MCAAP Maintenance-of-Way Railroad Vehicles/Equipment

Active

Contract Opportunity

MUST BE NEW EQUIPMENT. NO REFURBISHED OR REBUILT.

Performance Specifications

Purchase Description – CLIN 0001

2024 Nordco Model TRIPP-HD Tie Inserter/Remover or equivalent

Model:

• Nordco 2024 Model TRIPP-HD Tie Inserter/Remover or equivalent


• For operation on standard 56.5" gauge track


• Machine must be new and unused, not reconditioned

Chassis:

• Heavy Duty Welded Center Beam Type Steel Frame


• Federal Yellow Paint Spec No. 535C-13538 Standard Paint


• Left Front Manual Anti-De-Rail


• 3 Lifting Eyes for Lifting Machine


• 4" Standard Bumpers Included


• 10 Keyhole Tie-downs welded on the Frame


• 1 each Front/Rear Tow Bar Chain Holder


• Mitten Style Standard Tow hitch


• Black Metal Lockable Tool Box (14"x32"x19") mounted to Frame


• Remote Lockable Fluid Drains - Color Coded


• 4" DOT Reflective Tape

Power Unit:

• Tier IV Final Diesel Engine


• Dry Type Air Cleaner


• 145 Gal. Diesel Fuel Tank Capacity


• Fuel Level Site Gauge on Tank


• High Temperature- Low Oil Pressure Warning


• Engine De-Rate and Warning System in Cab


• Murphy Engine System Display


• Standard Murphy Instrumentation including Engine Oil Pressure, Coolant Temperature, Hour Meter, Tachometer, Voltmeter


• Remote Lockable Engine Oil Drain

Propulsion System:

• 4 Wheel Hydraulic Motor driven Axle, Chain & Sprocket Propulsion Drive


• Travel Speeds up to 22 mph


• Solid Pillow Block Bearing Supported Axles (see upgrade option)


• Insulated Axles with Shunting Option


• 24" Diameter, Hub Mounted, Cast Steel Wheels


• Air Applied Cobra Style Brake Shoes


• Parking Brake - Spring Applied - Air Released - Pull to Apply


• Air Ride Travel Suspension


• 3 Second Travel Alarm

Lighting & Electrical:

• 24 VDC, Circuit Breaker Protected, Electrical System


• PLC Electrical Control System


• Two Each 4x6 LED Grote Travel Lights, Front & Rear


• Two Each 4x6 LED Grote Work Lights over Each Rail


• Two Each Red Marker/Brake Lights, Front & Rear


• Amber Strobe


• Master Disconnect Switch beside Battery Box

Cabin:

• One Man, Heavy-Duty, Fully Enclosed Fabricated Steel Cab


• Engine Driven Air Conditioner/Heater (Red Dot)


• Pressurizer is Standard


• 3 Speed Fan in Heater


• 1 Operator and Defrost Bi-directional Fans


• Tinted Windows, Safety Glass where equipped with Wipers


• Lexan Tinted Windows where Safety Glass is not Installed


• Windshield Wipers - Forward and Reverse & Work Viewing Area


• Hydraulic Reservoir Temperature Gauge in Cab


• Fuel Level Gauge in Cab


• Speedometer


• Workhead Cycle Counter


• Air Trumpet Horns - 120 Db at 1 Meter


• Sliding Side Windows


• Log Book/Manual box - 12" x 13" x 4"


• Adjustable, Mechanical Suspension Operator's Seat with Seat Belt


• West Coast Type Mirrors


• International Control Symbols


• 12V, 20 AMP MOW Radio Circuit


• 2 Red Emergency Stop Button


• "Danger Live Track" Retractable Belt


• 5# ABC Fire Extinguisher


• First Aid Kit

Hydraulics:

• Single 170 Gallon Hydraulic Tank Capacity located behind Cab


• Dual, Pressure Compensated, Hydraulic Pumps 2500 psi


• Steel Manifold


• Electrical Control Valves


• Pressure & Return Line Filtration


• Joystick Type Hydraulic Operator Controls


• Cab Controlled Locks on Workhead Cylinders


• Electric Emergency Hydraulic Pump


• Lockable Suction Strainer 90 micron


• Filtered Manual Hydraulic Tank Fill System


• Thermostatically Controlled Oil Cooler


• 1" Quick Disconnect Filtration Loop Fittings

Tie Insertion / Removal Equipment:

