LTC PROJECT CM25176001

CLIN 0001 5935009244386 CONNECTOR,PLUG,ELEC 17476 TELEDYNE INSTRUMENTS INC 1031001-125

CLIN 0002 5935010943674 CONNECTOR,PLUG,ELEC 17476 TELEDYNE INSTRUMENTS INC 1101001-101

CLIN 0003 5935013354863 CONNECTOR,RECEPTACL 17476 TELEDYNE INSTRUMENTS INC 1071017-114

CLIN 0004 5935013642845 CONNECTOR,PLUG,ELEC 17476 TELEDYNE INSTRUMENTS INC 1041001-101

17476 TELEDYNE INSTRUMENTS INC C04C1001G01

CLIN 0005 5935015147524 CONNECTOR,PLUG,ELEC 17476 TELEDYNE INSTRUMENTS INC 1150452-103

96169 ELECTRIC BOAT CORPORATION H671-2001-160

CLIN 0006 5340015484466 CAP,PROTECTIVE,DUST 17476 TELEDYNE INSTRUMENTS INC 1284034-101

CLIN 0007 5935015772292 INSERT,ELECTRICAL C 17476 TELEDYNE INSTRUMENTS INC 1122942-302

CLIN 0008 5935015789480 INSERT MOULDED ASSE 17476 TELEDYNE INSTRUMENTS INC 1122932-302

CLIN 0009 6020016431895 CABLE ASSEMBLY,FIBE 17476 TELEDYNE INSTRUMENTS INC 1535125-104

CLIN 0010 5935016651183 CONNECTOR,PLUG,ELEC 17476 TELEDYNE INSTRUMENTS INC 1381071-101

96169 ELECTRIC BOAT CORPORATION 218088513

96169 ELECTRIC BOAT CORPORATION H695-1101-248

CLIN 0011 4730016673259 CAP,RETENTION,PRESS 17476 TELEDYNE INSTRUMENTS INC 1014009-103

CLIN 0012 5935016792276 CONNECTOR,RECEPTACL 17476 TELEDYNE INSTRUMENTS INC 1125092-105

The AMC for CLIN 0005 and 0010: 1

AMC 1. Suitable for competitive acquisition for the second or subsequent time.

The AMC for CLIN 0001 – 0003, 0006 - 0009 and 0011 - 0012: 3

AMC 3. Acquire, for the second or subsequent time, directly from the actual manufacturer.

The AMSC for CLIN 0004 and 0005: C

AMSC C. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. If one source is approved, AMCs 3, 4, or 5 are valid. If at least two sources are approved or if data is adequate for an alternate source to qualify in accordance with the design control activity's procedures, AMCs 1 or 2 are valid.

The AMSC for CLIN 0001 – 0003, 0006 – 0009, 0011: D

AMSC D. The data needed to acquire this part competitively is not physically available, it cannot be obtained economically, nor is it possible to draft adequate specifications or any other adequate, economical description of the material for a competitive solicitation. AMCS 3, 4, or 5 are valid.

The AMSC for CLIN 0010 and 0012: R

AMSC R. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. This code is used when the Government did not initially purchase the data and/or rights. If only one source has the rights or data to manufacture this item, AMCs 3, 4, or 5 are valid. If two or more sources have the rights or data to manufacture this item, AMCs 1 or 2 are valid.

Primary Point of Contact:

Mindy M Cook,

Contract Specialist

Please review these NSNs listed above and provide any sources that may be able to manufacture these items. The approved sources for these NSNs are currently listed above. All information may be submitted directly to the Contract Specialist listed above. This information must be provided by the response date indicated above.

Should a company wish to be reviewed and qualified as an “Approved Source”, they must submit an application package through the DLA Land and Maritime Alternate Offer/Source Approval Request (SAR) Program. A SAR package contains all technical data needed to demonstrate that the prospective contractor can completely manufacture the item to the same level of quality or better than the Original Equipment Manufacturer (OEM). The onus is on the contractor to document and demonstrate their product is equal to, or better, than the currently approved item which DLA Land and Maritime is procuring.

For further information, please reference the DLA Land and Maritime webpage shown below for detailed explanation for the information and format necessary for a SAR and for the SAR approval process.

http://www.dla.mil/LandandMaritime/Business/Selling/Alternate-Offers/

See DIBBS DLAD PROC NOTE L04 Offers for Part Numbered Items and M06 Evaluation of Offers for Part Numbered Items.

This SOURCES SOUGHT notice is for informational and planning purposes only and shall not be construed as a solicitation or as an obligation or commitment by the Government. This notice is strictly for market research. This is NOT a solicitation for proposals, proposal abstracts, or quotations. The purpose of this notice is to be obtain information regarding the capability and availability of qualified businesses that are capable of executing this potential contract. The Government is not obligated and will not pay for any information received from potential sources as a result of this notice. Your response to the information requested will assist the Government in determining the appropriate acquisition method.

Sources interested in providing an offer on the solicitation, should complete the attached market survey and return the completed copy to Mindy Cook via email at mindy.cook@dla.mil.