Rehabilitate Runway 11L-29R, 15 Wing Moose Jaw, Saskatchewan

Location:	Federal
Posted:	Feb 7, 2025
Due:	Mar 18, 2025
Agency:	Government of Canada
Type of Government:	State & Local
Category:	Z - Maintenance, Repair or Alteration of Real Property
Solicitation No:	MJ238821_CN81686
Publication URL:	To access bid details, please log in.

Description

DEFENCE CONSTRUCTION CANADA (DCC) – MJ238821_CN81686 – Rehabilitate Runway 11L-29R, 15 Wing Moose Jaw, Saskatchewan
The work includes, but is not necessarily limited to, the supply of labour, material, supervision, and equipment necessary to reconstruct the Runway 11-29R at 15 Wing Moose Jaw, Saskatchewan.
A site visit has been arranged for the following date, time, and location. It is highly recommended that bidders attend this visit.

Date: Thursday, February 27, 2025

Time: 10:30am (local time)

Location: Room 216, Building 64, 15 Wing Moose Jaw, Saskatchewan
The estimated cost for this opportunity is in the range of $38,000,000.00
The Work must reach Substantial Completion no later than 544 calendar days after notification of contract award and must be completed no later than 30 calendar days after the date of Substantial Completion.
As per Acknowledgement Document, Item 7 – Bidders are advised that it is understood and agreed that in the event of their Tender being accepted within 30 (thirty) calendar days of the date and time stated for closing of tenders and their failing or refusing to carry out the contract in accordance with the terms of their Tender, their bid security, if required by the tender, (i) if in the form of a wire transfer, shall be forfeited to His Majesty the King in Right of Canada, or (ii) if in the form of a Bid Bond, the Bonding Company shall be liable in accordance with the Bond.
This solicitation is being conducted in accordance with the requirements set out in the Canadian Free Trade Agreement (CFTA), Chapter Nineteen of the Canada-European Union Comprehensive Economic and Trade Agreement (CETA) and the World Trade Organization Agreement on Government Procurement (WTO-GPA).
The selected contractor will be required to hold a valid Designated Organization Screening (DOS), issued by the Contract Security Program (CSP) within Public Services and Procurement Canada (PSPC). Details concerning the Security Requirements for this project are identified in Amendment No.1 to the tender documents.
Questions regarding this solicitation are to be directed ONLY to the point of contact identified in this advertisement. Bidders who address their questions to anyone other than the point of contact during the solicitation period may, for that reason alone, be disqualified.
Bidders can obtain contract award results from the DCC website at https://www.dcc-cdc.gc.ca/industry/contract-activity .
DCC now publicly discloses information on payments made to prime contractors so that subcontractors know when they can expect payment. Information on payments made in the past 90 days on construction contracts over $100,000, as well as further information regarding DCC’s prompt payment commitment, can be obtained from the DCC website at https://www.dcc-cdc.gc.ca/industry/contract-activity .

code : 1
description : IBP Amount (as defined in the Supplementary Conditions), expressed in dollars ($)

Montant du VPA (tel que défini dans les conditions supplémentaires), exprimé en dollars ($)
unitOfMeasure : Dollar
weight : 10.00

code : 2
description : Mill existing asphalt pavement (100 mm typical) and remove from site; as per Specification Section 02 41 13, Paragraph 1.4.5

Fraisage du revêtement en asphalte existant (généralement 100 mm) et enlèvement du site; conformément au paragraphe 1.4.5 de la section 02 41 13 des spécifications
quantity : 123000
unitOfMeasure : Square Meter

code : 3
description : Remove existing asphalt pavement full depth, remove from site; as per Specification Section 02 41 13, Paragraph 1.4.5

Enlèvement du revêtement en asphalte existant sur toute sa profondeur et enlèvement du site; conformément au paragraphe 1.4.5 de la section 02 41 13 des spécifications
quantity : 13300
unitOfMeasure : Square Meter

code : 4
description : Remove existing concrete pavement full depth, remove from site; as per Specification Section 02 41 13, Paragraph 1.4.4

