Walking Excavator

Location: Oklahoma
Posted: Oct 28, 2026
Due: Nov 10, 2026
Agency: City of Tulsa
Type of Government: State & Local
Category:
  • 38 - Construction, Mining, Excavating, and Highway Mainenance Equipment
Solicitation No: IFB 27-512
Publication URL: To access bid details, please log in.
Bid ID: IFB 27-512
Addendum: 1
Bid Due Date: 11/10/2026
Description: Walking Excavator
Bid Document: IFB 27-512 - Walking Excavator - Addendum.pdf
Attachments:

Attachment Preview

Gross Weight / Size Minimum without tools: 10,600 kg
Engine 1. Deutz 4-cylinder diesel TCD 3.6 L4 hp or Acceptable Equivalent 2. Emissions level: US Tier 4 3. Displacement: 3621 cm3 4. Performance according to ISO 14396: 143 HP at 2,000 rpm 5. SCR catalytic converter with AdBlue supply

City of Tulsa Finance Department
10/28/2026
INVITATION FOR BID IFB 27-512
Addendum #1
Please note the following changes which have been made for clarification to this Invitation for Sealed Bid. This
addendum must be listed as Addendum #1 on the ACKNOWLEDGMENT OF RECEIPT OF
ADDENDA/AMENDMENTS FORM of the bid package as verification that you have received and are aware
of the information contained herein.
QUESTIONS/CLARIFICATION/CHANGES:
CHANGES:
Was:
Changed to:
Was:
Gross Weight / Size
Minimum without tools: 10,600 kg
1. Deutz 4-cylinder diesel TCD 3.6 L4 hp or Acceptable Equivalent
2. Emissions level: US Tier 4
Engine
3. Displacement: 3621 cm3
4. Performance according to ISO 14396: 143 HP at 2,000 rpm
5. SCR catalytic converter with AdBlue supply

6. Integrated diesel particulate filter with automatic regeneration 7. Maximum torque: 550 Nm at 1,600 rpm 8. Service interval: 500 Hour
Drive System 1. Driving speed max: 7.45 MPH 2. Separate hydraulic pump: 180 l/min, max. 420 bar 3. Service brake: hydrostatic 4. Holding brake: spring-loaded accumulator
Unmatched Forces 1. Lifting force: at 3.0 m boom length 9,100 kg 2. Lifting force: at 4.5 m boom length 4750 kg 3. Lifting force: at 6.0 m boom length 3100 kg 4. Breakaway force: 109 kN 5. Ripping force: 77 kN 6. Telescope thrust: 191 kN
Swiveling 1. Swivel range: 360 degrees endless 2. Swivel torque: 48,000 Nm 3. Swivel speed maximum: 10 rpm 4. Slewing ring module: 10 1,200 mm
Hydraulic System 1. Pumps swash plate axial piston pump 2. Work pump: 260/min, 320 bar 3. Fan pump: 50 l/min, 180 bar 4. Additional connections: 6
Hydraulics Control Circuit 1. Control circuit Q1 on the arm: proportional, liters and pressure adjustable max. 150 l/min, 50 - 320 bar 2. Control circuit Q2 on the arm: proportional, liters, and pressure adjustable max. 100 l/min, 50 - 320 bar 3. Control circuit Q3 on the arm: proportional, liters, and pressure adjustable max. 50 l/min, 50 - 320 bar 4. Control circuit Q4 on arm (quick coupler) 30 - 300 bar 5. Powerline, liters, and pressure adjustable max. 150 l/min, 50 - 350 bar 6. Winch connection on the chassis proportional, liters adjustable max. 120 l/min 7. Return line 8. Leakage line