• Heavy Duty Workhead


• Improved Wood Tie Gripper Assemblies with Dual Finger Inserts


• Automatic Rail Lift controls with Manual Override


• Two 82" Stroke Workheads to work on either side of track


• 12,880 lbs. Inserting Force


• 20,740 lbs. Removing Force


• Suitable for handling wood or concrete ties

General:

• Installation of Customer Supplied Decals


• Scissor Lockout-Tagout


• Lockable Battery Disconnect Switch


• Two Printed and One USB Electronic Maintenance, Operation and Parts Manuals w/recommended spare parts list


• 6 Month, 1000 Hours, First to Occur, Standard Warranty


• Delivery & Setup at McAlester Army Ammunition Plant, McAlester, OK

Weights & Dimensions:

• Estimated Shipping/Operating Weight 38,000 lbs.


• Est. Length 39'3"


• Est. Width 10'6"


• Est. Height 11' shipping - 11' 2" Operational

Additional Optional Equipment:

General:

• Back-Up Alarm, Switchable for Direction of Travel


• Extra Parts/Operation/Maintenance Manual Box


• Rail Sweeps (Ahead of front/behind rear wheels) - Vertical Rubber Flap


• Two Additional Keyhole Tiedowns (Front & Rear)

CAB:

• 12V, 20 AMP MOW Radio Circuit


• 3/5 Second Timer Backup Alarm


• Interior Cab Lights LED


• Low Hydraulic Oil - High Hydraulic Oil Temp Alarm


• Pressure Gauge for System Hydraulic Circuit in Cab


• Suspension Seat Upgrade

Lighting:

• All lights turn ON with Battery Switch


• UPGRADE Perimeter Lighting to GROTE LED


• Upgrade Work Light to Grote LED

Maintenance:

• Extra Parts/Operation/Maintenance Manuals (2)


• Fuel Level Site Gauge on Tank with Cage


• Lockable Battery Switch


• TRIPP Spare Parts Package

Storage:

• Track Tool Box (8x8x64), w/Tow Bar, D Handle Hitch Pins & Bumper Extensions

TRIPP:

• Front and Rear Mounted Camera with Display in Cab

Purchase Description – CLIN 0002

2024 Nordco CX Hammer Production Spike Driver or equivalent

Model:

• Nordco Model CX Hammer Production Spike Driver or equivalent


• Standard Boom & Winch configuration


• For operation on standard 56.5”-gauge track


• Machine must be new and unused, not reconditioned

Chassis:

• Federal Yellow Paint Spec No. 535C-13538 Standard Paint


• Heavy Duty Welded Steel Frame


• Lifting Bail for Lifting Machine


• Positive Locking Turntable w/ Aluminum Base


• 4” Standard Bumpers Included


• 16 Keyhole Tie downs


• Mitten Style Standard Tow hitch


• Black Metal Lockable Toolbox (11”x11”x25”) mounted to Frame


• Turntable Safety Interlock with Warning Light & Buzzer

Power Unit:

• Tier IV Final Diesel Engine


• 120 Gal. Diesel Fuel Tank Capacity


• Dry Type Air Cleaner


• Fuel Level Site Gauge on Tank


• Fuel Gauge in Cab


• High Temperature- Low Oil Pressure Warning


• Engine De-Rate and Warning System in Cab


• Murphy Engine System Display


• Standard Murphy Instrumentation including Engine Oil Pressure, Coolant Temperature, Hour Meter, Tachometer, Voltmeter

• Remote Engine Oil Drain


• Remote Fluid Drains - Color Coded

Propulsion System:

• 4 Wheel Hydraulic Motor driven Axle, Chain & Sprocket Propulsion Drive


• Travel Speeds Variable up to 25 MPH


• Solid Pillow Block Bearing Supported Axles (FYH standard bearing-see upgrade option)


• Insulated Axles with Shunting Option


• 16" Diameter, Hub Mounted, Cast Steel Wheels


• Cobra Style Brake Shoes


• Parking Brake - Spring Applied - Hydraulic Release Brakes


• Travel Alarm - Switchable for Direction of Travel

Lighting & Electrical:

• 24 VDC, Circuit Breaker Protected, Electrical System


• PLC Electrical Control System


• Two Each Grote LED Travel Lights, Front & Rear


• Two Each Grote LED Work Lights over Each Rail


• Two Each LED Red Marker/Brake Lights, Front & Rear


• Amber Strobe


• Master Disconnect Switch beside Battery Box

Cabin:

