| Location: | Federal |
|---|---|
| Posted: | Nov 3, 2026 |
| Due: | Nov 12, 2026 |
| Agency: | U.S. Government Publishing Office |
| Type of Government: | State & Local |
| Category: |
|
| Publication URL: | To access bid details, please log in. |
Program/Jacket Number: 452-127
Title: 26-017 REGAF Recruiter 10ft Canopy Tent
Bid Opening Date: November 12, 2026
Contract Type: One-Time Bid
Scope: This specification is for the manufacturing, proofing, printing, packing, and shipping of canopy tents by the date specified.
Quantity: 894
Ship/Deliver Date: January 25, 2027
Files:
452127 Final with Attachments
Specifications by MV Jacket 452-127
Reviewed by JB Req: 6-52127
Page 1 of 9
BID OPENING: Bids shall be opened virtually at 11:00 AM, Eastern Time (ET), on November 12, 2026, at the
U.S. Government Publishing Office. All parties interested in attending the bid opening shall email bids@gpo.gov
one (1) hour prior to the bid opening date and time to request a Microsoft Teams live stream link. This must be a
separate email from the bid submission. The link will be emailed prior to the bid opening.
BID SUBMISSION: Bidders MUST submit email bids to bids@gpo.gov for this solicitation. No other method of
bid submission will be accepted at this time.
The Jacket number (452-127) and bid opening date (November 12, 2026) must be specified in the subject line of
the emailed bid submission. Bids received after the bid opening time/date specified above will not be considered
for award.
ISSUE DATE:
FOR ANY QU NEoSvTeImObNeSr 3B, E2F0O26R.E AWARD CONCERNING THESE SPECIFICATIONS, EMAIL Maxianne
V illalon at mvillalon@gpo.gov.
SPECIFICATIONS
U.S. Government Publishing Office (GPO)
Purchase Division
GPO CONTRACT TERMS: Any contract which results from this Invitation for Bid will be subject to the
applicable provisions, clauses, and supplemental specifications of GPO Contract Terms (GPO Publication 310.2,
effective December 1, 1987 (Rev. 01-18)) and GPO Contract Terms, Quality Assurance Through Attributes
Program for Printing and Binding (GPO Publication 310.1, effective May 1979 (Rev. 09-19)).
SUBCONTRACTING: The contractor may make contracts for the furnishing of all or any part of the supplies or
work specified. Accordingly, Contract Clause 6, "Subcontracts," of GPO Contract Terms (GPO Publication 310.2,
effective December 1, 1987 (Rev. 6 01)), does not apply to this procurement.
BUY AMERICAN ACT: In compliance with Contract Terms 310.2 (Rev. 01-18), the contractor must state within
the bid submitted either that the end product is a Domestic end product or a Foreign end product as defined in
Contract Clause 37 for the requested promotional item. The contractor shall indicate "product of unknown origin"
when it is unknown if the product offered is a domestic end product; in that instance, GPO will consider the bid as
a Foreign end product, in accordance with Contract Terms, Certifications C-2 (Buy American Certification), that
components of unknown origin have been considered to have been mined, produced, or manufactured outside the
United States.
PREDOMINANT PRODUCTION FUNCTION: The predominant production function is hereby waived.
Printing firms, manufacturers, dealers or brokers may submit offers for this solicitation.
PRODUCT: This specification is for the manufacturing, proofing, printing, packing, and shipping of canopy tents by
the date specified.
TITLE: 26-017 REGAF Recruiter 10ft Canopy Tent
WARRANTY: Contract Clause 15, "Warranty", of GPO Contract Terms (GPO Publication 310.2, effective
December 1, 1987 (Rev. 01-18)) is amended for the solicitation to the effect that the warranty period is EXTENDED
from 120 days to one (1) calendar year from the date the check is tendered as final payment. All other provisions
remain the same.
Jackets 452-127 Page 2 of 9
QUALITY LEVEL: 3 Quality Assurance Through Attributes (GPO PUB 310.1, effective May 1979 (Rev. 9-19))
applies.
