Purchase and Start-Up of Jet Nozzles
| Location: | Georgia |
|---|---|
| Posted: | Jun 9, 2026 |
| Due: | Jun 23, 2026 |
| Agency: | Gwinnett County |
| Type of Government: | State & Local |
| Category: |
|
| Solicitation No: | IWQ 131560 INV |
| Publication URL: | To access bid details, please log in. |
Purchase and Start-Up of Jet Nozzles
Buyer Contact : Anna.West@GwinnettCounty.com
Opening Date : 06/23/2026 03:00 PM EST
Attachment Preview
June 9, 2026
INFORMAL WRITTEN QUOTE
IWQ 131560
Gwinnett County is soliciting competitive informal written Quotes from qualified suppliers for the
Purchase and Start-Up of Jet Nozzles for the Department of Water Resources.
Quotes should be typed or submitted in ink and returned to the Attention of Anna West, Purchasing
Associate II. Quotes should be received by 5:00 P.M. June 23, 2026, by email at
Anna.West@GwinnettCounty.com or sent to the Gwinnett County Financial Services - Purchasing
Division – 2nd Floor, 75 Langley Drive, Lawrenceville, Georgia 30046.
Questions regarding quotes should be directed to Anna West, Purchasing Associate II at
Anna.West@GwinnettCounty.com or by calling 770-822-7862 by 5:00 P.M. June 16, 2026. Quotes
are legal and binding upon the vendor when submitted.
Successful contractors will be required to meet insurance requirements. The Insurance Company
should be authorized to do business in Georgia by the Georgia Insurance Department and must have
an A.M. Best rating of A-7 or higher.
Gwinnett County does not discriminate on the basis of disability in the admission or access to its
programs or activities. Any requests for reasonable accommodations required by individuals to fully
participate in any open meeting, program or activity of Gwinnett County Government should be
directed to the ADA Coordinator at the Gwinnett County Justice and Administration Center, 770-822-
8165.
The written quote documents supersede any verbal or written prior communications between the
parties.
Award will be made to the supplier submitting the lowest responsive and responsible quote.
Gwinnett County reserves the right to reject any or all quotes, to waive technicalities, and to make an
award deemed in its best interest. Quotes may be split or awarded in entirety. Gwinnett County
reserves the option to negotiate terms, conditions and pricing with the lowest responsive,
responsible vendor(s) at its discretion.
We look forward to your quote and appreciate your interest in Gwinnett County.
Anna West
Purchasing Associate II
The following pages should be returned with your quote: Quote Schedule, Page 2-3
References, Page 7
Contractor Affidavit and Agreement,
Page 13
IWQ 131560
Page 2
FAILURE TO RETURN THIS PAGE AS PART OF YOUR QUOTE DOCUMENT MAY RESULT IN REJECTION OF YOUR QUOTE.
QUOTE SCHEDULE
DELIVERY FOB DESTINATION FREIGHT PRE-PAID AND ALLOWED TO: Gwinnett County Dept. of Water Resources – Central Facility, 684 Winder Hwy, Lawrenceville 30045
Informal Written Quotations are being solicited from qualified suppliers for the following item. Informal Written Quotations may be returned by email at Anna.West@GwinnettCounty.com or
sent to the Gwinnett County Financial Services - Purchasing Division – 2nd Floor, 75 Langley Drive, Lawrenceville, Georgia 30046. If you have any questions, please contact Anna West,
(770) 822-7862 or email.
ITEM
#
QTY
UNIT
DESCRIPTION
MFG & NO.
DELIVERY A.R.O.
UNIT PRICE
TOTAL PRICE
1
4
EA
KEG Torpedo Nozzle, one inch, jetted to 65 gpm at
2,000 psi, per specifications or approved equivalent
2
4
EA
Aqua Power 700 Nozzle, one inch, jetted to 65 gpm at
2,000 psi, per specifications or approved equivalent
3
3
EA
Aqua Power 700 Nozzle, one inch, jetted to 80 gpm at
2,500 psi, per specifications or approved equivalent
4
4
EA
Twister Nozzle, one inch, jetted to 65 gpm at 2,000 psi,
per specifications or approved equivalent
5
3
EA
Twister Nozzle, one inch, jetted to 80 gpm at 2,500 psi,
per specifications or approved equivalent
6
4
EA
Twister Nozzle, ½ inch, jetted to 22 gpm at 2,000 psi,
per specifications or approved equivalent
7
1
EA
Twister Nozzle, ¾ inch, jetted to 45 gpm at 2,500 psi,
per specifications or approved equivalent
8
3
EA
O.M.G. Nozzle, one inch, jetted to 80 gpm at 2,500 psi,
per specifications or approved equivalent
9
3
EA
O.M.G. Nozzle, one inch, jetted to 80 gpm at 2,500 psi,
per specifications or approved equivalent
10
8
HR
Onsite Training, per specifications or approved
equivalent
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
OVERALL TOTAL $
Note:
1.