TAC 396H | Landscape Maintenance - NSWWTP | Issue Date: 06/08/2026
6. Integrated diesel particulate filter with automatic regeneration
7. Maximum torque: 550 Nm at 1,600 rpm
8. Service interval: 500 Hour
1. Driving speed max: 7.45 MPH
Drive System 2. Separate hydraulic pump: 180 l/min, max. 420 bar
3. Service brake: hydrostatic
4. Holding brake: spring-loaded accumulator
1. Lifting force: at 3.0 m boom length 9,100 kg
2. Lifting force: at 4.5 m boom length 4750 kg
Unmatched Forces 3. Lifting force: at 6.0 m boom length 3100 kg
4. Breakaway force: 109 kN
5. Ripping force: 77 kN
6. Telescope thrust: 191 kN
1. Swivel range: 360 degrees endless
Swiveling 2. Swivel torque: 48,000 Nm
3. Swivel speed maximum: 10 rpm
4. Slewing ring module: 10 1,200 mm
1. Pumps swash plate axial piston pump
Hydraulic System 2. Work pump: 260/min, 320 bar
3. Fan pump: 50 l/min, 180 bar
4. Additional connections: 6
1. Control circuit Q1 on the arm: proportional, liters and pressure adjustable max. 150 l/min,
50 - 320 bar
2. Control circuit Q2 on the arm: proportional, liters, and pressure adjustable max. 100 l/min,
50 - 320 bar
3. Control circuit Q3 on the arm: proportional, liters, and pressure adjustable max. 50 l/min, 50
Hydraulics Control
Circuit - 320 bar
4. Control circuit Q4 on arm (quick coupler) 30 - 300 bar
5. Powerline, liters, and pressure adjustable max. 150 l/min, 50 - 350 bar
6. Winch connection on the chassis proportional, liters adjustable max. 120 l/min
7. Return line
8. Leakage line
IFB Rev 11/2022 2

Capacity 1. Fuel tank: 130L, or 34.34 gal 2. Fuel tank chassis: 215L or 56.80 gal 3. AdBlue tank: 20L or 5.28 gal 4. Hydraulic oil system volume: 200L or 52.83 gal
Tires Four (4) 300mm width 15in diameter
Upper Carriage 1. Diesel filling pump with automatic shutoff 2. Gas spring-assisted opening of side and rear cover 3. Integrated tool compartment 4. Direction recognition with automatic changeover 5. Cylinder on arm with end position damping 6. Control circuit Q1 + Q2 7. Return filter with optimized air separation: in to out
Cabin 1. Roll-Over-Protection-System: DIN ISO 3471 or Acceptable Equivalent 2. FOPS (Fall-Object Protective Structure) Protective grid roof Level II to DIN ISO 3449 compact or Acceptable Equivalent 3. Low-vibration and low-noise cabin 4. Grammer operator's comfort seat 5. Ergonomic joystick with Ix-Steering 6. Cab tiltable with hydraulic hand pump 7. 5 LED work lights 8. Spacious, ergonomic cockpit 9. Rear view camera 10. Powerful heater with 8 adjustable air nozzles 11. Pollen filter 12. DAB+ radio with USB/MP3 player 13. Start & stop on the joystick 14. Wiping and windscreen washer 15. Telekmatik tracking system or Acceptable Equivalent 16. LCD Display 12.1" touchscreen 17. USB charging station 18. Central electrics with LED fuse monitoring
Chassis 1. Optimally protected components 2. Winch attachment possible at front or rear

TAC 396H | Landscape Maintenance - NSWWTP | Issue Date: 06/08/2026
1. Fuel tank: 130L, or 34.34 gal
Capacity 2. Fuel tank chassis: 215L or 56.80 gal
3. AdBlue tank: 20L or 5.28 gal
4. Hydraulic oil system volume: 200L or 52.83 gal
Tires
Four (4) 300mm width 15in diameter
1. Diesel filling pump with automatic shutoff
2. Gas spring-assisted opening of side and rear cover
3. Integrated tool compartment
Upper Carriage
4. Direction recognition with automatic changeover
5. Cylinder on arm with end position damping
6. Control circuit Q1 + Q2
7. Return filter with optimized air separation: in to out
1. Roll-Over-Protection-System: DIN ISO 3471 or Acceptable Equivalent
2. FOPS (Fall-Object Protective Structure) Protective grid roof Level II to DIN ISO 3449
compact or Acceptable Equivalent
3. Low-vibration and low-noise cabin
4. Grammer operator's comfort seat
5. Ergonomic joystick with Ix-Steering
6. Cab tiltable with hydraulic hand pump
7. 5 LED work lights
8. Spacious, ergonomic cockpit
Cabin
9. Rear view camera
10. Powerful heater with 8 adjustable air nozzles
11. Pollen filter
12. DAB+ radio with USB/MP3 player
13. Start & stop on the joystick
14. Wiping and windscreen washer
15. Telekmatik tracking system or Acceptable Equivalent
16. LCD Display 12.1" touchscreen
17. USB charging station
18. Central electrics with LED fuse monitoring
Chassis 1. Optimally protected components
2. Winch attachment possible at front or rear
IFB Rev 11/2022 3