Enlèvement du revêtement de béton existant sur toute sa profondeur et enlèvement du site; conformément au paragraphe 1.4.4 de la section 02 41 13 des spécifications
quantity : 12750
unitOfMeasure : Square Meter

code : 5
description : Common Excavation 300mm to subbase and remove from site; as per Specification Section 31 22 14, Paragraph 1.2.2

Excavation courante aux couches de fondation (300 mm) et enlèvement du site; conformément au paragraphe 1.2.2 de la section 31 22 14 des spécifications
quantity : 3825
unitOfMeasure : Cubic Meter

code : 6
description : Common Excavation to subgrade and remove from site; as per Specification Section 31 22 14, Paragraph 1.2.2

Excavation courante au sol de fondation et enlèvement du site; conformément au paragraphe 1.2.2 de la section 31 22 14 des spécifications
quantity : 28600
unitOfMeasure : Cubic Meter

code : 7
description : Remove existing 150mm subdrain pipe and supply and install new 200mm PVC subdrain pipe; as per Specification Section 33 46 17, Paragraph 1.3

Enlèvement des canalisations de drainage souterraines (150 mm) existantes, et fourniture et installation de nouvelles canalisations de drainage souterraines (200 mm) en PVC; conformément au paragraphe 1.3 de la section 33 46 17 des spécifications
quantity : 4565
unitOfMeasure : Meter

code : 8
description : Remove existing subdrain pipe and supply and install new 200mm PVC subdrain pipe (perforated); as per Specification Section 33 46 17, Paragraph 1.3

Enlèvement des canalisations de drainage souterraines existantes, et fourniture et installation de nouvelles canalisations de drainage souterraines (200 mm) perforées en PVC; conformément au paragraphe 1.3 de la section 33 46 17 des spécifications
quantity : 190
unitOfMeasure : Meter

code : 9
description : Remove existing subdrain pipe and supply and install new 250mm PVC subdrain pipe (perforated); as per Specification Section 33 46 17, Paragraph 1.3

Enlèvement des canalisations de drainage souterraines existantes et fourniture et installation de nouvelles canalisations de drainage souterraines (250 mm) perforées en PVC; conformément au paragraphe 1.3 de la section 33 46 17 des spécifications
quantity : 220
unitOfMeasure : Meter

code : 10
description : Remove existing 200mm subdrain pipe and supply and install new 250mm PVC subdrain pipe (perforated); as per Specification Section 33 46 17, Paragraph 1.3

Enlèvement des canalisations de drainage souterraines existantes (200 mm), et fourniture et installation de nouvelles canalisations de drainage souterraines (250 mm) perforées en PVC; conformément au paragraphe 1.3 de la section 33 46 17 des spécifications
quantity : 1025
unitOfMeasure : Meter

code : 11
description : Remove existing 200mm storm water pipe and supply and install new 250mm Class V (140-D) reinforced concrete storm water pipe, as per Specification Section 33 44 00, Paragraph 1.4.1

Enlèvement des conduites d’évacuation des eaux pluviales (200 mm) existantes, et fourniture et installation de nouvelles conduites d’évacuation des eaux pluviales (250 mm) en béton armé de classe V; conformément au paragraphe 1.4.1 de la section 33 44 00 des spécifications
quantity : 127
unitOfMeasure : Meter

code : 12
description : Remove existing storm water pipe and supply and install new 375mm PVC storm water pipe; as per Specification Section 33 44 00, Paragraph 1.4.2

Enlèvement des conduites d’évacuation des eaux pluviales existantes, et fourniture et installation de nouvelles conduites d’évacuation des eaux pluviales (375 mm) en PVC; conformément au paragraphe 1.4.2 de la section 33 44 00 des spécifications
quantity : 54
unitOfMeasure : Meter

code : 13
description : Remove existing storm water pipe and supply and install new 650mm Class V (140-D) reinforced concrete storm water pipe; as per Specifications Section 33 44 00, Paragraph 1.4.1

