Crooked Creek Jib Crane Work Platform and Safety Updates

Active

Contract Opportunity

This is a Pre-Solicitation Notice only. This notice does not provide documentation, site visits, Request for Quote, or other pertinent information. The Solicitation, Request for Quote (RFQ), will be posted later with all project details, including, but not limited to drawings and site visit – please see below for more information about this upcoming project.

The U.S. Army Corps of Engineers, Pittsburgh District, has a project that involves erecting a platform on the exterior of the Control Tower at Crooked Creek Lake located in Armstrong County, PA. The purpose of the platform is to facilitate maintenance on the previously installed jib crane which is otherwise inaccessible to workers. The timing of this contract coincides with new OSHA requirements involving ladders and fall protection. Therefore, while not necessarily part of erecting a platform, updates to the exterior ladder in the vicinity of the platform are made as well while the Contractor is mobilized.

The jib crane on the exterior of the Control Tower is the only means of raising and lowering the stoplogs in the raking platform of the tower. This crane has not been regularly maintained since the 1990’s when it was installed. Currently, the only way to reach the crane is to lean off from a permanent ladder on the exterior of the tower, or rappel from above. Neither of these options is feasible, and the crane has started to fall into disrepair.

To install the work platform, the existing ladder cage needs to be demolished on the exterior of the tower. The existing fall protection system is retained. This is also consistent with new regulations that disallow ladder cages.

The platform itself is made of structural steel framing, aluminum bar grating and aluminum hand railing. It is installed at an elevation such that maintenance workers can walk the length of the jib while it is in the parked position to do maintenance. The platform will have a mezzanine slide gate to allow the jib hoist to swing out over the raking platform without impacting the hand railing.

The distance from the Operations Platform to the work platform is less than 24 feet, therefore no fall protection is required. From the new work platform to the Raking Platform is greater than 24 feet. Rather than install new fall protection here, a step off platform is installed between the two, ensuring no free fall distance greater than 24 feet. No new fall protection is required on the exterior of the control tower.

The North American Industrial Classification Code (NAICS) is 237990 – Other Heavy and Civil Engineering Construction. The Small Business Size Standard is $45,000,000.00.

This procurement is a 100% Small Business Set-Aside. All interested and capable offerors are encouraged to submit a quote.

Any resultant award will be for one (1) Firm-Fixed Price (FFP) Contract. All responsible offerors are encouraged to submit a quote. The Request for Quote (RFQ) will be issued on, or about, 23 July 2026, via the Procurement Integrated Enterprise Environment (PIEE), which posts the opportunity to SAM.gov. The Period of Performance (POP) is 365 Calendar Days after written Notice to Proceed (NTP).

In accordance with DFARS 252.240-7997 (CD 2026-O0025), all contractors are required to have a current (i.e., not more than three years old) NIST SP 800-171 DoD Assessment on record in the Supplier Performance Risk System (SPRS) to be considered for award. You are required to conduct, at a minimum, a Basic Assessment of your compliance with the 110 security controls outlined in NIST SP 800-171 and submit your summary level score to SPRS located in the Procurement Integrated Enterprise Environment (PIEE). We encourage your company to complete the NIST SP 800-171 Assessment via SPRS prior to the RFQ due date, but no later than award, to be considered for an award.

Small Business Contractors are advised that APEX Accelerators provide free, expert assistance to small businesses interested in competing for federal, state, and local government contracts. Funded in part by the Department of Defense, these centers help businesses navigate the complexities of government procurement, from initial registration in systems like SAM to proposal review and submission. Small businesses are strongly encouraged to connect with their local APEX Accelerators to leverage these valuable services and enhance their potential for success in securing government contracts. The APEX Accelerators Website is: https://www.apexaccelerators.us/#/. From here, you can locate your local APEX Accelerators.

To submit a quote for this project, your company must:

1) Be registered in the System for Award Management (SAM) and maintain an active registration status.

2) be registered in the Procurement Integrated Enterprise Environment (PIEE) for the Solicitation Module with the PROPOSAL MANAGER Role.

System for Award Management (SAM) Registration

Registering in SAM.gov includes both entity validation and entity registration.

To register in SAM:

a) Navigate to SAM.gov

b) Select Sign-In (top right)

c) Select Create an Account then follow the instructions

d) After Account is set-up, Select Sign-In

e) Under the Entity Management widget, select “Get Started” button

f) Select Register Entity. As part of the entity registration, a Unique Entity ID will be assigned.

For additional information on SAM

To Register your Entity (Company), please visit https:/www.fsd.gov/gsafsd_sp?id=gsa_index.

Here you will find the following:

Get Started with your Registration

Check Registration Status – ACTIVE, INACTIVE, PENDING

Update your Registration

Become an Entity Administrator

Validate your Entity

*Access User Guides

*By selecting this option, you can obtain a Quick Start Guide for Contract Registrations.

Also, here you will find in addition to the User Guides - FAQs, Videos, and Definitions.

PLEASE NOTE:

It is mandatory that all companies be registered in SAM in order to receive federal contracts. There is no charge to register or maintain your company (entity) registration.

Login.gov manages usernames and passwords for SAM.gov.

*Important* Registration Information

Registration can take at least ten (10) business days to be active in SAM.gov.

Registration must be in active status upon offer submission and remain active during award period.

Registration must be renewed every 365 days to remain active.

The Federal Service Desk (FSD) for SAM questions, may be contacted.

Phone Number: 866-606-8220

Hours of Operation: Monday-Friday 8 a.m. to 8 p.m. ET

Procurement Integrated Enterprise Environment (PIEE) Solicitation Module Registration.

To register for PIEE follow the below instructions.

Register in PIEE:

a) Navigate to https://piee.eb.mil/

b) Select Register (top right)

c) Select Vendor

d) Create a User ID and Password and follow the prompts (next)

e) Create Security Questions (next)

f) Complete your User Profile Information (next)

g) Complete your supervisor or Approving Official Information (next)

h) Complete Roles

i) Step 1: Select SOL-Solicitation

ii) Step 2: Select Proposal Manager

iii) Step 3: Click Add Roles

iv) Step 4: Fill in your Location Code (CAGE Code) (next)

i) Provide Justification for your registration (next)

j) Follow the remaining prompts to submit your registration

The Procurement Integrated Enterprise Environment (PIEE) help desk may be reached by calling Telephone Number 866-618-5988 for assistance.

Attachments/Links