3. Electric winch collision protection 4. Automatic parking brake 5. Differential lock 6. Linear displacement sensors in the steering cylinder 7. Active angle sensors 8. Electric chain collision protection 9. Chassis cylinder with check valves
Manuals The Seller shall supply two (2) complete sets of parts, service, and operator's manuals.
Training 4-5 Day training
Gross Weight / Size Minimum without tools: 13,500 kg
Engine 1. Deutz 4-cylinder diesel TCD 4.1 L4 or Acceptable Equivalent 2. Engine capacity: 4038 cm3 3. Output as per ISO 3046: 155 hp at 2,000 rpm 4. SCR catalytic converter with AdBlue supply 5. Integrated diesel particulate filter with automatic regeneration 6. Maximum torque: 609 Nm at 1,500 rpm 7. Service interval: 500 Hour
Drive System 1. Driving speed max: 9.3 MPH 2. Separate hydraulic pump: 210 l/min, max. 400 bar 3. Service brake: hydrostatic 4. Holding brake: spring-loaded accumulator
Unmatched Forces 1. Lifting force at 3.0 m boom length: 9,800 kg 2. Lifting force at 4.5 m boom length: 6400 kg 3. Lifting force at 6.0 m boom length: 4300 kg 4. Breakaway force: 109 kN 5. Ripping force: 74 kN 6. Telescope thrust: 191 kN
Swiveling 1. Swivel range: 360 degrees endless

TAC 396H | Landscape Maintenance - NSWWTP | Issue Date: 06/08/2026
3. Electric winch collision protection
4. Automatic parking brake
5. Differential lock
6. Linear displacement sensors in the steering cylinder
7. Active angle sensors
8. Electric chain collision protection
9. Chassis cylinder with check valves
Manuals
The Seller shall supply two (2) complete sets of parts, service, and operator's manuals.
Training
4-5 Day training
Changed to:
Gross Weight / Size
Minimum without tools: 13,500 kg
1. Deutz 4-cylinder diesel TCD 4.1 L4 or Acceptable Equivalent
2. Engine capacity: 4038 cm3
3. Output as per ISO 3046: 155 hp at 2,000 rpm
Engine
4. SCR catalytic converter with AdBlue supply
5. Integrated diesel particulate filter with automatic regeneration
6. Maximum torque: 609 Nm at 1,500 rpm
7. Service interval: 500 Hour
1. Driving speed max: 9.3 MPH
Drive System 2. Separate hydraulic pump: 210 l/min, max. 400 bar
3. Service brake: hydrostatic
4. Holding brake: spring-loaded accumulator
1. Lifting force at 3.0 m boom length: 9,800 kg
2. Lifting force at 4.5 m boom length: 6400 kg
Unmatched Forces 3. Lifting force at 6.0 m boom length: 4300 kg
4. Breakaway force: 109 kN
5. Ripping force: 74 kN
6. Telescope thrust: 191 kN
Swiveling
1. Swivel range: 360 degrees endless
IFB Rev 11/2022 4

