USCGC Healy Crane Smart Equipment

Active

Contract Opportunity

THIS SOLICITATION IS POSTED FOR INFORMATIONAL PURPOSES ONLY THIS HAS BEEN AWARD VIA JOTFOC

Statement of Work

Crane Smart Equipment

USCGC Healy

1. GENERAL

1.1 Background

The Coast Guard is seeking to procure 03 Dual winch and 02 Main winch Crane Smart Load Management Interface (LMI) kits to replace the existing and outdated LMI system and install the new computer system and calibrate with a load test onboard USCGC Healy. The new LMI system shall integrate with the existing cranes.

1. 
   
   
   
   1. Scope
   
   
   
   

The contractor shall provide the brand name Crane Smart components:

1. QTY: 05 Color-touch screen display panel, with audible and visual alarms at panel, dedicated output for solenoid valve(s) [if installed on crane], mag mount antenna, mounting bracket, and power cable. P/N: 9005-0013


2. QTY: 05 Main winch anti-2-block switch, counterweight, chain, and mounting hardware. P/N: 9012-0000


3. QTY: 03 Boom angle transmitter with cable reel boom length system. P/N: 900-1085B


4. QTY: 03 Main winch load cell for 7/8” wire rope. P/N: 9004-0020


5. QTY: 02 Main winch load cell for ½” – ¾” wire rope. P/N: 9004-3010


6. QTY: 02 Main boom angle transmitters with the pre-programming of load charts. P/N: 900-1030. Shows length, radius, tip height and percentage of maximum load (LMI-LAT).


7. QTY: 03 Auxiliary winch load cell for ½” – ¾” wire rope. P/N: 9004-3011


8. QTY: 03 Auxiliary winch anti-2-block switches, counterweights, chains, and mounting hardware. P/N: 9012-0001


9. QTY: 02 Auxiliary boom angle transmitters with the pre-programming of load charts. P/N: 900-1031. Shows length, radius, tip height and percentage of maximum load (LMI-LAT)

1. REQUIREMENTS
   
   
   
   
   1. The below subassemblies that are required for each crane:
   
   
   
   

• STBD Aft Knuckle Crane:
  
  
  
  • P/N: 9005-0013, Color touch screen display panel with alarms with mounting hardware
  
  
  • P/N: 9004-0020, 7/8” Main Winch load cell
  
  
  • P/N: 9012-0000, Main winch anti-2-block switch, counterweight, chains, and mounting hardware
  
  
  • P/N: 900-1030, Main Boom angle transmitter with programed load chart
  
  
  • P/N: 9004-3011, ½”-3/4” Auxiliary winch load cell
  
  
  • P/N: 9012-0001, Auxiliary winch anti-2-block switch, counterweight, chains, and mounting hardware
  
  
  • P/N: 900-1030, Auxiliary Boom angle transmitter with programed load chart
  
  
  
  

• Port Aft Knuckle Crane:
  
  
  
  • P/N: 9005-0013, Color touch screen display panel with alarms with mounting hardware
  
  
  • P/N: 9004-0020, 7/8” Main Winch load cell
  
  
  • P/N: 9012-0000, Main winch anti-2-block switch, counterweight, chains, and mounting hardware
  
  
  • P/N: 9004-3011, ½”-3/4” Auxiliary winch load cell
  
  
  • P/N: 9012-0001, Auxiliary winch anti-2-block switch, counterweight, chains, and mounting hardware
  
  
  • P/N: 900-1030, Boom angle transmitter with programed load chart
  
  
  
  

• Port 04 Deck Crane:
  
  
  
  • P/N: 9005-0013, Color touch screen display panel with alarms with mounting hardware
  
  
  • P/N: 9004-0020, 7/8” Main Winch load cell
  
  
  • P/N: 9012-0000, Main winch anti-2-block switch, counterweight, chains, and mounting hardware
  
  
  • P/N: 9004-3011, ½”-3/4” Auxiliary winch load cell
  
  
  • P/N: 9012-0001, Auxiliary winch anti-2-block switch, counterweight, chains, and mounting hardware
  
  
  • P/N: 900-1085B, boom angle transmitter with programed load chart
  
  
  
  

• STBD 04 Deck Crane:
  
  
  
  • P/N: 9005-0013, Color touch screen display panel with alarms with mounting hardware
  
  
  • P/N: 9004-0020, 7/8” Main Winch load cell
  
  
  • P/N: 9012-0000, Main winch anti-2-block switch, counterweight, chains, and mounting hardware
  
  
  • P/N: 9004-3011, ½”-3/4” Auxiliary winch load cell
  
  
  • P/N: 9012-0001, Auxiliary winch anti-2-block switch, counterweight, chains, and mounting hardware
  
  
  • P/N: 900-1085B, boom angle transmitter with programed load chart
  
  
  
  

• Bow Crane
  
  
  
  • P/N: 9005-0013, Color touch screen display panel with alarms with mounting hardware
  
  
  • P/N: 9004-0020, 7/8” Main Winch load cell
  
  
  • P/N: 9012-0000, Main winch anti-2-block switch, counterweight, chains, and mounting hardware
  
  
  • P/N: 900-1085B, boom angle transmitter with programed load chart
  
  
  
  

2.5 Delivery Location

Deliver to:

USCG Base Seattle

ATTN: USCGC Healy

1519 Alaskan Way S

Seattle, WA 98134

2.6 References

N/A

2.7 Submittals and Approvals

For any questions regarding this scope of work please contact: Igor Guerrero at igor.guerrero@uscg.mil

3. PERIOD OF PERFORMANCE

The period of performance is ninety (90) calendar days from date of contract award.

Attachments/Links