Addendum 2 - Jonathan Law High School Career Technology Education Additions and Alterations

ADDENDUM #2
CAREER TECHNOLOGY EDUCATION ADDITIONS & ALTERATIONS
JONATHAN LAW HIGH SCHOOL
20 LANSDALE AVENUE
MILFORD, CT 06460
STATE PROJECT #084-0217 EA
S/P+A PROJECT #24.161
DATE: June 9, 2026
The following changes to the Drawings and Project Specifications shall become a part of the Drawings
and Project Specifications; superseding previously issued Drawings and Project Specifications to the
extent modified by Addendum #2.
General Information:
* The deadline for RFIs is Thursday, June 18, 2026.
* See attached RFI log. Questions unanswered will be responded to in a future addendum. (2)
Changes to the Specifications:
* SUPPLEMENTARY INSTRUCTIONS TO BIDDERS, Page 1, Article 1.2.A., revise
"fbialka@ci.milford.ct.us" to read "fbialka@milfordct.gov". (Per Owner)
Changes to the Drawings:
* The following ARCHTIECTURAL drawings have been deleted in their entirety. New drawings have
been added and are attached as part of this addendum*:
A211B 1ST FLOOR FINISH PLAN - PART 'B' (Per RFI #009)
o
A211C 1ST FLOOR FINISH PLAN - PART 'C' (Per RFI #009)
o
The bid date remains June 29, 2026 at 3:00pm by this addendum.
The addendum consists of three (3) pages of 812" x 11" text and two (2) 30" x 42" drawings*.
End of Addendum #2
Jonathan Law High School Career Technology Education Additions & Alterations - Milford
State Project #084-0217 EA Addendum #2-1

BID RFI LOG
SILVER PETRUCELLI + ASSOCIATES
3190 Whitney Avenue | Hamden CT 06518
311 State Street | New London CT 06320
Project:Jonathan Law HS CTE Additions & Alterations
6/11/2026
State Project #:084-0217 EA RFI Deadline:06/18/2026
06/18/26, 3:00p
S/P+A Project #:24.161 Bids Due:06/29/26, 3:00p
RFI # QUESTION DATE RESPONSE ADDENDUM #
RECEIVED ISSUED
Bidder is to provide the # of days to substantially
Could you please provide the substantial completion date? I complete the entire project in their Bid Form. A
001 06/02/26 1
know the abatement must be completed by August this year. preliminary schedule for both the entire project &
abatement portion is also required with the Bid.
What is the expected substantial completion date for this
002 06/05/26 Refer to RFI #001. 1
project?
003 Will the City waive the permit fees? 06/05/26 Refer to SIB, 9.3. 1
Are there ballistic steel doors on the project? The only ballistic
No, ballistic doors are wood. Refer to Addendum #1 for
004 door wihtout a blast rating on the prints is door 31B.3 and it is 06/05/26 1
additional information.
shown as wood.
Bid due date to be extended however substantial
Many of my subcontractors are saying the bid date is too
005 06/05/26 completion date for abatement does change. Refer to 1
soon. Can it be extended?
Addendum #1.
PE is a polyethylene core that is not fire rated. Should we
006 06/05/26 Yes, per Section 074213.23. 1
carry this?
1/4" (6mm) thick panels aren't available; only 3mm and 4mm
4mm. Refer to Addendum #1 for Section 074213.23
007 are available for PE and only 4mm for FR (fire-rated). Which 06/05/26 1
revisions.
one should we choose for this scope?
Is the GC repsonsible for purchasing all of the equipment Yes, unless otherwise indicated on the equipment
008 06/05/26 1
listed on the drawings? schedules.
The specifications manual contains section 096523 - metal
Metal base is in Vestibule 31E. Refer to Addendum #2
009 base. And yet I could not this item on the finish schedule. 06/08/26 2
for revised Drawings A211B & A211C.
Indicate the locations and extent of application of this item.
Confirm who will be paying for third party testing, we note that
IBC 2021 Section 1704.2 requires special inspections to be
performed by an approved agency retained by the Owner or
Owner's agent, "other than contractor", in accordance with the
independence requirements of IBC 2021 Section 1703.1.1.
Unless otherwise indicated in the project manual, Owner
010 Given that these services typically are to be performed by the 06/09/26 2
is responsible to retain and pay for third-party testing.
Owner's retained agency, and that the scope and frequency of
required testing are not fully defined, please confirm whether
the Owner will retain and pay for these services directly, or if
the Contractor is to carry an allowance or other defined value
for inclusion in the proposal.
