Organic Industrial Base (OIB) and Indirect Fires Munitions Industry Day

Active

Contract Opportunity

March 5, 2026

Note: This posting has been updated to include the following attachments: "Items Components Needed," "Installation Enablers," and "Revised JMC Installation Handbook."

Army Contracting Command – Rock Island (ACC-RI), on behalf of Portfolio Acquisition Executive Agile Sustainment and Ammunition (PAE AS&A) and Army Material Command (AMC) plans to hold an Organic Industrial Base (OIB) and Indirect Fires Munitions Industry Day on 19-20 March 2026 at the Hilton Parsippany located at One Hilton Court, Parsippany, NJ 07054. Registration for the event is now active and closes on 27 February 2026.

As indicated in the previous announcement, the intention of this Industry Day is to discuss opportunities available across the OIB for Public-Private-Partnerships (P3) and/or Co-Production at the Government Owned, Government Operated (GOGO) installations and Armament Retooling and Manufacturing Support (ARMS) Program at the Government Owned, Contractor Operated (GOCO) installations. The Government will also provide an overview of Enhanced Use Leases (EUL). The Government is seeking input from both traditional and non-traditional defense contractors in shaping the outlook for P3s, Co-Production and ARMS across the OIB. The Government plans to also highlight key areas where industry can address critical gaps and contribute to strengthening our capabilities. Additionally, Program Manager Combat Ammunitions System (PM CAS) will provide information on project planning for Mortar and Artillery Munition Development and Production Opportunities, including 60/81/120mm Mortar Cartridge and 105/155mm Projectile Load/Assemble/Pack (LAP), Metal Parts, Fuzes, Propellants, Primers, and associated materials.

General Session

The General Session will be 4 hours in length and cover both the OIB Industry Day opportunities and the Indirect Fires Munitions Industry Day information. A draft agenda is provided below. Please note, this is a draft agenda and the Government reserves the right to modify as required.

DAY 1: 19 MAR 2026

• 0715-0755 - Registration/Check-In


• 0800-0830 - Opening Comments & Government Introductions


• 0830-0845 - EUL Overview


• 0845-0900 - P3 Overview


• 0900-0945 - Site-by-site GOGO Overview


• Break


• 1000-1045 - GOCO Overview
  
  
  
  • GOCO MATOC Update
  
  
  • ARMS Overview
  
  
  • IAAAP Overview
  
  
  
  


• 1045-1145 - Mortar and Artillery Munition; Development and Production; Opportunities Execution


• 1145-1215 - Munitions Supply Chain Risk Management


• 1215-1300 - Break for Lunch


• 1300-1700 - One-on-One Meetings

DAY 2: 20 MAR 2026

• 0800-1200 - One-on-One Meetings

Participation in the General Session is limited to 4 individuals per company due to size capacity at the event. In the event registrations exceed the size capacity limitations, the Government may further limit the number of individuals per company. Registration confirmation will be coordinated through the POC identified in the form. A valid email address must be provided or the Government will be unable to contact you and confirm attendance.

Indirect Fires One-on-One Sessions

In the form, indicate your company’s desire to schedule a one-on-one meeting with PM CAS representatives to discuss Indirect Fires Munitions.

The Government is interested in discussing Industry’s input on multi-year contracting during these one-on-ones. Specifically, Industry’s experiences in multi-year contracting, benefits to the contractor, and as a result, what benefits the Government would see if it pursued multi-year contracting opportunities. The Government is also interested in hearing any drawbacks contractors have experienced in multi-year contracting. If requesting a one-on-one for this event, the Government would request Industry provide examples of successful implementation of multi-year contracting and be prepared to discuss during the meeting. Please submit white papers to the POC in this notice ahead of the event.

OIB P3 and/or Co-production Opportunities One-on-One Sessions

In this announcement, the Government is providing material relating to each GOGO site to facilitate discussion of P3s and/or Co-Production opportunities during the OIB portion of the event. See reference document ‘GOGO Site Snapshot’ for an overview of the features of each location. Further information will be provided at the General Session, as well.

The Government requests Industry review this documentation and then register for the general session and sign up for subsequent one-on-one meetings to foster exchange of ideas for P3 and/or Co-production opportunities with representatives from each of the sites. White papers are not requested ahead of this event; however, the Government may request them after conducting one-on-ones to further explore opportunities discussed.

If registering for an OIB one-on-one, you must indicate your level of interest in meeting with each site location and then rank your preferences to meet with each site. Due to anticipated large volume of one-on-one requests, the Government will use the data submitted to best schedule one-on-one meetings to align Government and Industry interests. Please note that ranking a specific site first on your preference list may not result in a meeting with that site. The Government will do its best to accommodate within the time slots available.

Instructions for Registration

Registration for the General Session and both one-on-one meeting requests can be done via the link attached to this notice: OIB and Indirect Fire Munitions Industry Day Registration Link. See instructions below.

For both one-on-one opportunities, length of time per session is to be determined based on interest. The Government will coordinate to ensure maximum participation, but due to availability of personnel and time slots, cannot guarantee all one-on-one requests will be granted. You will be promptly notified after registration closes of whether or not a one-on-one has been scheduled and, if so, the time and location of your session.

If you have any questions regarding the event, please reach out to the ACC-RI Source Selection Support Center of Excellence (S3COE) team at usarmy.ria.acc.mbx.s3coe@army.mil.

--------------------------------------------------------------------------------------------------------------------

February 3, 2026:

Title has been updated and additional details have been incorporated and underlined below.

--------------------------------------------------------------------------------------------------------------------

Army Contracting Command - Rock Island (ACC-RI), on behalf of Portfolio Acquisition Executive Agile Sustainment and Ammunition (PAE AS&A) and Army Materiel Command (AMC) plans to hold an Industry Day on 19-20 March 2026 at the Hilton Parsippany located at One Hilton Court, Parsippany, NJ 07054.

This posting is to notify Industry of the Government's intent to hold the Industry Day and subsequent one-on-one sessions to assist with planning and travel arrangements. Registration information for the general session and one-on-one meetings will be forthcoming in a subsequent posting.

The intention of the Industry Day is to discuss opportunities available across the Organic Industrial Base (OIB) for Public-Private-Partnerships (P3) and/or Co-Production at the Government Owned, Government Operated (GOGO) installations and Armament Retooling and Manufacturing Support (ARMS) Program at the Government Owned, Contractor Operated (GOCO) installations. The Government will also provide an overview of Enhanced Use Leases (EUL). The Government is seeking input from both traditional and non-traditional defense contractors in shaping the outlook for P3s, Co-Production and ARMS across the OIB. The USG plans to also highlight key areas where industry can address critical gaps and contribute to strengthening our capabilities.

Additionally, Program Manager Combat Ammunition Systems (PM CAS) will provide information on project planning for Mortar and Artillery Munition Development and Production Opportunities including 60/81/120mm Mortar Cartridge and 105/155mm Projectile Load/Assemble/Pack (LAP), Metal Parts, Fuzes, Propellants, Primers, and associated materials.

The Government will provide additional information specific to sites across the OIB in subsequent updates prior to the Industry Day event.

If you have any questions regarding the event, please reach out to the ACC-RI Source Selection Support Center of Excellence (S3COE) team at usarmy.ria.acc.mbx.s3coe@army.mil.

Attachments/Links