2.
3.
4.
The unit price MUST include ALL charges, including but not limited to Delivery and Start-Up.
Delivery MUST be made between 8:00 A.M. and 2:00 P.M., Monday – Friday, excluding holidays.
The use of brand name is not for restrictive purposes or to limit competition, but to assist vendors in determining the standard of quality Gwinnett County is
seeking. It is understood that items matching or exceeding the quality level are also acceptable. Gwinnett County shall be the sole determinant of
acceptability of all approved equivalents. It is the vendor’s responsibility to prove equivalent products match or exceed the quality level of the product(s)
specified. If product differs from description above, vendor must supply specifications/cut sheets for the product being quoted prior to award.
If you are quoting an equivalent to the specified items, please send specifications with your submittal.
IWQ 131560
Page 3
FAILURE TO RETURN THIS PAGE AS PART OF YOUR QUOTE DOCUMENT MAY RESULT IN REJECTION OF YOUR QUOTE.
QUOTE SCHEDULE
NOTE: Note: Effective, July 1, 2013 and in accordance with the Georgia Illegal Reform and Enforcement Act, an original signed, notarized and fully completed Contractor Affidavit and
Agreement should be included with your bid/proposal submittal, if the solicitation is for the physical performance of services for all labor or service contract(s) that exceed $2,499.99
(except for services performed by an individual who is licensed pursuant to Title 26, Title 43, or the State Bar of Georgia). Failure to provide the Contractor Affidavit and Agreement with your
informal quote submittal may result in the quote being deemed non-responsive and automatic rejection.
Certification of Non-Collusion in Quote Preparation
Signature
Date
In compliance with the attached specifications and requirements in the Instructions to Vendors, the undersigned offers and agrees, within ninety (90) days of the date of quote opening,
to furnish any or all of the items upon which prices are quoted, at the price set opposite each item, delivered to the designated point(s) within the time specified in the fee schedule. By
submission of this quote, I understand that Gwinnett County uses Electronic Payments for remittance of goods and services. Vendors should select their preferred method of electronic
payment upon notice of award. For more information on electronic payments, please refer to the Electronic Payment information in the instructions to vendors.
Legal Business Name
Address
Does your company currently have a location within Gwinnett County? Yes No
Representative Signature
Printed Name
Telephone Number
Fax Number
Email Address
Contact Person (if someone other than the authorized representative listed above)
Telephone Number
Fax Number
E-Mail Address
IWQ 131560
Page 4
SPECIFICATIONS
KEG Torpedo Nozzles or Approved Equivalent
Those nozzles designed for sewer cleaning applications should meet the following standards and applications:
• Nozzle must have 8 rear facing jet inserts for all around cleaning and no forward-facing jets.
• Torpedo nozzles or like kind should have inserts with angles of incidence of 12° and 18°, should be made
of 300 series hardened stainless steel,
• Torpedo nozzle should be designed to clean 6 -inch lines to 18-inch lines
• Should be suitable for removal of sand, mud, sludge, brick, or other debris found in sewer or storm drain
lines,
• Threaded hose connections should be to NPT specifications
• Should be available with titanium ceramic inserts as an option
• Should be equipped with titanium ceramic insert option
• Should have available as an option verifiable patented fluid mechanics efficiencies that must meet ninety
percent plus (95%+) and be equivalent to KEG Torpedo US Patent # US 6.089.243,
• Titanium ceramic insert option should increase the manufacturer’s warranty to three years on the nozzle
and five years on inserts.
• Units provided should be equivalent to those cleaning type nozzles manufactured by KEG gmbH, of
Burgstadt, Saxony, Federal Republic of Germany, and distributed by KEG Technologies, Inc., of,
Spartanburg, South Carolina or approved equal.
Aqua Power 700 Nozzles or Approved Equivalent
• Controlled speed rotation/direction cleaning should be achieved by utilizing CENTRIFUGL CLUTCHES
• Body should be made of 300 series stainless steel
• The Head should have the following inserts
• Forward facing jet at an angle of 15-degree Jet oscillating by head rotating Used for opening blockages
• Inserts for cleaning Manholes in the front of nozzle head at 80 degrees 1 of these should be used in
cleaning and root cutting the other 2 jets should be plugged
• Nozzle should have 2 jets at 90 degrees for rotational cleaning
• Nozzle should have 2 jets at 100 degrees towards rear of nozzle for additional cleaning and cutting.
• Nozzle should have 4 inserts at the rear of the nozzle at 20 degrees for propulsion
• Nozzle should come 4 skids made of UHMW to make the nozzle slide smoother without scratching pipe
made of PVC and Lined Pipe.
• Should be available with titanium ceramic inserts as an option.