Confirm the GC owns the cost of all temporary equipment,
011 electric, water, heat etc. Will the GC be allowed to hook up to 06/09/26 Refer to Section 015000. 2
the existing services for construction purposes?
Confirm Builders Risk insurance is to be carried by the
012 06/09/26
General Contractor.
Confirm OCP insurance is required to be carried by the
013 06/09/26
general contractor
Will the General Contractor be required to provide snow
014 06/09/26
plowing during the course of the construction
Are there any requirements for the contractor to provide for
015 06/09/26
any clerk of the works.
For all equipment shown on Sheets A451, A452, and A453, is
No preferred vendors as most items are readily
there are preferred/recommended vendor and/or supplier
sourced. Refer to attached list for available vendors of
016 identified for sourcing the equipment package. If so, is this 06/09/26 2
Manufacturing specialized equipment. Substitutions are
required to be a sole sourced supplier or is this open to other
allowed, following Section 012500.
suppliers in accordance with the specifications?
The specifications and ITB do not state a specified questions
017 06/09/26 Refer to Addendum #1. 2
deadline. When is the deadline for all Prebid questions.
The specifications do not state a substantial completion date
018 for this project. When is the planned dare and or how many 06/09/26 Refer to RFI #001. 2
days are planned for this project?
Confirm the contractor is to provide Attachments 1-5 along
with the bid from with submission of the bid. Bid bond,
019 06/09/26 Confirmed. 2
contractor pre qual statement, updated bid statement, prelim
Abatement schedule, prelim project schedule.
Please confirm the extent of protection required by the
contractor to separate the occupied areas of the building from
020 06/09/26
the construction area. As the contractor will be working in the
existing child development while the school is occupied.
Page 1 of 1

RFI #016
Manufacturing Specialized Equipment Vendor Information
M-01, M-02, M-09, M-10
Haas
Lorraine Palmer
Trident Machine Tools, LLC
860-878-4835
lpalmer@hfotrident.com
M-03
Prototrak
TRAK Machine Tools
Walt Ostrom
203-231-6221
Wostrom@trakmt.com
M-04
Chevalier
Morris Group
Joe Margaitis
860-816-4433
jmargaitis@morrisgroupinc.com
M-05
IAP
Ryan Looper
931-372-0050 x225
ryan@iap-airproducts.com
M-06
Kalamazoo
Anderson Machinery Co
Carl Anderson
203-375-4481
Andersonmach777@gmail.com
M-08
Hexagon Manufacturing Intelligence
Shawn Grady
401-932-5485
Shawn.grady@hexagon.com

FINISH PLAN LEGEND
ROOM FINISH TAG
Room name ROOM NAME
101 ROOM NUMBER
PT-1 WALL FINISH
RB-1 BASE FINISH
CPT-1 FLOOR FINISH
* REFER TO FINISH PLAN, PATTERN PLAN, OR RELATED
FINISH DRAWINGS FOR ADDITIONAL DETAILED FINISH INFORMATION
ROOM ACCENT TAG
PT-2 WALL ACCENT
RB-2 BASE ACCENT
FINISH TRANSITION TAG
LINE OF FINISH
TRANSITION
FINISH (1) LVT-1 CPT-1 FINISH (2)
GENERAL FINISH NOTES
A. REFER TO PROJECT MANUAL AND 90000 SCHEDULE OF
FINISHES FOR FINISH TYPES AND ABBREVIATIONS.
B. REFER TO FINISH SCHEDULE AND FINISH PLAN FOR GENERAL
FINISHES. REFER TO ALL INTERIOR FINISH NOTES, AND
INTERIOR DRAWINGS (INCLUDING PLANS, ELEVATIONS &
DETAILS) FOR COMPLETE INTERIORS INFORMATION.
C. REFER TO ANSI 117.1 FOR MOUNTING HEIGHTS & FLOOR
CLEARANCES.
D. ALIGN TRANSITION OF FLOOR MATERIAL WITH CENTER OF
HINGE IN DOORWAY, U.O.N;. IN A WRAPPED OPENING WITHOUT
HINGES, REFERENCE FINISH PLANS FOR TRANSITION
LOCATIONS.
E. PROVIDE MANUFACTURER'S RECOMMENDATIONS FOR
TRANSITION BETWEEN UNLIKE FLOORING MATERIALS, U.O.N.