• Semi-Enclosed Cab, Top of roof painted white


• Engine Driven Air Conditioner & Heater (Red Dot)


• 3 Speed Fan in Heater


• 4 Operator and Defrost Bi-directional Fans


• Tinted Lexan Windows, Safety Glass where equipped with wipers


• Windshield Wipers - 2 Forward and 2 Reverse


• Hydraulic Reservoir Temperature Gauge in Cab


• Electric Trumpet Horns


• Log Book/Manual box - 12" x 13" x 4"


• Adjustable, Mechanical Operator's Seats w/ Seat Belts


• Seating for two Spike Gun Operators and one Feed Tray Operator


• West Coast Type Mirrors


• 12V, 20 AMP MOW Radio Circuit


• International Control Symbols


• 3 Red Emergency Stop Buttons


• 2 each 5# ABC Fire Extinguisher


• First Aid Kit


• "Danger Live Track" Retractable Belt

Hydraulics:

• 110 Gallon Hydraulic Tank Capacity


• Single Pressure Compensated Hydraulic Pump 2500 psi


• Steel Manifold


• Electrical Control Valves


• Pressure & Return Line Filtration


• Joystick Type Hydraulic Operator Controls


• Cab Controlled Locks on Workhead Cylinders


• Lockable Suction Strainer 90 micron


• Filtered Manual Hydraulic Tank Fill System


• Electric Emergency Hydraulic Pump


• Thermostatically Controlled Oil Cooler


• 1" Quick Disconnect Filtration Loop Fittings

Spike Driving Equipment:

• Reciprocating Hammer Driving Action


• Remote, Electric Spike Pattern Adjustment


• Digital, Variable Roller Gauger


• Insulated Gauger


• Automatic Tie Nipper


• Boom & Winch for loading spike kegs


• Hook Style Deflector Mat

General:

• Installation of Customer Supplied Decals and 4” DOT Reflective Tape


• Scissor Lockout-Tagout


• Lockable Battery Disconnect Switch


• Two Printed and One USB Electronic Maintenance, Operation and Parts Manuals w/recommended spare parts list


• 6 Month, 1000 Hours, First to Occur, Standard Warranty


• Delivery & Setup at McAlester Army Ammunition Plant, McAlester, OK

Weights & Dimensions:

• Estimated Shipping/Operating Weight 30,000 lbs.


• Est. Length 25' 8"


• Est. Width 8' 6"


• Est. Height 9' 10"

Additional Optional Equipment:

General:

• Back-Up Alarm, Switchable for Direction of Travel


• Extra Parts/Operation/Maintenance Manual Box


• Rail Sweeps (Ahead of front/behind rear wheels) - Vertical Rubber Flap


• Two Additional Keyhole Tiedowns (Front & Rear)


• Corner Mounted Machine Jackstands

CAB:

• 12V, 20 AMP MOW Radio Circuit


• 3/5 Second Timer Backup Alarm


• Cab Filtered Air Pressurizer


• Dedicated Cab Fan for Operator


• Interior Cab Lights LED


• Low Hydraulic Oil - High Hydraulic Oil Temp Alarm


• Pressure Gauge for System Hydraulic Circuit in Cab

CX SPIKER UPGRADES:

• "HD" Anvil Upgrade

Lighting:

• All lights turn ON with Battery Switch


• UPGRADE Perimeter Lighting to GROTE LED


• Upgrade Work Light to Grote LED

Maintenance:

• Extra Parts/Operation/Maintenance Manuals (2)


• Fuel Level Site Gauge on Tank with Cage


• Lockable Battery Switch

SPIKER:

• Spiker Spare Parts Package

Purchase Description – CLIN003

2024 Nordco SS Small Spiker or equivalent

Model:

• Nordco Model SS-C Spiking Machine or equivalent


• For operation on standard 56.5" gauge track


• Machine must be new and unused, not reconditioned

Chassis:

• Heavy Duty Welded Steel Frame


• Lifting Bail for Lifting Machine


• Positive Locking Turntable w/ Aluminum Base


• 12" Standard Bumpers Included


• Keyhole Tie downs


• Mitten Style Standard Tow hitch


• Tool Box

Power Unit:

