Gate valve

Active

Contract Opportunity

SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions.

The follow has been attached for you to complete and review:

1. (BAA) Buy American Act Certification


2. Representations & Certifications Rider


3. Confirm Attached SLAC terms are accepted: FP Commercial Supplies-Services T&Cs (August 2023)

Required item(s) listed below:

1. Qty:4 - HV Gate valve DN 100 (4"), Flange: ISO-F (compatible with ISO 1609 fig 1), body: stainless steel, drive: pneumatic actuator with position indicator without solenoid valve double acting. Option: body: with port; pos. B ISO-KF 40; seal material vacuum side EPDM; compressed air, connection: diameter of connection: 1/4"

1. Qty: 13 - HV Gate valve DN 100 (4"), Flange: ISO-F (compatible with ISO 1609 fig 1), body: stainless steel, drive : manual actuator with position indicator, option: product: seal material vacuum side EPDM.

Quote is for product only; no on-site services permitted.

Source selection will be based on Lowest Price and Technically Acceptable Method (LPTA).

Technical evaluation criteria are as follows:

1. Ability to meet the following specs:

HV gate valve DN 100 (4")

1. flange : ISO-F (compatible with ISO 1609 Fig.1)

1. body : Stainless steel

1. drive : Manual actuator with position indicator

1. Option: product: seal material vacuum side

1. EPDM

2.HV gate valve DN 100 (4")

flange : ISO-F (compatible with ISO 1609 Fig.1)

body : Stainless steel

drive : Pneumatic actuator with position indicator without solenoid valve double acting

Option: body: with port; pos. B ISO-KF 40; seal material vacuum side EPDM; compressed air

connection: diameter of connection 1/4"

3. Lead time of no more than 14 weeks.

Please provide a price and lead time quotation by COB 11/26/2024. (15 days)

Please be advised that the requirement was also posted on SAM.gov.

Send quote to AnthonyC@SLAC.stanford.edu.

The bid closing date for this requirement is 11/26/2024.

Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions?

If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted.

• Buy American Act Certification (BAA) applies to awards that are over $10,000.


• Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return.


• All subcontractors are required to register in the System for Award Management (www.sam.gov).


• The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) will be made a part of the resulting order.


• Payment Terms will be NET-30


• Freight terms will be FOB Destination Prepaid and Add

You are requested to mark and identify proprietary/confidential information provided in response to the solicitation.

Contact me directly with any questions.

Kind regards,

Anthony Chin

Procurement Commodities Team

anthonyc@slac.stanford.edu

SLAC National Accelerator Laboratory

2575 Sand Hill Road

Menlo Park, CA 94025

Attachments/Links