Chavez High School Theater Stage Update Project- IFB 26-09 ADDENDUM #2

Location:	California
Posted:	Apr 13, 2026
Due:	Apr 17, 2026
Agency:	Stockton Unified School District
Type of Government:	State & Local
Category:	99 - Miscellaneous
Publication URL:	To access bid details, please log in.

Attachment Preview

John Sergio Fisher & Associates Inc.

5567 Reseda Blvd. Suite 209

Los Aneles, CA 91356

818.344.3045

Fax 818.344.0338

ADDENDUM #2

jsfa

Project:

Date:

Owner:

Architect:

CESAR CHAVEZ H.S. THEATRE RENOVATION

2929 Windflower Lane

Stockton, CA 95212

April 13, 2026

Stockton Unified School District

1944 El Pinal Drive

Stockton, CA 95212

John Sergio Fisher & Associates

5567 Reseda Boulevard, Suite 209

Los Angeles, CA 91356

A. This Addendum of clarifications, modifications, changes, additions, and/or deletions contained

herein shall be considered part of the Bid Documents for the above referenced Project as

though it had been issued at the same time and shall be incorporated integrally with the

Construction Documents for the project. Where provisions of the following supplementary

data differ from those of the Original Bid Documents, this Addendum shall govern and take

precedence.

B. Bidders are hereby notified that they shall make any adjustments in their estimates as a

result of this Addendum. It will be understood that each bidder's proposal is submitted with

full knowledge of all modifications and supplemental data specified herein.

1. CHANGES AND ADDITIONS TO THE BID DOCUMENTS

SPECIFICATIONS:

Item No. 2.01 Section 01 64 00 OWNER-FURNISHED PRODUCTS

sub-section 2.02 FURNISHED MATERIALS AND EQUIPMENT - REVISED

Item No. 2.02 Section 2.4.6 in the PLA covers specialized – See attached exhibit H

Item No. 2.03 Federal Byrd anti-lobbying is not required for this project.

Item No. 2.04 AV Systems: The Sure SLXD1 and SLXD2 have been replaced by the

SLXD1+ and the SLXD2+, respectively, by the manufacturer.

Cesar Chavez Theatre Renovation

Addendum 1

Page 1 of 1

DOCUMENT 01 64 00

OWNER-FURNISHED PRODUCTS

PART 1 – GENERAL

1.01 RELATED DOCUMENTS AND PROVISIONS

All Contract Documents should be reviewed for applicable provisions related to the

provisions in this document, including without limitation:

General Conditions;

Special Conditions; and

C. Materials and Equipment.

1.02 SECTION INCLUDES

Requirements for the following:

(1) Installing Owner-furnished materials and equipment.

(2) Providing necessary utilities, connections and rough-ins.

1.03 DEFINITIONS

Owner: District, who is providing/furnishing materials and equipment.

Installing Contactor: Contractor, who is installing the materials and

equipment furnished by the Owner.

1.04 PRODUCT DELIVERY, STORAGE, AND HANDLING

Receive, store and handle products in accordance with the manufacturer’s

instructions.

Protect equipment items as required to prevent damage during storage and

construction.

PART 2 – PRODUCTS

2.01 GENERAL PRODUCT REQUIREMENTS

Installing Contractor’s Responsibilities:

(1) Verify mounting and utility requirements for Owner-furnished materials

and equipment items.

(2) Provide mounting and utility rough in for all items where required.

STOCKTON UNIFIED SCHOOL DISTRICT

OWNER-FURNISHED PRODUCTS

DOCUMENT 01 64 00-1

(a) Rough in locations, sizes, capacities, and similar type items

shall be as indicated and required by product manufacturer.

Owner and Installing Contractor(s) Responsibilities:

(1) Owner-Furnished/Contractor Installed (“OFCI”): Furnished by the

Owner; installed by the Installing Contractor.

(a) General: Owner and Installing Contractor(s) will coordinate

deliveries of materials and equipment to coincide with the

construction schedule.

(b) Owner will furnish specified materials and equipment delivered

to the site. Owner/vendor’s representative shall be present on

Site at the time of delivery to comply with the contract

requirements and Specifications Section 01 43 00, Materials

and Equipment, Article 1.04.

responsible to provide manufacturer guarantees as required by

the Contract to the Installing Contractor.