Enlèvement des conduites d’évacuation des eaux pluviales existantes, et fourniture et installation de nouvelles conduites d’évacuation des eaux pluviales (650 mm) en béton armé de classe V (140-D); conformément au paragraphe 1.4.1 de la section 33 44 00 des spécifications
quantity : 134
unitOfMeasure : Meter

code : 14
description : Adjust manhole tops; as per Specification Section 02 41 13, Paragraph 1.4.2

Rajustement des couvercles de trous d’homme; conformément au paragraphe 1.4.2 de la section 02 41 13 des spécifications
quantity : 81
unitOfMeasure : Each

code : 15
description : Supply and install new Type G Manhole; as per Specifications Section 33 05 14, Paragraph 1.3.2

Fourniture et installation de nouveaux trous d’homme de type G; conformément au paragraphe 1.3.2 de la section 33 05 14 des spécifications
quantity : 4
unitOfMeasure : Each

code : 16
description : Subgrade preparation including scarification, re-grading, compaction, and proofrolling; as per Specifications Section 31 22 14, Paragraphs 1.2.5, 1.2.6

Préparation du sol de fondation, y compris scarification, nivellement, compactage et cylindrage d'essai; conformément aux paragraphes 1.2.5, 1.2.6 de la section 31 22 14 des spécifications
quantity : 53700
unitOfMeasure : Square Meter

code : 17
description : Supply and install new geotextile; as per Specification Section 31 32 19.01, Paragraph 1.3.1

Fourniture et installation de nouveaux géotextiles; conformément au paragraphe 1.3.1 de la section 31 32 19.01 des spécifications
quantity : 24390
unitOfMeasure : Square Meter

code : 18
description : Place and compact crushed concrete granular 500mm subbase, as per Specification Section 32 11 16, Paragraph 1.2

Mise en place et compactage d’une couche (500 mm) de fondation de béton concassé (granulaire); conformément au paragraphe 1.2 de la section 32 11 16 des spécifications
quantity : 4460
unitOfMeasure : Cubic Meter

code : 19
description : Supply, place and compact new 500mm granular subbase; as per Specifications Section 32 11 16, Paragraph 1.2

Fourniture, mise en place et compactage d’une nouvelle couche (500 mm) de fondation granulaire; conformément au paragraphe 1.2 de la section 32 11 16 des spécifications
quantity : 4475
unitOfMeasure : Cubic Meter

code : 20
description : Place and compact asphalt millings as granular 350mm subbase, as per Specification Section 32 11 16, Paragraph 1.2

Mise en place et compactage d’une couche (350 mm) de fraisats d’asphalte; conformément au paragraphe 1.2 de la section 32 11 16 des spécifications
quantity : 7600
unitOfMeasure : Cubic Meter

code : 21
description : Supply, place and compact new 300mm granular base; as per Specification Section 32 11 23, Paragraph 1.2

Fourniture, mise en place et compactage d’une nouvelle couche (300 mm) de fondation granulaire; conformément au paragraphe 1.2 de la section 32 11 23 des spécifications
quantity : 8735
unitOfMeasure : Cubic Meter

code : 22
description : Supply, place and compact new 150mm granular base, as per Specification Section 32 11 23, Paragraph 1.2

Fourniture, mise en place et compactage d’une nouvelle couche (150 mm) de fondation granulaire; conformément au paragraphe 1.2 de la section 32 11 23 des spécifications
quantity : 3255
unitOfMeasure : Cubic Meter

code : 23
description : Supply, place and compact new hot mix asphalt (HMA) binder course (50 mm lift); as per Specification Section 32 12 16, Paragraph 1.3.2

