USCGC HAMILTON FIRE PUMP REQUEST

Active

Contract Opportunity

COMBINED SYNOPSIS/SOLICITATION

This is a combined synopsis/solicitation for commercial items/services prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. Request for Quotations number is 70Z08525Q0029251 and is issued as a request for quotations (RFQ). This announcement constitutes the only solicitation; quotations are being requested, and a written solicitation will not be issued. This Request for Quotations incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-65 dated January 29, 2013. The NAICS Code is 336611. The small business size standard is 1250. This is a totally small business set aside. All responsible sources may submit proposals that will be considered by the agency. The contract will be awarded on a firm-fixed-price basis using simplified acquisition procedures in accordance with FAR Part 13.5. All responses from interested vendors must be received on/before 0800 Pacific Time, Augusth 21st, 2025 and will be reviewed by the Government.

The United States Coast Guard Surface Force Logistics Center has a requirement for the following:

The CTR shall provide parts requested for USCGC HAMILTON a fire Pump Purchase

CTR shall provide the following:

1. 
   
   
   
   1. nt. This work item describes the requirements for the Contractor to renew Fire Pump Assembly listed in Table 1.
   
   
   
   

table 1: Fire pump data

EQUIPMENT

model number/MANUFACTURER

Location

Fire Pump No. 5 Assembly

(51 Inch X 33 Inch X 27 Inch) Approximate Weight 2450 Lbs. (Figure 2 For Reference)

5 X 4 -10 / Carver Pumps Co.

Pump Room #2,

(5-70-01-E)

1.2 Government-furnished property.

MTI

ITEM DESCRIPTION

NSN/PN

QTY

ESTIMATED COST\($/UNIT)

Y

Fire Pump Assembly with Suction Assembly (5X4X10 Pump), Carver Pump Co. and 125 HP, 1760 RPM, 450 Volt AC, Three Phase, 60 Hz, Totally Enclosed Fan Cooled, Manufacturer Reliance Electric Co.

01-561-8775

1

$50,500.00

2. REFERENCES

Coast Guard Drawings

Coast Guard Drawing 418A-WMSL-100-001, Rev L, General Arrangements

Coast Guard Drawing 418A-WMSL-801-004, Rev B, Booklet of General Plans

Coast Guard Drawing 750-WMSL-101-027, Rev -, Equipment Removal Route Drawing NSC3 & Follow (AS3101009)

Coast Guard Drawing 750-WMSL-320-041, Rev C, Electrical One Line Diagram (NSC4 - SRD) (ASC320001D) (UNSIGNED)

Coast Guard Drawing 750-WMSL-521-047, Rev -, Firemain Diagram NSC4 (ASC521001D)

Coast Guard Drawing 750-WMSL-180-012, Rev H, Foundation Arrangement Drawing Design Unit 2110 BKLT No.1

Coast Guard Drawing 750-WMSL-521-26, Rev D, Firemain Unit 3110 (ASC521311-FM) (UNSIGNED)

Coast Guard Publications

Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and Allied Processes

Surface Forces Logistics Center Standard Specification 3041 (SFLC Std Spec 3041), 2022, Shipboard Electrical Cable Test

Surface Forces Logistics Center Standard Specification 3042 (SFLC Std Spec 3042), 2022, Shipboard Electrical Cable Removal, Relocation, Splice, Repair, and Installation

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures

Coast Guard Technical Publication (TP) 7013, 04-OCT-07, Self-Priming Centrifugal Pumps (Close Coupled)

Other References

Naval Sea Systems Command (NAVSEA) S0400-AD-URM-010/TUM, 5/23/2007, Tag-Out User’s Manual

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), 2004, Solvent Cleaning

The Society for Protective Coatings (SSPC) Surface Preparation Specification No.3 (SSPC-SP 3), 2004, Power Tool Cleaning

3. REQUIREMENTS

3.1 General.

3.1.1 CIR. The Contractor must submit a CIR for the inspections listed in the following paragraph(s):

None.

Tech Rep.

Not applicable.

3.1.3 Protective measures. The Contractor must furnish and install all protective measures in accordance with SFLC Std Spec 0000, paragraph 3.3.3 (Vessel component, space, and equipment protection).

3.1.4 Interferences. The Contractor shall be aware that interferences in way of work include, but are not limited to the below-listed. Handle all interferences in accordance with SFLC Std Spec 0000, paragraph 3.3.5 (Interferences):

• System fluid in the pump and associated piping.


• Piping.


• Electrical Cables.


• Coderdam Required

3.1.5 Work coordination. The Contractor shall perform work in conjunction with the following Work Item:

• Cofferdam Install

3.1.6 Fire Pump Overboard Connection. Provide diver services and plug the fire pump overboard connection. Provide diver services and remove the plug from the overboard connection upon completion of work.

3.1.6.1 The contractor shall install blank connections to isolate the fire pump from the sea as described below and as required by NAVSEA S0400-AD-URM-010/TUM Navy Tag-Out User’s Manual.

3.1.6.2 After installation of the overboard plug, break the fire main on the inboard side of the overboard valve and install a blank flange with gasket on the inboard side of the fire main overboard valve, protecting against flooding through the overboard valve.

3.1.6.3 Remove the blank upon completion of work and prior to removal of the plug in the overboard connection.

3.1.7 Fire pump suction connection. Temporarily close both the port and starboard sea chest suction valves and the fire pump suction from the sea chest. Break the fire pump suction connection on the downstream side of the valve and install a blank flange to allow continued use of the port and starboard sea chests.

3.1.7.1 Upon completion of repairs, temporarily close both the port and starboard sea chest suction valves and the fire pump suction from the sea chest. Remove the blank connection and reassemble the fire pump suction valve flange connections.

3.1.7.2 Fire pump discharge connection. Temporarily install a blank flange and gasket on the fire pump discharge piping flange as soon as the fire pump is disconnected to allow continued operation of the firemain in an emergency. Remove the blank flange and reconnect the fire pump upon completion of repairs.

3.1.7.3 Firemain pump piping connection is shown on the Coast Guard Drawing 750-WMSL-521-026.

3.1.8 Carne and rigging services. The Contractor shall provide crane and rigging services to renew GFP Fire Pump No.2. The Contractor shall provide rigging plan at the arrival conference.

3.1.8.1 If required, the Contractor must provide and install lifting pad eyes for removal and installation of Fire Pumpin accordance with SFLC Std Spec 0740. Remove lifting pad eyes after completion of the work item.

3.1.8.2 Maximum working load for various size pad eye is listed in the Table 2.The following Table 2 lists the maximum working loads for various sized pad eyes. Expected working loads may be considerably less

Please see attachments

Attachments/Links