one award will be made. A vendor MUST provide a price for each respective line to be
considered for a purchase award. The submitting Vendor agrees that its Quotation shall be good and may not be
withdrawn for a period of ninety (90) days after the scheduled closing date, unless otherwise identified in the
Solicitation. No Quotation will be accepted if marked "price prevailing at time of delivery,” “estimated prices,”
“actual costs to be billed,” or similar phrases. After the date and time of closing, no price change will be allowed,
unless otherwise stated in the Solicitation. The right is reserved to accept a quote on each item separately, or as a
whole. IDL may award Purchase Order(s) in its best interest to the qualified Supplier submitting the lowest
responsible and responsive quote, either by line item or in whole. IDL shall award the Purchase Order to the qualified
Supplier submitting the lowest responsible and responsive quote.
o Note: Specifications for tanks have been stated in the Schedule A. THESE ARE EXACT PRODUCT
SPECIFICATIONS to ensure consistency in inventory/deployment. IDL reserves the right to rescind an
entire award if item deviates from the specification listed.
o Idaho Department of Lands reserves the right to enter negotiations in accordance with IDL Procurement
Policy #455.
QUOTES DEADLINE AND DELIVERY REQUIREMENTS
Quotes must be received, and time stamped by the Idaho Department of Lands at the electronic address listed below
before 2:00:00 PM PT. on December 4th, 2025. The Idaho Department of Lands is not responsible for delayed
delivery of electronically submitted quotes. The date and time of electronically received quotes, to the Idaho
Department of Lands email address listed below, will be used to determine if electronically submitted quotes were
received by the due date and time specified. Late Quotes will not be accepted. Mailed or Fax Quotes will not
be accepted.
Quote Email Address:
mrsande@idl.idaho.gov.
Emailed quotes are to be marked in the subject line with the following information: RFQ 26-3159 PolyPropylene Tanks
QUESTIONS
Questions pertaining to this RFQ must be submitted in writing by email to mrsande@idl.idaho.gov. The deadline for
receiving questions is 12:00 PM PT, on 11/25/2025. Responses to all questions received will be posted as an
addendum on the IDL website at www.idl.idaho.gov. Verbal questions will not be accepted.
RFQ 26-3159
2 of 5
POLYPROPYLENE TANKS
6&+('8/($
'DWH BBBBBBBBBBBBBBB
,16758&7,216
67$7(2),'$+2
'(3$570(172)/$1'6
5(48(67)254827(
7+,6,6127$125'(5
6ROLFLWDWLRQ1XPEHU
9HQGRUVPXVWXVHWKLVIRUPLQVXEPLWWLQJSULFHV
8QLWDQGWRWDOSULFHVPXVWEHIXOO\EXUGHQHGWRLQFOXGHGHOLYHU\WRWKHVWDWHGORFDWLRQ
48$1 81,7
$57,&/(6
*DOORQ3RO\SURS\OHQH7DQNIRU7\SH(QJLQHSHUIROORZLQJ
VSHFLILFDWLRQV VHHDWWDFKHG
(DFK )2%'HVWLQDWLRQ :,QGXVWULDO/RRS&RHXUG¶$OHQH,'
81,735,&( 727$/
35,&(
BBBBBBBBBBB
$FWLRQ
5HTXHVWIRU4XRWH5HVSRQVHV'XH%HIRUH
'HOLYHU\5HTXHVWHGE\
'XH'DWH
3724
16
'HOLYHU\UHTXHVWHGSHU
VSHFLILFDWLRQV
(0$,/4827(72
PUVDQGH#LGOLGDKRJRY
:HKDYHVWDWHGKHUHRQWKHSULFHVDWZKLFKZHZLOOIXUQLVKDQGDW
GHVWLQDWLRQQDPHGDERYHWKHDUWLFOHVRUVHUYLFHVDVVSHFLILHG
'HOLYHU\ZLOOEHPDGHDVVSHFLILHGDERYH
)LUPBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
6WUHHWBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
&LW\6WDWH=LS&RGHBBBBBBBB
3KRQH)D[BBBBBBBBBBBBBBBBBB
(0DLOBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
7D[SD\HU,'BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
6LJQHGE\BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
3ULQWHG1DPHBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
7LWOHBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
$OOSXUFKDVHRUGHUVUHODWHGWRWKLVVROLFLWDWLRQZLOOEHDZDUGHGLQ/80$
<RXPXVWEHUHJLVWHUHGLQ3D\PHQW:RUNV /80$WRUHFHLYHDSXUFKDVHRUGHU
RFQ 26-3159
3 of 5
POLYPROPYLENE TANKS
TANK SPECIFICATIONS
500 Gallon
Approximately-
• 76” Long
• 53” Wide
• 34” Tall
• 80” Overall Length
Tank Construction:
Tank to be constructed of polypropylene; baffled lengthways and crossways; top reinforced to
accommodate loads; top must be removable to allow for tank cleanout; flanges front and rear of
bottom outside of tank for mounting purposes. Flanges on top edges of tank for mounting a
spare tire and carrier. Anti-cavitation dome inside of tank at suction fitting to allow water in
tank to be drawn down to within one inch of bottom of tank.
Fittings:
Fittings must be of stainless-steel composition.
1. For suction side of pump, 2” NPT female. Location- center of fitting is 4 ½” from the
right side of the tank and 3” from the bottom.
2. For transducer, ¼” NPT female. Location- center of fitting 11 ¾” from the right side of
the tank and 3” from the bottom.
3. For discharge side of pump, 1 ½” NPT female. Location- center of fitting is 26 ¾” from
the right side of the tank and 3” from the bottom.
4. For foam tank, ¾” NPT female. Location- bottom right corner of foam tank to discharge
through rear of main tank.
Fill Spout:
Top of tank, as close the right rear corner as possible, minimum 6” with cap and removable
screen.
Tank Gauge:
Right rear corner of tank to be constructed of clear material for observing water level in tank.
Foam Tank:
Inside main tank at left rear, 10-gallon capacity, fill spout on top of tank, as close the left rear
corner as possible, 6” with cap.
Tank to fit in bed of service body with load space width of 54”
RFQ 26-3159
4 of 5
POLYPROPYLENE TANKS
RFQ 26-3159
5 of 5
POLYPROPYLENE TANKS
This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.
Daily notification on new contract opportunities
With GovernmentContracts, you can:
- Find more opportunities and win more business
- Receive daily alerts for all new bid opportunities
- Get contract opportunities matched to your business
* Disclaimer: Information regarding bids, requests for proposals (RFPs), or requests for qualifications (RFQs) is provided on this website only for convenience and does not constitute official public notice. Persons wishing to respond to or inquire about bids, RFPs, or RFQs should contact the appropriate government department.