F. FLOOR FINISHES TO EXTEND BENEATH MILLWORK.
G. CONTRACTOR TO INSTALL WALL BASE ON ALL WALLS UNLESS
OTHERWISE NOTED.
H. CONTRACTOR TO DETERMINE TAKE-OFF QUANTITIES AND
ADHESIVE REQUIREMENTS FOR ALL FINISHES.
STEM & IT DESIGN I. CONTRACTOR TO INSTALL A SINGLE-PIECE, ADA-COMPLIANT,
STUDIO STUDIO SOLID STONE THRESHOLD AT ALL FLOORING TRANSITIONS TO
38 39 TOILET ROOMS.
EP-10 EP-10 CLASSROOM J. PROVIDE WALL PLATES AND RECEPTACLES TO BEST MATCH
RB-1 RB-1 CLASSROOM 41 WALL FINISH AND LIGHT REFLECTIVE VALUE AND/OR FINISH TO
VCT-1 VCT-1 40 MATCH WALL FINISH.
EP-2
EP-2 K. REFER TO PROJECT MANUAL FOR FLOOR LEVELER RB-1
RB-1 RECOMMENDATIONS, TYPICAL. VCT-5
VCT-5
FINISH HATCH LEGEND
MANUFACTURE STUDIO CPT-2 VCT
37
CHORUS
42
ACCENT
CPT-3
VCT *
CPT-3
ACCENT
CPT-4
VCT *
NO HATCH IS INDICATED FOR CPT-1 AS IT IS INSTALLED
WITHOUT ACCENTS OR PATTERN. REFER TO SHEET A211B,
THE PROJECT MANUAL, AND THE 90000 SCHEDULE OF
FINISHES FOR ANY ADD'L INSTALLATION INFORMATION.
CORRIDOR
* REFER TO FINISH PLAN ANNOTATIONS FOR ACTUAL
58
ACCENT DESIGNATION
EP-5
RB-2
VCT-1
OFFICE CUSTODIAL
31A 33
EP-8
RB-1
CHILD
VCT-1
DEVELOPMENT
CLASSROOM
31
EP-8
RB-1
TLT
VCT-1
32
TLT
31C
EP-8 *
CWB-2
PFT-2
CHILD CARE
31B
EP-8
RB-3
CPT-1,4
STO'G
31D
EP-8
RB-1
CPT-1
VESTIBULE
31E
EP-3
*
WOM-1
1-PE 1-PE
C B
TYP.
TYP. 2
2 A211A
A211A
COMPUTER LAB /
PRECISION INSPECTION
37A
VCT-4 VCT-4
EP-6 EP-6
VCT-4 VCT-4
DWG-3C DWG-3B DWG-2B
F01 F01
DWG-3A PT-5 PT-5
VCT-4
CORRIDOR
VCT-2 VCT-4 VCT-2 VCT-4 VCT-2 DWG-2A VESTIBULE 57
58A
DWG-8 EP-6
VCT-4 VCT-4
RB-5
VCT-2
VCT-4
VCT-2
VCT-4
EP-6
EP-9
PT-4
PT-4
C B
1-GWD
F03 F03
F04 F04 F04
EP-6
CPT-1
CPT-4
ALIGN SEAMS
PART B
PROJECT
KEY PLAN NORTH
Project Title: Revision: Description: Date: Revised By: Drawing Title: Date: Drawing Number:
SILVER PETRUCELLI + ASSOCIATES
Scale:
As indicated
3190 WHITNEY AVENUE HAMDEN CT 06518
Project Phase: Drawn By:
311 STATE STREET NEW LONDON CT 06320
State Project Number: Project Number:
203 230 9007 silverpetrucelli.com
MA
15:34:9
6202/9/6
FINISH KEY NOTES - PLAN
F01 PATCH IN VCT-5 AS REQ'D; ALIGN SEAMS w/ EXISTING
F02 REFER TO ENLARGED FLOOR PATTERN PLANS FOR MORE
INFORMATION ABOUT COMPLEX FLOORING INSTALLATION
F03 BID ALTERNATE: NEW FLOORING; BASE BID: PATCH / REPAIR
ETR FLOORING AS REQUIRED
F04 BID ALTERNATE: WINDOW WALL GRAPHICS; BASE BID: ACCENT