QUANTITY: 894 tents.
TRIM SIZE: Tent: 10' X 10'. Graphic layout (per panel): approximately 60-1/4" x 44-1/2".
PAGES: See Printing.
PRINTING: The pop-up canopy tents must match the specifications of the Ace Displays Custom Canopy Tent Ace
Kit 1010-6 (see Attachment 1) and must include the following features:
* Tents must feature a canopy top and heavy duty aluminum frame, and come with a standard carrying case
* Tent Fabric: durable, weather-resistant, water-resistant 500 Denier polyester
* Assembled Tent Dimensions: approximately 120" W x 127" H x 120" D
* Case Dimensions: approximately 10" W x 63" H x 10" D
The tents shall be imprinted with a full bleed solid background plus color illustrations and white type matter and
line art on all four sides in Full-Color/Four-Color Process via Dye Sublimation. The overall graphic layout size is
approximately 60-1/4" x 44-1/2" per panel (including bleed). See Attachment 2.
To be considered for an award, the contractor is required to provide either a link to a website containing the item
description and a visual for the product they are quoting, or written specifications along with a visual for the product
they are quoting. Contractors unable to comply within two (2) hours of the written or verbal request from GPO may
not be considered for award.
GOVERNMENT TO FURNISH:
- A ZIP file containing Adobe Acrobat PDF files, an MS Excel Spreadsheet containing distribution addresses,
and the Purchase Order.
- NOTE: The print file will be available no later than November 17, 2026.
Electronic Media: Files supplied - Adobe PDFs created using Adobe InDesign CC, all fonts are embedded, all
bleeds are included, and graphics are linked.
Prior to image processing, the contractor shall perform a basic check (preflight) of the furnished media and
publishing files to assure correct output of the required reproduction image. Any errors, media damage or data
corruption that might interfere with proper file image processing must be reported to your contract administrator.
The contractor shall create/alter any necessary trapping, set proper screen angles and screen frequency, and define
file output selection for the imaging device being utilized. Furnished files must be imaged as necessary to meet the
assigned quality level. When required by the Government, the contractor shall make minor revisions to the
electronic files. Prior to making any revisions, the contractor shall copy the furnished files and make all changes to
the copy unless otherwise indicated.
ADDITIONAL INFORMATION:
- Contractor must have the ability to edit PDF files (when furnished by the Government).
- Contractor is not to request that electronic files provided be converted to a different format. If contractor
wishes to convert files to a different format, the final output must be of the same or higher quality and at
no additional cost to the Government.
- The contractor is cautioned that furnished fonts are the property of the Government and/or its originator.
All furnished fonts are to be eliminated from the contractor's archive immediately after completion of the
contract.
- Identification markings such as register marks, commercial identification marks of any kind, etc., except
Jackets 452-127 Page 3 of 9
form number and revision date, carried in the electronic files, must not print on the finished product.
- When PostScript Files are not furnished - prior to making revisions, the contractor shall copy the furnished
files and make all changes to the copy.
- Upon completion of this order, the contractor must furnish final production native application files (digital
deliverable) and one "press quality" PDF file with the furnished media. Storage media must be MAC/PC
compatible.
The digital deliverables must be an exact representation of the final product and shall be returned on the same type
of storage media as was originally furnished. The Government will not accept, as digital deliverables, PostScript
files, Adobe Acrobat Portable Document Format (PDF) files, or any proprietary file formats other than those
supplied, unless specified by the Government.
CONTRACTOR TO FURNISH: All materials and operations, other than those listed under "Government to
Furnish," necessary to produce the product(s) in accordance with these specifications.
STOCK/PAPER: N/A
INK: Full/Four-Color Process via Dye Sublimation.
MARGINS: Full bleeds.
PROOFS: Contractor to email an Adobe Acrobat PDF proof to adam.fey@us.af.mil and mvillalon@gpo.gov on or
before November 18, 2026.
Include GPO Jacket Number in the "Subject" line of all correspondence.