2. Swivel torque: 52,000 Nm 3. Swivel speed maximum: 10 rpm 4. Slewing ring module 10: 1,200 mm
Hydraulic System 1. Pumps swash plate axial piston pump 2. Work pump: 290/min, 320 bar 3. Fan pump: 50 l/min, 200 bar 4. Additional connections: 6
Hydraulics Control Circuit 1. Control circuit 1 on boom: proportional, liters adjustable max. 200 l/min 2. Control circuit 2 on boom: proportional, liters adjustable max. 100 l/min 3. Control circuit 3 on boom: (digital, liters adjustable) max. 50 l/min 4. Control circuit 4 on boom: (quick changer) 30 - 300 bar 5. Powerline (digital, liters, and pressure adjustable) max. 220 l/min 350 bar 6. Winch connection on the chassis proportional, liters adjustable max. 120 l/min 7. Return line (on boom) 8. Leak oil line
Capacity 1. Fuel tank: 180L, or 47.5 gal 2. Fuel tank chassis: 240 L or 63.4 gal 3. AdBlue tank: 20L or 5.28 gal 4. Hydraulic oil system volume: 220L or 58.1 gal
Tires Four (4) 600mm/50-22.5 (forestry)
Upper Carriage 1. Diesel input pump including limit stop 2. Gas spring-assisted opening of side and rear cover 3. Integrated tool compartment 4. Direction recognition with automatic changeover 5. Cylinder on arm with end position damping 6. Control circuit 1 + 2 hydraulics 7. Return filter with optimized air separation: in to out
Cabin 1. Roll-Over-Protection-System: DIN ISO 3471 or Acceptable Equivalent 2. FOPS (Fall-Object Protective Structure) Protective grid roof DIN ISO 3449 or Acceptable Equivalent 3. Low-vibration and low-noise cabin 4. Grammer operator's comfort seat with ventilation

TAC 396H | Landscape Maintenance - NSWWTP | Issue Date: 06/08/2026
2. Swivel torque: 52,000 Nm
3. Swivel speed maximum: 10 rpm
4. Slewing ring module 10: 1,200 mm
1. Pumps swash plate axial piston pump
Hydraulic System 2. Work pump: 290/min, 320 bar
3. Fan pump: 50 l/min, 200 bar
4. Additional connections: 6
1. Control circuit 1 on boom: proportional, liters adjustable max. 200 l/min
2. Control circuit 2 on boom: proportional, liters adjustable max. 100 l/min
3. Control circuit 3 on boom: (digital, liters adjustable) max. 50 l/min
Hydraulics Control
4. Control circuit 4 on boom: (quick changer) 30 - 300 bar
Circuit
5. Powerline (digital, liters, and pressure adjustable) max. 220 l/min 350 bar
6. Winch connection on the chassis proportional, liters adjustable max. 120 l/min
7. Return line (on boom)
8. Leak oil line
1. Fuel tank: 180L, or 47.5 gal
Capacity 2. Fuel tank chassis: 240 L or 63.4 gal
3. AdBlue tank: 20L or 5.28 gal
4. Hydraulic oil system volume: 220L or 58.1 gal
Tires
Four (4) 600mm/50-22.5 (forestry)
1. Diesel input pump including limit stop
2. Gas spring-assisted opening of side and rear cover
3. Integrated tool compartment
Upper Carriage
4. Direction recognition with automatic changeover
5. Cylinder on arm with end position damping
6. Control circuit 1 + 2 hydraulics
7. Return filter with optimized air separation: in to out
1. Roll-Over-Protection-System: DIN ISO 3471 or Acceptable Equivalent
2. FOPS (Fall-Object Protective Structure) Protective grid roof DIN ISO 3449 or Acceptable
Cabin
Equivalent
3. Low-vibration and low-noise cabin
4. Grammer operator's comfort seat with ventilation
IFB Rev 11/2022 5

5. Ergonomic joystick 6. Cab tiltable with hydraulic hand pump 7. 5 LED work lights 8. Spacious, ergonomic cockpit 9. Rear view camera 10. Powerful heater with 7 adjustable air nozzles 11. Pollen filter 12. DAB+ radio with CD/USB/MP3 player 13. Wiping and windscreen washer 14. Trackunit remote diagnostics or Acceptable Equivalent 15. LCD Display 16. USB charging station
Chassis 1. Optimally protected components 2. Winch attachment possible at front or rear 3. Electric chain collision protection 4. Automatic parking brake 5. Differential lock 6. Linear travel sensors in the steering cylinder 7. Active angle sensors 8. Chassis cylinder with check valves
Manuals The Seller shall supply two (2) complete sets of parts, service, and operator's manuals in English
Training 4-5 Day training at the delivery including driving, operating, and maintenance of equipment