(d) The Installing Contractor shall:

1) Review, verify and accept the approved manufacturer’s

submittal/Shop Drawings for all materials and

equipment required to be installed by the Installer

Contractor and furnished by the Owner. Any

discrepancies, including but not limited to possible space

conflicts, should be brought to the attention of the

Project Manager and/or Program Manager, if applicable.

2) Coordinate timely delivery. Installing Contractor shall

receive materials and equipment at Site when delivered

and give written receipt at time of delivery, noting

visible defects or omissions; if such declaration is not

given, the Installing Contractor shall assume

responsibility for such defects and omissions.

3) Store materials and equipment until ready for

installation and protect from loss and damage.

Installing Contractor is responsible for providing

adequate storage space.

4) Coordinate with other bid package contractors and field

measurement to ensure complete installation.

5) Uncrate, assemble, and set in place.

6) Provide adequate supports.

7) Install materials and equipment in accordance with

manufacturer’s recommendations, instructions, and

STOCKTON UNIFIED SCHOOL DISTRICT

OWNER-FURNISHED PRODUCTS

DOCUMENT 01 64 00-2

Shop Drawings, supply labor and material required, and

make mechanical, plumbing, and electrical connections

required to operate equipment.

8) Be certified by equipment manufacturer for installation

of the specific equipment supplied by the Owner.

9) Provide anchorage and/or bracing as required for

seismic restraint per Title 24, UBC Standard 27-11 and

all other applicable codes.

10) Provide the contract-required warranty and guarantee

for all work, materials and equipment, and installation

upon its completion and acceptance by the District.

Guarantee includes all costs associated with the

removal, shipping to and from the Site, and re-

installation of any equipment found to be defective.

C. Compatibility with Space and Service Requirements:

(1) Equipment items shall be compatible with space limitations indicated

and as shown on the Contract Documents and specified in other

sections of the Specifications.

(2) Modifications to equipment items required to conform to space

limitations specified for rough in shall not cause additional cost to the

District.

D. Manufacturer’s printed descriptions, specifications, and instructions shall

govern the Work unless specifically indicated or specified otherwise.

2.02 FURNISHED MATERIALS AND EQUIPMENT

All furnished materials and equipment are indicated or scheduled on the

Contract Documents.

Products listed in the following sections shall be Owner Furnished Contractor

Installed (OFCI):

(1) 11 06 40 Theatrical Lighting Control

(2) 11 06 50 Theatrical Lighting Fixtures

(3) AV Speakers and controls listed on the AV drawings

C. Products listed in the following sections shall be Owner Furnished Owner

Installed (OFOI):

(1) 11 06 10 Theatrical Rigging Systems and Controls

(2) 11 06 60 Stage Lift

(3) 14 42 16 Inclined Platform Wheelchair Lift

D. Products listed in the following sections shall be Owner Furnished Rigging

Contractor Installed (OFRCI):

STOCKTON UNIFIED SCHOOL DISTRICT

OWNER-FURNISHED PRODUCTS

DOCUMENT 01 64 00-3

(1) 11 06 20 Theatrical Drapery and Track

a. Owner to provide drapery

b. Rigging Contractor to provide remainder for complete drapery

installation.

PART 3 – EXECUTION

3.01 INSTALLATION

Install equipment items in accordance with the manufacturer’s instructions.

Set equipment items securely in place, rigidly or flexibly mounted in

accordance with manufacturers’ directions.

C. Make electrical and mechanical connections as indicated and required.

D. Touch-up and restore damaged or defaced finishes to the Owner’s

satisfaction.

3.02 CLEANING AND PROTECTION

Repair or replace items not acceptable to the Architect or Owner.

Upon completion of installation, clean equipment items in accordance with

manufacturer’s recommendations, and protect from damage until final

acceptance of the Work by the Owner.

END OF DOCUMENT

STOCKTON UNIFIED SCHOOL DISTRICT

OWNER-FURNISHED PRODUCTS

DOCUMENT 01 64 00-4

This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.

Chavez High School Theater Stage Update Project- IFB 26-09 ADDENDUM #2

Attachment Preview

See also