Defense Supply Center Richmond(DSCR) Building 100(CDC) Perimeter Fence Replacement

This is a pre-solicitation notice for an upcomming contracting opportunity. The Statement of Work(SOW) is attached for reference for full scope of work. The full solicitation will be posted on, or around 02/14/25, and remain open for 30 days, with a deadline for submissions date of COB 03/18/25.

A site visit will be held 02/26/25 @ 1000 on-site at Defense Supply Center Richmind(DSCR). Parties interested in attending the site visit must register by beginning the security screening process for visitors. Follow the link below. Due to processing time for base security, submit requests for base access/site visit coordination no later than COB 02/20/25. This will allow 3 working days for processing.

Follow these steps in order to register for the site visit.

1. Follow the link below. You will be prompted to provide a sponsor for your visit. The sponsor for all site visit attendees will be the Project Manager for this requirement, Jeff Bickham (Work Cell: 804-516-2371).

2.After the link above has been followed, you should have been provided with a QR code. You must email the QR code to the Project Manager at the email address provided in step 1, in order to pre-register for the site visit.

Additional DSCR Visitor Information

A new system was implemented on 3 January 2023 to screen visitors and contractors for installation access at DSCR. The new system is designed to increase efficiencies, enhance the protection of personal information during the vetting process and eliminate the use of hard copy DLA Form 1815s. The new screening system will require visitors and contractors to pre-enroll in DBIDS (Defense Biometric Identification System). To begin the process, visitors and contractors will complete registration through the preenrollment website: https://dbids-global-enroll.dmdc.mil.

Upon entry of their information, visiting personnel will be provided an electronic form to download, which will have an individualized barcode and alpha numeric code. The codes should be submitted to the Project Manager/sponsor. Once in receipt of the barcode, the sponsor will email Security and Emergency Services and provide the bar

code and sponsorship information. Once the visitor/contractor is vetted and approved for installation access, Security & Emergency Services will notify the sponsor that the visitor/contractor can go to the DSCR Visitor Center to obtain his/her pass. At the Visitor Center, the visitor provides the barcode and code provided earlier in the process and completes the credentialing process.