KITCHEN REMODEL

Location:	Georgia
Posted:	May 11, 2026
Due:	May 15, 2026
Agency:	City of College Park
Type of Government:	State & Local
Category:	73 - Food Preparation and Serving Equipment
Solicitation No:	26-54
Publication URL:	To access bid details, please log in.

Attachment Preview

CITY OF COLLEGE PARK Contracts and Procurement Department

Attention: Carl Hall, Purchasing Department

3667 Main Street. City Hall

College Park, Georgia 30337

Email: Carlton.Hall@collegeparkga.gov Phone: (404)-767-1537ext. 1500

RE: REQUEST FOR QUOTE NO. 26-54

KITCHEN REMODEL-FIRE DEPARTMENT

OBJECTIVE

PURPOSE

The City is seeking quotes from qualified vendors to provide kitchen renovation services, including

demolition, repairs, modifications, and installation of new fixtures, cabinetry, countertops, appliances,

flooring, and related improvements. The project aims to enhance functionality, improve efficiency,

modernize the appearance of the space, and ensure the kitchen meets current operational, safety, and

facility standards while minimizing disruption to ongoing operations

MINIMUM QUALIFICATIONS & GENERAL REQUIREMENTS

The contractor must be properly licensed and insured and experience with similar office or

government facility renovations. The contractor shall comply with all applicable federal, state, and

local codes and safety standards, including OSHA. The contractor must be able to work in an

occupied facility, coordinate with staff to minimize disruption, and manage project schedules to

ensure timely completion. Responsibilities also include obtaining required permits, maintaining a

safe and clean worksite, and properly handling and relocating existing furniture and equipment as

directed.

SCOPE of SERVICE

. 1. Cabinetry Supply and Installation

Contractor shall furnish and install a complete Slim Shaker-style kitchen cabinet package,

including all base, wall, specialty, and tall pantry cabinetry as specified below:

• 36" Lazy Susan base cabinet (1)

• 33" Lazy Susan base cabinet (1)

• 36" sink base cabinet (1)

• 36" single drawer / 2-door base cabinet (2)

• 12" three-drawer base cabinet (1)

• 33" three-drawer base cabinet (1)

• 36" three-drawer base cabinet (1)

• 21" three-drawer 650 base cabinet (1)

• 36" two-door base cabinet (1)

• 15" trash can base cabinet (2)

• 24" x 36" corner wall cabinet (1)

• 36" x 36" two-door wall cabinets (5)

• 15" x 36" open shelf wall cabinets (2)

• 18" x 36" glass-front wall cabinets (2)

• 24" x 96" pantry cabinet (1)

All cabinetry shall include proper installation, leveling, securing, and alignment per manufacturer

specifications.

Trim, Molding, and Finish Carpentry

Provide and install all necessary finish materials, including:

• 25 linear feet of base molding

• 25 linear feet of crown molding

• 6" x 96" filler board (1)

• 3" x 36" filler boards (3)

• 3" x 30" filler boards (3)

• 3" x 96" light rail molding (4)

All trim shall be installed to ensure a finished, seamless appearance consistent with cabinetry

design.

Countertops

• Provide and install custom L-shaped stainless steel countertop, fabricated to field

measurements and installed with proper support and sealing.

Plumbing Allowance

• Faucet allowance included for selection and installation of standard kitchen faucet

assembly.

Tile Work and Flooring Preparation Materials

Contractor shall furnish all materials and labor required for tile installation, including:

• Porcelain tile allowance (material only)

• 50 lb bags of thinset mortar

• 25 lb bags of grout

• Tile leveling system packs (3)

• SDS scaling chisel bit (3) for surface preparation as needed

• Pre-taped plastic roll for protection/masking

• Painter’s tape (1 roll)

• Tile installation accessories as required for proper installation

Fasteners and Construction Materials

Provide all miscellaneous construction fasteners and adhesives necessary for installation, including:

• 1 box (75 count) Tapcon screws

• 1 box (300 count) GRK trim head screws

• Caulk tubes (3)

• Cabinet touch-up kits (3)

• 12-inch masking paper rolls (2)

Painting and Finishing Materials

• Provide two (2) 1-gallon buckets of paint for touch-up and finish work as required.

General Requirements

• All work shall comply with applicable building codes and manufacturer installation

requirements.

• Contractor is responsible for field verification of all measurements prior to fabrication.

• Installation shall include cleanup and removal of construction debris upon completion.

• All cabinetry, trim, and finishes shall be installed plumb, level, and securely fastened.

•

• Ensure all electrical systems remain operational; modify outlets if needed to support new

layout.

INSURANCE REQUIREMENTS

Within ten (10) days of Notice of Award, and at all times that this contract is in force, the

contractor shall obtain, maintain, and furnish the City of College Park, Certificates of

Insurance from licensed companies doing business in the State of Georgia and acceptable to

the City of College Park covering:

Worker’s Compensation

In accordance with O.C.G.A. Title 34, Chapter 9, as

amended

Business Auto Policy

Not less than $500,000.00

Commercial General

Liability

Minimum $1,000,000.00/claim

$2,000,000.00/occurrence for Personal Injury, Bodily

Injury, and Property Damage Liability

Professional Liability

Not less than $1,000,000.00/occurrence

Copies of these Certificates of Insurance shall be furnished to the City of College Park prior to

execution of the contract. Such policies shall be non-cancellable except on a thirty-day (30)

written notice to the City of College Park.

1. The CITY OF COLLEGE PARK (and any applicable Authority) will be shown as an

additional insured on General Liability, Auto Liability, and Professional Liability

policies and noted accordingly on the Certificate of Insurance.

2. The cancellation provision should provide 30 days’ notice of cancellation.

3. Certificate Holder shall read:

City of College Park, Ga.

3667 Main Street

College Park, Ga. 30337

This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.

Bid Number:	26-54
Bid Title:	KITCHEN REMODEL
Category:	CP - Training
Status:	Open

KITCHEN REMODEL

Attachment Preview

See also