TAC 396H | Landscape Maintenance - NSWWTP | Issue Date: 06/08/2026
5. Ergonomic joystick
6. Cab tiltable with hydraulic hand pump
7. 5 LED work lights
8. Spacious, ergonomic cockpit
9. Rear view camera
10. Powerful heater with 7 adjustable air nozzles
11. Pollen filter
12. DAB+ radio with CD/USB/MP3 player
13. Wiping and windscreen washer
14. Trackunit remote diagnostics or Acceptable Equivalent
15. LCD Display
16. USB charging station
1. Optimally protected components
2. Winch attachment possible at front or rear
3. Electric chain collision protection
Chassis 4. Automatic parking brake
5. Differential lock
6. Linear travel sensors in the steering cylinder
7. Active angle sensors
8. Chassis cylinder with check valves
Manuals The Seller shall supply two (2) complete sets of parts, service, and operator's manuals in
English
Training
4-5 Day training at the delivery including driving, operating, and maintenance of equipment
IFB Rev 11/2022 6

EVENT DATE
IFB Issue Date 10/12/2026
Mandatory Pre-Bid Conference Virtual Teams Meeting Email rachelharders@cityoftulsa.org for invite 10/20/2026 at 10:00 AM CT
Deadline for Questions Submitted to assigned buyer via email. 11/02/2026 9 Days prior to IFB due date
Bid Submission Date Either mailed or delivered to City Clerk address. Bids are open the day after the due date. 11/10/2026

City of Tulsa Finance Department
Invitation for Bid (IFB)
IFB 27-512
Supplies or Services Requested: Walking Excavator
Department: Public Works
NIGP Commodity Code(s): 760-23
Solicitation Schedule
EVENT DATE
IFB Issue Date 10/12/2026
Mandatory Pre-Bid Conference 10/20/2026 at 10:00 AM CT
Virtual Teams Meeting
Email rachelharders@cityoftulsa.org for invite
Deadline for Questions 11/02/2026
Submitted to assigned buyer via email. 9 Days prior to IFB due date
Bid Submission Date 11/10/2026
Either mailed or delivered to City Clerk address. Bids
are open the day after the due date.
If You have any questions or need additional information, contact the Assigned Buyer:
Rachel Harders, Buyer | rachelharders@cityoftulsa.org
All questions should be emailed with IFB 27-512 on the subject line.
Submit Bids (sealed) to:
City of Tulsa - City Clerk's Office
175 E. 2ND St., Suite 260
Tulsa, OK 74103
Bids (2 total:1 original, 1 copy) must be sealed and either mailed or delivered.
Write the Bid Number, Supplies or Service requested (as listed above) and Bid
Opening Date on the lower left corner of the outside of Your Bid envelope. Feel
free to use included packing slip. No faxed or emailed Bids will be considered.
Barring certain circumstances (Section III-5), Bids received after the stated date
and time will not be accepted and will be returned to the Bidder unopened.

IFB 27-512 | Walking Excavator | Issue Date: 10/12/2026
I. STATEMENT OF PURPOSE:
1. Overview and Goals
The goal of this solicitation is to secure a source to purchase a Walking Excavator for the Public
Works Department of the City of Tulsa.
2. Term of Contract
The City intends to award a one-year annual contract. The City may offer the Seller the opportunity
for additional one-year terms. The City also reserves the right to make multiple or partial awards. To
do business with the City, You must agree to the terms and conditions of the City's standard
Purchase Agreement, indicated by Your Authorized Agent's signature on the Purchase Agreement.
Capitalized terms used in this IFB and not defined in the Purchase Agreement shall have the
meanings as ascribed to them in Title 6, Chapter 4 of the Tulsa Revised Ordinances.
The entire Invitation for Bid (IFB), including any additional information submitted by Bidder and
Accepted by City will be included as part of the Agreement between Seller and City. All sheets of
this IFB (including Sections I-VI) must be submitted.
Authorized Agent
Several parts of the Bid (Affidavits, Purchase Agreement) must be signed by an "Authorized
Agent." An Authorized Agent means an agent who is legally authorized to bind the Seller under the
law of the state in which the Seller is legally organized. For instance, under Oklahoma law, the
Authorized Agent for each of the following types of entities is as stated below:
o Corporations - the president, board chair or board vice chair (or the vice president if the corporation
was formed in Oklahoma) can sign; others can sign if they have and provide the City with (i) a corporate
resolution giving them authority to bind the Seller, and (ii) a recent certificate of secretary indicating
the authority is still valid and was in full force and effect on the date of the signature. (See IFB Section
VI for sample of a Certificate of Secretary)
o General Partnerships - any partner can sign to bind all partners.
o Limited Partnerships - the general partner must sign.
o Individuals - no additional authorization is required, but signatures must be witnessed and notarized.
o Sole Proprietorship - the owner can sign. Any other person can sign if s/he provides a recent Power
of Attorney, signed by the owner, authorizing him/her to bind the sole proprietorship.
o Limited Liability Company (LLC) - any manager of the LLC elected by the members of the LLC, or
any member signing as manager of the LLC. All other signers will need a Consent of Members signed
by all the Members of the LLC authorizing their signature on or up to 30 days before the date of their
signature. (See Section VI for sample of a Consent of Members)
Entities organized in states other than Oklahoma must follow the law of the state in which they are
organized.
IFB Rev 02/2024 8