Contractor to submit one Press Quality PDF soft proof (for content only) using the same Raster Image Processor
(RIP) that will be used to produce the final printed product. PDF proof will be evaluated for text flow, image
position, and color breaks. Proof will not be used for color match.
The proof will be checked for quality and compliance with these specifications, approved or approved with
comments, and the contractor will be notified within ONE (1) working day after receipt. Approval or conditional
approval shall not relieve the contractor from complying with the specifications and all other terms and conditions
of the contract. A conditional approval shall state any further action required by the contractor. A notice of
disapproval shall state the reasons therefor.
NOTE: The day the email is sent is not the first workday of the schedule.
The contractor must not print prior to receipt of an "OK to print".
PRIOR-TO-PRODUCTION SAMPLES:
Within TEN (10) workdays of the PDF approval, prior to the commencement of production of the contract
production quantity, the contractor must provide ONE (1) prior-to-production sample to the address below. The
prior-to-production sample must be constructed as specified using the form, ink, equipment, and methods of
production which will be used in producing the finished product.
The Government will approve, conditionally approve, or disapprove the samples within FIVE (5) workdays of the
receipt thereof. Approval or conditional approval shall not relieve the contractor from complying with the
specifications and all other terms and conditions of the contract. A conditional approval shall state any further action
required by the contractor. A notice of disapproval shall state the reasons therefor.
If the samples are disapproved by the Government, the Government, at its option, may require the contractor to
submit additional samples for inspection and test, in the time and under the terms and conditions specified in the
Jackets 452-127 Page 4 of 9
notice of rejection. Such additional samples shall be furnished, and necessary changes made, at no additional cost
to the Government and with no extension in the shipping schedule. The Government will require the time specified
above to inspect and test any additional samples required.
In the event the additional samples are disapproved by the Government, the contractor shall be deemed to have
failed to make delivery within the meaning of the default clause in which event this contract shall be subject to
termination for default, provided however, that the failure of the Government to terminate the contract for default
in such event shall not relieve the contractor of the responsibility to deliver the contract quantities in accordance
with the shipping schedule.
In the event the Government fails to approve, conditionally approve, or disapprove the samples within the time
specified, the Contracting Officer shall automatically extend the shipping schedule in accordance with Contract
Clause 12, "Notice of Compliance With Schedules," of GPO Contract Terms (GPO Publication 310.2, effective
December 1, 1987 (Rev. 01-18)).
Manufacture of the final product prior to approval of the sample submitted is at the contractor's risk. Samples will
NOT be returned to the contractor. All costs, including the costs of all samples, shall be included in the contract
price for the production quantity.
All samples shall be manufactured at the facilities in which the contract production quantities are to be
manufactured. Prior to production samples will NOT be returned.
The prior-to-production samples must be delivered by the date specified above to the following addresses:
HQ AFRS/RSMA
Attn: Adam Fey (210-565-0524)
555 East Street West, Building 663 - Basement
JBSA-Randolph AFB, TX 78150-4527
-----one prior to production sample
If sample is to be returned, the contractor is directed to include a fully completed return airbill (prepaid by the
contractor), return bill of lading or similar document to be used by the agency for the return of the proofs. Cost of
transporting of proof and materials both ways is to be borne by the contractor. The contractor has the option of
using his/her own personnel to pick up and deliver the sample.
PACKING/LABELING: Pack tents suitably per box as destination quantities dictate. All shipping containers must
be labeled with carton labels using the format below. The contractor must complete and reproduce labels as
necessary. Shipping containers must not exceed 34 lbs. when fully packed.
Mark each box with:
A) 26-017 REGAF Recruiter 10ft Canopy Tent
B) REQUISITION 6-52127
C) PUBLICATION DATE: __________
D) QUANTITY: __________ PER BOX
PALLETIZING: All motor freight shipments require pallets. Palletize in accordance with GPO Pub. 310.2,
Contract Terms, revised January 2018.
Contractor must follow ALL packing/labeling/palletizing requirements. Any deviation in packing, labeling and/or
shipping requirements may be cause for rejection of order and the contractor will have 48 hours to correct any
deficiency. If not corrected in that time frame, the Government will correct at the contractor's expense.