• Diesel Engine Tier IV Final


• High Temperature- Low Oil Pressure Shut-Down System


• 35 Gal. Diesel Fuel Capacity


• Fuel Level Site Gauge on Tank


• Engine Oil Drain


• Fluid Drains - Fuel Tank and Hydraulic Filter Loop


• Murphy Engine System Display


• Electric Start with Neutral Start Feature


• Engine De-Rate and Warning System in Cab


• High Temperature- Low Oil Pressure Warning

Propulsion System:

• 4 Wheel, Dual Axle Hydraulic Motor, Chain & Sprocket Propulsion Drive


• Solid Pillow Block Bearing Supported Axles - Rexnord


• Insulated Axles with Shunting Options


• 16" Diameter, Hub Mounted, Cast Steel Wheels


• Cobra Style Brake Shoes


• Spring Applied - Hydraulic Release Brakes

Lighting & Electrical:

• 12 VDC, Circuit Breaker Protected, Electrical System


• Two Each GROTE LED Travel Lights, Front & Rear


• Two Each GROTE LED Work Lights over Each Rail


• Two Each LED Red Marker/Brake Lights, Front & Rear


• Amber Strobe


• Back-Up Alarm- Switchable for Direction of Travel

Cabin:

• Canopy Roof, roof top painted white


• Electric Horns

• Log Book/Manual box


• Adjustable, Operator's Seats w/ Seat Belts


• West Coast Type Mirrors


• Standard Instrumentation including Engine Oil Pressure, Coolant Temperature, Hour Meter, Tachometer & Voltmeter


• Engine Warning Lights


• Hydraulic Reservoir Temperature Gauge in Cab


• International Control Symbols


• 1 Red Emergency Stop Button


• 5# ABC Fire Extinguisher


• First Aid Kit

Hydraulics:

• Single Pressure Compensated Hydraulic Pump 2500 psi


• Steel Manifold


• Electrical Control Valves


• Pressure & Return Line Filtration


• Filtered Manual Hydraulic Tank Fill System


• Electric Emergency Hydraulic Pump


• Thermostatically Controlled Oil Cooler


• Lockable Suction Strainer 90 micron


• 1" Quick Disconnect Filtration Loop Fittings

Spike Driving Equipment:

• Reciprocating Hammer Driving Action


• Remote, Hydraulic Spike Pattern Adjustment


• Tie Nipper


• Hydraulic Gauging Attachment


• Boom & Winch for loading spike kegs

General:

• "Danger Live Track" Retractable Belt


• Installation of Customer Supplied Decals and 4” DOT Reflective Tape


• Scissor Lockout-Tagout


• Lockable Battery Disconnect Switch


• Two Printed and One USB Electronic Maintenance, Operation and Parts Manuals w/recommended spare parts list


• 6 Month, 1000 Hours, First to Occur, Standard Warranty


• Delivery & Setup at McAlester Army Ammunition Plant, McAlester, OK

Weights & Dimensions:

• Estimated Shipping/Operating Weight 16,500 lbs. - 17,700 lbs. w/Gauger


• Est. Length 19' - 6"


• Est. Width 8' - 6"

• Est. Height 9' - 2"

Additional Optional Equipment:

General:

• Extra Parts/Operation/Maintenance Manual Box

CAB:

• 12V, 20 AMP MOW Radio Circuit


• 3/5 Second Timer Backup Alarm

Maintenance:

• Extra Parts/Operation/Maintenance Manuals (2)

SPIKER:

• Spiker Spare Parts Package

Purchase Description – CLIN 0004

2024 Nordco Spike Puller SP2R Dual Rail Spike Puller or equivalent

Model:

• Nordco Model SP2R Tier IV, Dual Rail Spike Puller or equivalent


• For operation on standard 56.5" gauge track


• Machine must be new and unused, not reconditioned

Chassis:

• Heavy Duty Welded Steel Frame


• Rear Floating Frame


• Federal Yellow Paint Spec No. 535C-13538 Standard Paint


• Lifting Bail for Lifting Machine


• Positive Locking Turntable with Rail-to-Rail Base


• Standard Rubber Bumper


• 8 Keyhole Tiedowns


• Mitten Style Standard Tow hitch


• Turntable Safety Interlock with Warning Light & Buzzer

Power Unit:

• Cummins Tier IV 110HP Diesel Engine


• 2 Diesel Fuel Tanks- 42 and 48-Gallon Fuel Capacity


• Dry Type Air Cleaner


• Fuel Level Site Gauge on Tank


• Murphy Engine System Display


• Engine High Temperature- Low Oil Pressure Warning


• Engine De-Rate and Warning System in Cab


• Standard Instrumentation including Coolant Temperature, Hour Meter, Tachometer and Voltmeter