Fourniture, mise en place et compactage d’une nouvelle couche (couche de 50 mm) de liaison en bitume mélangé à chaud (HMA); conformément au paragraphe 1.3.2 de la section 32 12 16 des spécifications
quantity : 125000
unitOfMeasure : Square Meter

code : 24
description : Supply, place and compact new hot mix asphalt (HMA) surface course (50 mm lift); as per Specification Section 32 12 16, Paragraph 1.3.1

Fourniture, mise en place et compactage d’une nouvelle couche (couche de 50 mm) de roulement en bitume mélangé à chaud (HMA); conformément au paragraphe 1.3.1 de la section 32 12 16 des spécifications
quantity : 125000
unitOfMeasure : Square Meter

code : 25
description : Supply, place and compact new hot mix asphalt (HMA) surface course (65 mm lift); as per Specification Section 32 12 16, Paragraph 1.3.3

Fourniture, mise en place et compactage d’une nouvelle couche (couche de 65 mm) de roulement en bitume mélangé à chaud (HMA); conformément au paragraphe 1.3.3 de la section 32 12 16 des spécifications
quantity : 20570
unitOfMeasure : Square Meter

code : 26
description : Supply, place and finish new concrete pavement (350mm thick); as per Specification Section 32 13 13, Paragraph 1.3.1.1

Fourniture, mise en place et finition d’un nouveau revêtement (épaisseur de 350 mm) de chaussée en béton; conformément au paragraphe 1.3.1.1 de la section 32 13 13 des spécifications
quantity : 11500
unitOfMeasure : Square Meter

code : 27
description : Complete full depth asphalt crack repairs (1m wide); as per Specification Section 32 01 18, Paragraph 1.3.1

Scellement complet des fissures de chaussée (largeur de 1 m); conformément au paragraphe 1.3.1 de la section 32 01 18 des spécifications
quantity : 3000
unitOfMeasure : Meter

code : 28
description : Supply and install new neoprene joint sealant; as per Specification Section 32 32 23, Paragraph 1.3.1

Fourniture et installation d’un nouveau produit d’étanchéité pour joints en néoprène; conformément au paragraphe 1.3.1 de la section 32 32 23 des spécifications
quantity : 3670
unitOfMeasure : Meter

code : 29
description : Place 100mm topsoil, hydroseed and fertilize all areas disturbed by work; as per Specification Section 32 92 21, Paragraph 1.2.2

Mise en place de terre végétale (épaisseur de 100 mm), ensemencement hydraulique et application d’engrais pour toutes les zones perturbées par les opérations; conformément au paragraphe 1.2.2 de la section 32 92 21 des spécifications
quantity : 42000
unitOfMeasure : Square Meter

code : 30
description : Remove and reinstall existing runway approach lighting, edge lighting, and signage; as per all Section 34 Specification sections

Enlèvement et réinstallation du balisage lumineux d’approche, des feux de bord et de la signalisation de la piste; conformément à toutes les sections de la section 34 des spécifications
quantity : 1
unitOfMeasure : Lump-Sum

code : 31
description : Balance of Project - All other costs not included in items 2 to 30

Solde du projet —L’ensemble des autres coûts qui ne sont pas inclus dans les éléments 2 à 30
quantity : 1
unitOfMeasure : Lump-Sum

Bidding and Documents are available on http://www.merx.com . Fees may apply; See https://www.merx.com/public/pricing for more information.

Show more description Show less description

Contract duration

The estimated contract period will be 0 month(s), with a proposed start date of 2026/09/30.

Trade agreements

World Trade Organization Agreement on Government Procurement (WTO GPA)
Canadian Free Trade Agreement (CFTA)
Canada-European Union Comprehensive Economic and Trade Agreement (CETA)

Partner with another business

The functionality to add your company name to the list of interested businesses is temporarily unavailable.

This list does not replace or affect the tendering procedures for this procurement process. Businesses are still required to respond to bid solicitations, and to compete based on the set criteria. For more information please read the Terms of use .

Rehabilitate Runway 11L-29R, 15 Wing Moose Jaw, Saskatchewan

See also