USCGC Walnut Brake Band and Brake Band Assemblies

Active

Contract Opportunity

This is being posted for informational purposes only. This has been award Sole Source.

SCOPE OF WORK

U. S. COAST GUARD CUTTER WALNUT

APPLETON MARINE PARTS

SECTION 1 – GENERAL INFORMATION

1.1 Scope of Work

1.1.1 Background: During anchoring evolution crew discovered both port and starboard anchor ground tackle handwheel & brake band assemblies to be badly corroded and rusted. The port handwheel assembly is no longer operational and crew is limited to use of the starboard side only. The starboard side is also close to failure, but crew has been able to keep it greased and operational.

1.1.1.1 Intent is to procure and ship two new handwheel brake stand and brake band assemblies to cutter’s homeport. Coast Guard currently has the drive shaft assemblies in stock, so the request does not include these. Coast Guard is requesting two drive shaft assemblies as per Section 2 of this document.

The contractor must provide all materials/supplies defined in this Scope of Work.

1.1.2 Place of Delivery:

1.1.2.1 Unit: USCGC WALNUT

Location: 211 South Ave Ste C.

Pensacola, FL 32508

1.1.3 Contracting Officer (KO):

1.1.3.1 Name:

Unit: SFLC CPD2-SAP

PH:

E-mail:

1.1.4 Contracting Officers’ Technical Representative:

1.1.4.1 Name: CWO JOSEPH HARRIS

Unit: SFLC IBCTPL

PH: 410-564-6996

E-mail: JOSEPH.G.HARRIS@USCG.MIL

1.1.5 Contact for questions:

1.1.5.1 Any questions regarding scope of work must be directed to the Contracting Officer.

1.2 REMOVED

1.3 Delivery

1.3.1 FOB: Destination. Combined delivery, ship all items together. Deliver items to the delivery address in 1.1.2 of this document within 365 days of contract award.

1.4 Award

It is the governments’ intent to make award on the basis of Lowest Price Technically Acceptable (LPTA) offered through issuance of a firm fixed price contract.

1.4.1. Under FAR 4.1103 prospective contractor shall be registered in System Award Management (SAM) prior to award. Failure for contractor to be registered in (SAM) shall result in Contracting Officer to proceed with next successful registered offeror. Website: www.sam.gov

SECTION 2 – SPECIFIC TASKS:

The contractor must provide all materials listed below from Appleton marine as OEM parts for repair of walnuts anchor windless capstans.

2 (each) YMD-5611 TRUNNION SEAL

2 (each) YMD-5588 SEAL

2 (each) MMD-1253 RETAINER

8 (each) WMD-2532 SHIMS

12 (each) HHCS .75-10NC X 2.25" LG, GRADE 8 ZP

12 (each) SAE HARDEND FLATWASHER .75 DIA STL ZP

2 (each) MMD-1300 RETAINER

2 (each) TW111-2 BEARING LOCKWASHER TIMKEN

2 (each) TN-11 BEARING LOCK NUT TIMKEN

2 (each) YMD-5600 THRUST BEARING

24 (each) HHCS .50-13NC X 1.25" LG, GRADE 5 STL ZP

24 (each) FLATWASER .50 DIA, STEEL ZP

2 (each) JMD-1026 TRUNNION

Attachments/Links