• Remote Lockable Engine Oil Drain


• Engine Oil Placard in Cab-Brand, Type and Quantity Including Filter


• Remote Lockable Fluid Drains - Color Coded


• Lockable Engine Doors

Propulsion System:

• 4-Wheel, Dual Axle, Hydraulic Motor, Chain & Sprocket Drive


• Solid Pillow Block Bearing Supported 3" Demountable Axles (FYH standard bearing-see upgrade option)


• Insulated Axles with Shunting Option


• 16" Diameter, Hub Mounted, Cast Steel Wheels


• Cobra Style Brake Shoes


• Parking Brake - Spring Applied - Hydraulic Release


• Travel Alarm - Switchable for Direction of Travel

Lighting & Electrical:

• 24 VDC, Circuit Breaker Protected, Electrical System


• Electrical Control System


• Two Each 4x6 Grote LED Travel Lights, Front & Rear


• Two Each 4x6 Grote LED Work Lights over Each Rail


• Two Each Trucklite Red Marker/Brake Lights, Front & Rear


• Amber Strobe


• Master Disconnect Switch beside Battery Box


• LED Light in Electric Cabinet

Cabin:

• Two Man, Fabricated Steel Cab, Roof Painted White


• Engine Driven Air Conditioner & Heater (Red Dot)


• 3 Speed Fan in Heater


• 2 Operator and Defrost Bi-directional Fans


• All windows Safety Glass


• Windshield Wipers - Forward and Reverse & Work Viewing Area


• Sliding Side Windows


• Hydraulic Reservoir Temperature Gauge in Cab


• Hydraulic Oil Temp Gauge


• Fuel Level Gauge


• Electric Trumpet Horns


• Log Book/Manual Storage


• Adjustable, Mechanical Operator's Seats w/ Seat Belts


• West Coast Type Mirrors


• 12V, 20 AMP MOW Radio Circuit


• International Control Symbols


• 1 Red Emergency Stop Button


• 5# ABC Fire Extinguisher


• First Aid Kit


• Window Tint All

Hydraulics:

• 97 Gallon Hydraulic Tank


• Single Pressure Compensated Hydraulic Pump 2500 psi


• Steel Manifold


• Electrical Control Valves


• Pressure & Return Line Filtration


• Joystick Type Hydraulic Operator Controls


• Lockable Suction Strainer 90 micron


• Filtered Manual Hydraulic Tank Fill System


• Electric Emergency Hydraulic Pump


• Thermostatically Controlled Oil Cooler


• 1" Quick Disconnect Filtration Loop Fittings

Spike Removal Equipment:

• "A" Frame Pulling Assembly Over Each Rail


• Improved Fore/Aft Guide Rod and Bushing System


• Claw Type Pulling Tools Pulls Spikes Straight for Re-Use


• Cab Controlled Hydraulic Work Head Locks

General:

• "Danger Live Track" Retractable Belt

• Installation of Customer Supplied Decals and 4” DOT Reflective Tape


• Scissor Lockout-Tagout


• Lockable Battery Disconnect Switch


• Two Printed and One USB Electronic Maintenance, Operation and Parts Manuals w/recommended spare parts list


• 6 Month, 1000 Hours, First to Occur, Standard Warranty


• Delivery & Setup at McAlester Army Ammunition Plant, McAlester, OK

Approximate Weights & Dimensions:

• Est. Shipping Weight 19,700 lbs.


• Est. Length 22' 6"


• Est. Width 8' 6"


• Est. Height 10' 2"

Additional Optional Equipment:

General:

• Rail Sweeps (Ahead of front/behind rear wheels) - Vertical Rubber Flap


• Two Additional Keyhole Tiedowns (Front & Rear)

CAB:

• 3/5 Second Timer Backup Alarm


• Cab Filtered Air Pressurizer


• Low Hydraulic Oil - High Hydraulic Oil Temp Alarm


• Pressure Gauge for System Hydraulic Circuit in Cab


• Suspension Seat Upgrade

Lighting:

• All lights turn ON with Battery Switch

Maintenance:

• Extra Parts/Operation/Maintenance Manuals (2)

SP2R Spare Parts Package

Attachments/Links