If bidding an equivalent, You must include descriptive manufacturer's literature verifying the
information You provided in the Bidder's Response column with Your submission.

IFB 27-512 | Walking Excavator | Issue Date: 10/12/2026
II. SCOPE OF SERVICES AND SPECIFICATIONS
1. Scope of Services
The City is requesting Bids for a Walking Excavator for the Public Works Department.
Delivery Requirements
All prices quoted shall be based on delivery F.O.B. Tulsa, Oklahoma or to any other points as may
be designated in the Specifications, with all charges prepaid by Seller to the actual point of delivery.
Bids must state the number of Days required for delivery under normal conditions.
Absolutely no items over 500lbs. may be directly shipped to the City requiring the City personnel to
unload from the shipping truck or trailer. The City carries no responsibility for any damages incurred
during an unloading occurrence. All unloading shall be the responsibility of the Seller and/or shipping
entity.
2. Specifications
The Bid must meet or exceed the following Specifications.
In the Table below, the Bidder shall respond to each minimum requirement set forth in the
Specifications column by writing its response in the space provided under Section 2: Bidder's
Response column. Whenever asked to "describe", the description may include details such as size,
capacities, dimensions, materials used in construction, etc. A full and complete description is
required to reasonably evaluate the Bid, so all pertinent information is required. When referring to
attached literature as a means of not fully describing items, misinterpretations by the evaluator of the
Bid may occur. Your ability to present the City with enough information to reasonably understand the
item being bid and whether it meets the Specifications stated herein relies on the written information
provided.
You are required to describe Your proposed equipment in the Bidder's Response column, in terms
that correspond with the minimum Specifications shown. You may not answer in the space provided
as to whether You meet the Specifications by responding with terms as "yes", "meets", "same as",
"complies" or "similar" terms. If these terms are utilized, it shall result in Your Bid being
considered as non-responsive and being rejected.
If bidding an equivalent, You must include descriptive manufacturer's literature verifying the
information You provided in the Bidder's Response column with Your submission. Failure to
provide such literature shall result in Your Bid being considered as non-responsive and being
rejected. Any determination as to whether an item is equivalent that meets the Specifications shall
be made at the sole discretion of the City.
Seller shall ensure that each machine and related parts are warranted by the manufacturer to be of
good material and workmanship and that manufacturer promptly replace any part or parts which by
reason of defective materials or workmanship shall fail under normal use, free of negligence or
accident, for a minimum of one (1) year from the date of delivery, unless otherwise stated herein. In
addition, if such failures take place outside the dealer's service area, which shall be defined as Tulsa
city limits, the Seller will be responsible for reimbursing the nearest manufacturer's authorized dealer
in the city of Tulsa for services rendered under this warranty.
The Seller shall respond within 72 hours of notification by the City of Tulsa, on when, where, and
how a warranty issue will be resolved. In the event there is no response within 72 hours, or if the
IFB Rev 02/2024 9

SECTION 1: ITEM MINIMUM SPECIFICATIONS SECTION 2: BIDDER'S RESPONSE
General New, Unused Menzi Muck M545X Walking Excavator or Acceptable Equivalent Describe: Make: Model:
Gross Weight / Size Minimum without tools: 13,500 kg Describe:
Engine 1. Deutz 4-cylinder diesel TCD 4.1 L4 or Acceptable Equivalent 2. Engine capacity: 4038 cm3 3. Output as per ISO 3046: 155 hp at 2,000 rpm 4. SCR catalytic converter with AdBlue supply 5. Integrated diesel particulate filter with automatic regeneration 6. Maximum torque: 609 Nm at 1,500 rpm 7. Service interval: 500 Hour Describe: 1. 2. 3. 4. 5. 6. 7.
Drive System 1. Driving speed max: 9.3 MPH 2. Separate hydraulic pump: 210 l/min, max. 400 bar 3. Service brake: hydrostatic 4. Holding brake: spring-loaded accumulator Describe: 1. 2. 3. 4.
Unmatched Forces 1. Lifting force at 3.0 m boom length: 9,800 kg Describe: 1.