• Should be equipped with titanium ceramic insert option.
• Titanium ceramic insert option should increase the manufacturer’s warranty to three years on the nozzle
and five years on inserts.
• Nozzle should be able to clean and cut in pipe size 6 inch to 15 inch in basic set up
• Nozzle should be able to be adjusted to 24-inch pipe with expansion kit sold separately that skids should
made of UHMW
• All rotating parts should have a (2) two years warranty, inserts should have a (5) five years warranty
• Nozzle should have a weight of 22.5 lbs
• Nozzle width should be 5 inches without skids
• Nozzle width with skids should be 7 inches
• Nozzle should come with serial numbers for ease of tracking in the case of theft or loss
• Rotor mechanism spinning around a main shaft, water driven, and should not require lubrication of any
type for operation.
IWQ 131560
Page 5
• Units provided should be equivalent to those rotor type nozzles manufactured by KEG gmbH, of Burgstadt,
Saxony, Federal Republic of Germany, and distributed by KEG Technologies, Inc., of Spartanburg, South
Carolina, or approved equal.
Twister Nozzles or Approved Equivalent
• Nozzles Body should be made of 300 series Stainless Steel
• Nozzles should 4 inserts to the rear of nozzle for propulsion and removal of debris
• Nozzles should be able to be rebuilt in minutes with parts kit sold separately
• Nozzles should have 1 oscillating jet at 15 degrees
• Nozzles should be available with titanium ceramic inserts as an option
• Nozzles should be equipped with titanium insert option
• Titanium ceramic insert option should increase the manufacturer’s warranty to three years on the nozzle
and five years on inserts.
• Units provided should be the equivalent of those manufactured by KEG gmbH, of Burgstadt, Saxony,
Federal Republic of Germany, and distributed by KEG Technologies, Inc., of Spartanburg, South Carolina, or
approved equal.
KEG O.M.G Nozzles or Approved Equivalent
• Should be made of 300 series hardened stainless steel with the nose of the nozzle being comprised of
aircraft grade aluminum
• Should have available verifiable patented fluid mechanics with efficiencies of 98%
• Should be available with titanium ceramic inserts as an option
• Should be equipped with titanium ceramic insert option
• Titanium ceramic insert option should increase the manufacturer’s warranty to three years on the nozzle
and five years on inserts.
• Should have six rear facing jets at an angle of 8 degrees as well as an addition six rear facing jets at an
angle of 12 degrees with an optional forward-facing jet at 0 degrees.
• Should have dimensions of 18.25 inches x 4.25 inches and designed for such tasks as cleaning
deteriorated pipes and able to span existing holes in pipes of such condition
• Threaded hose connections should be to NPT specifications
• Units provided should be equivalent to those cleaning type nozzles manufactured by KEG gmbH, of
Burgstadt, Saxony, Federal Republic of Germany, and distributed by KEG Technologies, Inc., of,
Spartanburg, South Carolina or approved equal.
Traction Nozzles or Approved Equivalent
• Should be made of 300 series hardened stainless steel
• Should be available with titanium ceramic inserts as an option
• Should be equipped with titanium ceramic insert option
• Titanium ceramic insert option should increase the manufacturer’s warranty to three years on the nozzle
and five years on inserts.
• Should have six rear facing jets at alternating angles of 8 and 12 degrees with a forward-facing jet as an
option
• Should have available verifiable patented fluid mechanics with efficiencies of 80% or higher as a tier 3
nozzle
• Threaded hose connections should be to NPT specifications
• Should have a weight not to exceed 3.5 lbs
This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.
Daily notification on new contract opportunities
With GovernmentContracts, you can:
- Find more opportunities and win more business
- Receive daily alerts for all new bid opportunities
- Get contract opportunities matched to your business
See also
Follow 000HCCHD-2026-98161 B-Reader for Coal Workers' Health Surveillance Program Active Contract Opportunity Notice
HEALTH AND HUMAN SERVICES, DEPARTMENT OF
Bid Due: 7/09/2026
Follow Receive Microwave (And Associated Power Supplies) Active Contract Opportunity Notice ID FA8507_ReceiveMicrowave_SourcesSought
DEPT OF DEFENSE
Bid Due: 8/22/2026
Follow Notice of Intent to Award BPA Call Orders Against The Land Management
AGRICULTURE, DEPARTMENT OF
Bid Due: 7/08/2026
Follow Body Armor in Support of the National Oceanic and Atmospheric Administration (NOAA)
COMMERCE, DEPARTMENT OF
Bid Due: 7/01/2026
* Disclaimer: Information regarding bids, requests for proposals (RFPs), or requests for qualifications (RFQs) is provided on this website only for convenience and does not constitute official public notice. Persons wishing to respond to or inquire about bids, RFPs, or RFQs should contact the appropriate government department.