The contractor shall furnish all packing materials and shipping containers and pack in such a manner as to provide
Jackets 452-127 Page 5 of 9
protection against all the normal hazards of cross-country transportation and warehouse storage. Shipping
containers must have a minimum bursting strength of 200 lbs. per square inch and must not exceed 34 lbs. after
being filled. 40" x 48", 4 stringer pallets with opening on the 40" side. Cartons must be stacked to form a stable
pallet and follow the list below:
- When possible, carton should only be stacked overlapping each other (bricklayer method) when individual
boxes and their contents form a tight unit
- Pyramid shaped pallet loads are a problem because the lack of a level surface weakens the overall packaging
and may expose the contents to damage from other shipments. Do not stack pallets in a pyramid fashion.
- Overhang - product must not overhang the pallet. Over-hanging product increases the risk of damage during
shipping and receiving.
- It is not acceptable to chimney stack pallets - product cannot be stacked around the edge of the pallet with
the middle left with empty space.
Shipping containers must be packed tightly (add stuffing when necessary and contents to be in firm contact top and
bottom of container to prevent shifting and crushing in shipping and storage operations. New paperboard or
corrugated pads will be inserted at top and bottom of each container to protect content. Containers will be sealed
with a water-resistant adhesive applied to the full area of contact between flaps. The preferred method is to seal the
carton using a water-resistant adhesive applied to the full area of contact between the flaps. When this method is
used, stitching will be done with steel staples or stitching wires not less than 0.017 inches thick and 0.098 inches
wide. The staple wire must be treated with coating or plating such as enamel or copper wash which is not readily
removable in the stapling or stitching or in shipping and storage operations. Containers are to be reinforced with 3-
inch-wide direction-gummed tape. Use two strips, one each over the top and bottom center seams of the carton with
ends extending over the carton end, not less than 2-1/2 inches in length.
SCHEDULE:
* Government furnished material will be available for pick up on or before November 17, 2026.
* Deliver all soft proofs (PDF) on or before November 18, 2026.
* Deliver all prior-to-production samples on or before December 2, 2026.
* Deliver all tents listed on Page 5 on or before January 25, 2027.
See Distribution for entire delivery schedule.
DISTRIBUTION: The contractor must notify the ordering agency on the same day that the product ships/delivers
via email sent to: adam.fey@us.af.mil, mvillalon@gpo.gov, and compliance@gpo.gov. The subject line of this
message shall be "Distribution Notice for Jacket 452-127, Req. 6-52127". The notice must provide all applicable
tracking numbers, shipping method, and Title. The contractor must be able to provide copies of all delivery, mailing,
and shipping receipts upon agency request.
All shipments must be made via traceable means.
All expenses incidental to picking up and returning materials, and furnishing samples must be borne by the
contractor. Also, refer to Articles 5 and 6, Supplemental Specifications, GPO Contract Terms, Publication 310.2,
revised January 2018.
DELIVER THE FOLLOWING F.O.B. DESTINATION on or before January 25, 2027:
Jacket 452-127, Req. 6-52127
----------------------------------------894 total tents to different locations (See Attachment 3: Distribution List)
NOTE: Approximately 80% of the delivery locations have a loading dock and approximately 20% require inside
delivery. At least 24 hours prior to each delivery, the contractor must call the point of contact for each shipment to
coordinate delivery and provide tracking information.
QUALITY ASSURANCE THROUGH ATTRIBUTES: The bidder agrees that any contract resulting from bidder's
offer under these specifications shall be subject to the terms and conditions of GPO Pub. 310.1 "Quality Assurance
Jackets 452-127 Page 6 of 9
Through Attributes - Contract Terms" in effect on the date of issuance of the invitation for bid.
All GPO publications referenced in these specifications are available on the internet via the GPO website.