IFB 27-512 | Walking Excavator | Issue Date: 10/12/2026
response is not acceptable to the City of Tulsa; the City will provide or arrange for repairs. The Seller
shall be responsible for reimbursing the nearest manufacturer's authorized dealer in the city of Tulsa
for services rendered under this warranty.
The Seller shall have the option to authorize the City of Tulsa to perform minor warranty
replacement and repairs and then reimburse the City for its labor and parts utilized to enact
the repair. The reimbursement for labor will be the same rate as that of the actual work
performed. Standard warranty information is to be supplied with the Bid.
TESTS AND ACCEPTABILITY OF MATERIAL:
All items included in the Bid are subject to a performance demonstration within 30 days of the Bid
date by the Bidder(s) at the discretion of the City of Tulsa. A like item of the type Bid that contains
all the safety concerns, horsepower ratings, accessories, dimensions or other features as deemed
appropriate by the City of Tulsa may be required to be demonstrated to the City of Tulsa personnel
prior to award of the Bid to establish if the item meets the requirements and Specifications of the City
of Tulsa.
SECTION 1:
MINIMUM SPECIFICATIONS SECTION 2: BIDDER'S RESPONSE
ITEM
Describe:
New, Unused Menzi Muck M545X Walking Excavator
General Make:
or Acceptable Equivalent
Model:
Describe:
Gross
Weight / Size Minimum without tools: 13,500 kg
Describe:
1. Deutz 4-cylinder diesel TCD 4.1 L4 or Acceptable 1.
Equivalent
2. Engine capacity: 4038 cm3 2.
3. Output as per ISO 3046: 155 hp at 2,000 rpm 3.
Engine
4. SCR catalytic converter with AdBlue supply 4.
5. Integrated diesel particulate filter with automatic 5.
regeneration
6. Maximum torque: 609 Nm at 1,500 rpm 6.
7. Service interval: 500 Hour 7.
Describe:
1. Driving speed max: 9.3 MPH 1.
Drive
2. Separate hydraulic pump: 210 l/min, max. 400 bar 2.
System
3. Service brake: hydrostatic 3.
4. Holding brake: spring-loaded accumulator 4.
Describe:
Unmatched
Forces 1. Lifting force at 3.0 m boom length: 9,800 kg 1.
IFB Rev 02/2024 1 0

This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.
Daily notification on new contract opportunities

With GovernmentContracts, you can:

  • Find more opportunities and win more business
  • Receive daily alerts for all new bid opportunities
  • Get contract opportunities matched to your business
ONE WEEK FREE TRIAL

See also

Follow DRIVE UNIT,HYDRAULIC Active Contract Opportunity Notice ID SPRTA126R0001 Related Notice SPRTA126R0001 Department/Ind.

DEPT OF DEFENSE

Bid Due: 12/30/2026

Follow B-2 Relay Assembly NSN: 5945-01-442-4318FW Active Contract Opportunity Notice ID FA811926R0008 Related

DEPT OF DEFENSE

Bid Due: 11/18/2026

Follow WWYK260004 - REPAIR STRUCTURAL INTEGRITY, B1134, POST 34 & NORTH WALL Active

DEPT OF DEFENSE

Bid Due: 11/16/2026

Follow FA811826R0055- Repair of the F-16 Oxygen Monitor NSN 1660-01-473-3548 Active Contract Opportunity

DEPT OF DEFENSE

Bid Due: 11/16/2026

* Disclaimer: Information regarding bids, requests for proposals (RFPs), or requests for qualifications (RFQs) is provided on this website only for convenience and does not constitute official public notice. Persons wishing to respond to or inquire about bids, RFPs, or RFQs should contact the appropriate government department.