EPOXY PAINT EP-7
1
RFI #009
1 1st FLOOR FINISH PLAN - PART B
1/8" = 1'-0"
1st FLOOR FINISH PLAN - PART B
Additions and Alterations: 10/31/2025
11 AADDDDEENNDDUUMM ##22 0066//0099//22002266
Jonathan Law High School Career Technology Education A211B
20 LANSDALE AVENUE ISSUED FOR BID - 05/29/2026 Phase 1 of 2
J. Lipset
MILFORD, CONNECTICUT 06460
#084-0217 EA
24.161

C B
WOOD
STORAGE
35B
EP-2
RB-2
SC-1
IT
37C
EP-10
RB-2
SC-1
WOOD STUDIO
35
MAINT. MANUFACTURE
EP-10
GARAGE RB-2 STUDIO
35C EFC-1 ELEC 37
EP-2 EP-10
37B
RB-2 RB-2 EP-10
SC-1 EFC-1 RB-2
SC-1
CORRIDOR
58
EP-5 TRANSPORTATION RB-2
STUDIO VCT-1
36
EP-10
RB-2
EFC-1
CONTROL CUSTODIAL
ROOM 33
34B
EP-7 RB-2
CPT-2, 3
COMMUNICATION
STUDIO
34
EP-8 TLT
RB-2 32
BROADCAST CPT-2, 3
RECORDING
34C
EP-8
RB-2
CPT-2, 3
C B
3-TP
COMPUTER
LAB /
PRECISION
COMPRESSOR INSPECTION
ROOM
37A
35A EP-10
EP-10 RB-2
RB-2 EFC-1
SC-1
EP-6
EP-6
EFC-2
VCT-4
VCT-2
VCT-4
VCT-4
CORRIDOR
59 CHILD DEVELOPMENT VCT-1
ETR CLASSROOM
RB-2 31
VCT-1
VCT-4
SOUND
RECORDING
34A
EP-8* TLT
RB-2 31C
CPT-2,3
CHILD CARE
31B
STO'G
31D
6-PE
EFC-2
RB-5 RB-5 EP-6
DWG-4F DWG-4E DWG-4D DWG-4C DWG-4B
DWG-5
DWG-4A
6-GWD
DWG-7A
DWG-7B DWG-7C DWG-7D
EP-6
6-PE
EP-6
EFC-3
7-PE
EP-6
VCT-4
VCT-4 VCT-2 VCT-2 VCT-4 VCT-2 VCT-2 VCT-2 VCT-4 VCT-4
VCT-4
F02
2
A211C
6-PE 5-BR
QE
"8/5
3-'7
QE
5'-0"
5'-0"
EP-6
6-PE 5-BR "0-'9
RB-5
RB-5
5-BR
ALIGN EDGE OF
EFC-2 w/ CORNER
15'-2 1/2"
EP-3
8" 3'-4" 1'-0"
4'-0"
FO
SEGDE
NGILA
.O.M
/w
3-CFE
ALIGN EDGES OF
EFC-3 w/ M.O.
"8-'3
"0-'01
"8-'4
"0-'01
"8/3
8-'3
4'-0"
ALIGN EDGES OF
EFC-3 w/ M.O.
"4-'3
5'-0"
DWG-8
4'-0" ALIGN "8-'4
3'-4" ALIGN EDGES OF
EFC-3 w/ M.O.
ALIGN
8'-4"
5'-4"
M.O.
ALIGN
QE
"2/1
9-'3
QE
ALIGN

QE
"4-'3
QE
"4-'3
EP-7
EP-7
7-PE
7-PE
FINISH PLAN LEGEND
CONTROL COMMUNICATION
ROOM STUDIO VCT-4
34B 34 ROOM FINISH TAG
EP-7 EP-8
Room name ROOM NAME
RB-2 RB-2
101 ROOM NUMBER
CPT-3 CPT-2, 3 CPT-2 CPT-3 CPT-2, 3
PT-1 WALL FINISH
RB-1 BASE FINISH
CPT-1 FLOOR FINISH
* REFER TO FINISH PLAN, PATTERN PLAN, OR RELATED
FINISH DRAWINGS FOR ADDITIONAL DETAILED FINISH INFORMATION
ROOM ACCENT TAG
PT-2 WALL ACCENT
RB-2 BASE ACCENT
FINISH TRANSITION TAG
LINE OF FINISH
TRANSITION
FINISH (1) LVT-1 CPT-1 FINISH (2)
VCT-1
GENERAL FINISH NOTES
VCT-4
A. REFER TO PROJECT MANUAL AND 90000 SCHEDULE OF
FINISHES FOR FINISH TYPES AND ABBREVIATIONS.