LEVELS AND STANDARDS: The following levels and standards shall apply to these specifications: Product
Quality Levels:
(a) Printing (page related) Attributes - Level III
(b) Finishing (item related) Attributes - Level III
Inspection Levels (from ANSI/ASQC Z1.4):
(a) Non-destructive Tests - General Inspection Level I.
(b) Destructive Tests - Special Inspection Level S-2.
Specified Standards: The specified standards for the attributes requiring them shall be:
Attribute Specified Specified Standard
P-7 Type Quality and Uniformity Approved Preproduction Samples
P-10 Process Color Match Approved Preproduction Samples
NOTE: Prior to award, contractor may be required to provide information related to specific equipment that will be
used for production.
OFFERS: Offers must include the cost of all materials and operations for each item listed in accordance with these
specifications. In addition to a quantity for the price called for in these specifications, a price must also be submitted
for each additional tent at the same time as the initial order. The price for additional quantities must be exclusive of
all basic or preliminary costs.
BID SUBMISSION: Bidders MUST submit email bids to bids@gpo.gov for this solicitation. No other method of
bid submission will be accepted at this time.
The Jacket number 452-127 and bid opening date (November 12, 2026) must be specified in the subject line of the
emailed bid submission. Bids received after the bid opening time/date specified above will not be considered for
award.
NOTE: Bidders are to fill out, sign/initial, and return pages 8-9.
ADDITIONAL EMAILED BID SUBMISSION PROVISIONS: The Government will not be responsible for any
failure attributable to the transmission or receipt of the emailed bid including, but not limited to, the following:
1. Illegibility of bid.
2. Emails over 75 MB may not be received by GPO due to size limitations for receiving emails.
3. The bidder's email provider may have different size limitations for sending email; however, bidders are
advised not to exceed GPO's stated limit.
4. When the email bid is received by GPO, it will remain unopened until the specified bid opening time.
Government personnel will not validate receipt of the emailed bid prior to bid opening. GPO will use the
prevailing time (specified as the local time zone) and the exact time that the email is received by GPO's
email server as the official time stamp for bid receipt at the specified location.
PREAWARD SURVEY: In order to determine the responsibility of the prime contractor or any subcontractor, the
Government reserves the right to conduct an on-site preaward survey at the contractor's/subcontractor's facility or
to require other evidence of technical, production, managerial, financial, and similar abilities to perform, prior to
the award of a contract. As part of the financial determination, the contractor in line for award may be required to
provide one or more of the following financial documents:
1) Most recent profit and loss statement
2) Most recent balance sheet
Jackets 452-127 Page 7 of 9
3) Statement of cash flows
4) Current official bank statement
5) Current lines of credit (with amounts available)
6) Letter of commitment from paper supplier(s)
7) Letter of commitment from any subcontractor
The documents will be reviewed to validate that adequate financial resources are available to perform the contract
requirements. Documents submitted will be kept confidential and used only for the determination of responsibility
by the Government. Failure to provide the requested information in the time specified by the Government may
result in the Contracting Officer not having adequate information to reach an affirmative determination of
responsibility.
All GPO publications referenced in these specifications are available on the internet via the GPO website.
PAYMENT: Submitting invoices for payment via the GPO fax gateway (if no samples are required) utilizing the
GPO barcode coversheet program application is the most efficient method of invoicing. Instructions for using this
method can be found at the following web address:
http://winapps.access.gpo.gov/fms/vouchers/barcode/instructions.html
Invoices may also be mailed to: U.S. Government Publishing Office, Office of Financial Management, Attn:
Comptroller, Stop: FMCE, Washington, DC 20401.
NOTE: Contractors are expected to submit invoices within 30 days of job shipping/delivery.
For more information about the billing process refer to the General Information of the Office of Finance web page
located at https://www.gpo.gov/how-to-work-with-us/agency/billing-and-payment.
COMPLIANCE REPORTING: Contractors are to report information regarding each order for compliance
reporting purposes and include date of delivery (or shipment if applicable) for delivery schedules in accordance
with the contract requirements by emailing compliance@gpo.gov. Personnel receiving the email will be unable to
respond to questions of a technical nature.
Jackets 452-127 Page 8 of 9
CONTRACTOR NAME: _____________________________________________________________________
SHIPMENT(S): Shipments will be made from: City __________________________, State ________________
The city(ies) indicated above will be used for evaluation of transportation charges when shipment f.o.b. contractor's
city is specified. If no shipping point is indicated above, it will be deemed that the bidder has selected the city and
state shown below in the address block, and the bid will be evaluated, and the contract awarded on that basis. If
shipment is not made from evaluation point, the contractor will be responsible for any additional shipping costs
incurred.
Jacket: 452-127 (894 tents) Bid Price $ ________________
Additional rate per tent: $
_________
(Initials)
(COMPLETE AND SUBMIT THIS PAGE WITH YOUR BID)
Jackets 452-127 Page 9 of 9
DISCOUNTS: Discounts are offered for payment as follows: __________ Percent, _________calendar days.
See Article 12 "Discounts" of Solicitation Provisions in GPO Contract Terms (Publication 310.2).
BID ACCEPTANCE PERIOD: In compliance with the above, the undersigned agree, if this bid is accepted
within____________ calendar days (60 calendar days unless a different period is inserted by the bidder) from the
date for receipt of bids, to furnish the specified items at the price set opposite each item, delivered at the designated
points(s) in exact accordance with specifications.
NOTE: Failure to provide a 60-day bid acceptance period may result in expiration of the bid prior to award.
AMENDMENT(S): Bidder hereby acknowledges amendment(s) number(ed) ____________________________
BIDDER'S NAME AND SIGNATURE: Unless specific written exception is taken, the bidder, by signing and
submitting a bid, agrees with and accepts responsibility for all certifications and representations as required by the
solicitation and GPO Contract Terms - Publication 310.2. When responding by email, fill out and return one
completed copy of all applicable pages that include the Jacket Number, Bid Price, Additional Rate, Discounts,
Amendments, Bid Acceptance Period, and Bidder's Name and Signature, including signing where indicated.
Valid electronic signatures will be accepted in accordance with the Uniform Electronic Transactions Act, 2.
Electronic signatures must be verifiable of the person authorized by the company to sign bids.
Failure to sign the signature block below may result in the bid being declared non-responsive.
Bidder ___________________________________________________________________________________
(Contractor Name) (GPO Contractor's Code)
__________________________________________________________________________________________
(Street Address)
___________________________________________________________________________________________
(City - State - Zip Code)
By _________________________________________________________________________________________
(Printed Name, Signature, and Title of Person Authorized to Sign this Bid) (Date)
___________________________________________________________________________________________
(Person to be Contacted) (Telephone Number) (Email)
*******************************************************************************************
THIS SECTION FOR GPO USE ONLY
Certified by: __________ Date:__________ Contracting Officer:__________ Date:___________
(Initials) (Initials)
(COMPLETE AND SUBMIT THIS PAGE WITH YOUR BID)
Attachment 1:
Product Reference
NOTE: While the reference below shows a back wall, the item requested does not need a back wall. The reference
below DOES NOT match what is to be printed on this product. For a print mock-up, see Attachment 2 (next page).

With GovernmentContracts, you can:
Follow 83--ARMY, BUCKLE, CLIPS, E Active Contract Opportunity Notice ID SPE1C127Q0097 Related Notice
DEPT OF DEFENSE
Bid Due: 12/04/2026
Follow 83--FASTENER TAPE,PILE Active Contract Opportunity Notice ID SPE1C127Q0173 Related Notice Department/Ind. Agency
DEPT OF DEFENSE
Bid Due: 11/19/2026
Follow RDS 150 TAN Active Contract Opportunity Notice ID 8340-01-540-9961 Related Notice Department/Ind.
DEPT OF DEFENSE
Bid Due: 12/01/2026
Follow 83--ARMY, BUCKLE, CLIPS, E Active Contract Opportunity Notice ID SPE1C127Q0030 Related Notice
DEPT OF DEFENSE
Bid Due: 11/20/2026