B. REFER TO FINISH SCHEDULE AND FINISH PLAN FOR GENERAL
FINISHES. REFER TO ALL INTERIOR FINISH NOTES, AND
INTERIOR DRAWINGS (INCLUDING PLANS, ELEVATIONS &
DETAILS) FOR COMPLETE INTERIORS INFORMATION.
C. REFER TO ANSI 117.1 FOR MOUNTING HEIGHTS & FLOOR
CPT-2 CPT-2
CLEARANCES.
BROADCAST CPT-2
D. ALIGN TRANSITION OF FLOOR MATERIAL WITH CENTER OF
RECORDING
HINGE IN DOORWAY, U.O.N;. IN A WRAPPED OPENING WITHOUT
34C CPT-3 HINGES, REFERENCE FINISH PLANS FOR TRANSITION
EP-8
LOCATIONS.
RB-2
E. PROVIDE MANUFACTURER'S RECOMMENDATIONS FOR CPT-2, 3 SOUND
TRANSITION BETWEEN UNLIKE FLOORING MATERIALS, U.O.N.
RECORDING
F. FLOOR FINISHES TO EXTEND BENEATH MILLWORK.
34A
CPT-3 EP-8* G. CONTRACTOR TO INSTALL WALL BASE ON ALL WALLS UNLESS
RB-2 OTHERWISE NOTED.
CPT-2,3 H. CONTRACTOR TO DETERMINE TAKE-OFF QUANTITIES AND
ADHESIVE REQUIREMENTS FOR ALL FINISHES.
I. CONTRACTOR TO INSTALL A SINGLE-PIECE, ADA-COMPLIANT,
SOLID STONE THRESHOLD AT ALL FLOORING TRANSITIONS TO
TOILET ROOMS.
J. PROVIDE WALL PLATES AND RECEPTACLES TO BEST MATCH
WALL FINISH AND LIGHT REFLECTIVE VALUE AND/OR FINISH TO
MATCH WALL FINISH.
K. REFER TO PROJECT MANUAL FOR FLOOR LEVELER
RECOMMENDATIONS, TYPICAL.
FINISH HATCH LEGEND
CPT-2 VCT
ACCENT
CPT-3 VCT *
CPT-3
ACCENT
CPT-4
VCT *
NO HATCH IS INDICATED FOR CPT-1 AS IT IS INSTALLED
WITHOUT ACCENTS OR PATTERN. REFER TO SHEET A211B,
THE PROJECT MANUAL, AND THE 90000 SCHEDULE OF
FINISHES FOR ANY ADD'L INSTALLATION INFORMATION.
* REFER TO FINISH PLAN ANNOTATIONS FOR ACTUAL
ACCENT DESIGNATION
F04 F04 F04 F04 F04
F04
F04
VESTIBULE
31E
PART C
PROJECT
KEY PLAN NORTH
Project Title: Revision: Description: Date: Revised By: Drawing Title: Date: Drawing Number:
SILVER PETRUCELLI + ASSOCIATES
Scale:
As indicated
3190 WHITNEY AVENUE HAMDEN CT 06518
Project Phase: Drawn By:
311 STATE STREET NEW LONDON CT 06320
State Project Number: Project Number:
203 230 9007 silverpetrucelli.com
MA
45:34:9
6202/9/6
FINISH SCHEDULE
No. ROOM NAME FLOOR FINISH BASE FINISH WALL FINISH CEILING FINISH COMMENTS
31 CHILD DEVELOPMENT VCT-1 RB-1 EP-8 ACT-1 TRIM PAINT, EP-3; DOOR PAINT, EP-4; ACCENT PAINT, EP-6
CLASSROOM
31A OFFICE VCT-1 RB-1 EP-8 ACT-1 TRIM PAINT, EP-3
31B CHILD CARE CPT-1,4 RB-3 EP-8 ACT-1 TRIM PAINT, EP-9; ACCENT PAINT, PT-4
31C TLT PFT-2 CWB-2 EP-8 * ACT-2 * DOOR TRIM PAINT, EP-9; INSTALL WALL TILE CWT-5, 6, 2, 7, 8 PER PATTERN SHOWN ON ELEVATIONS
4-7/A450
31D STO'G CPT-1 RB-1 EP-8 ACT-1 TRIM PAINT, EP-9
31E VESTIBULE WOM-1 * EP-3 ACT-1 * REFER TO DETAIL 4/A421 AND ELEVATION 9/A469 1 RFI #009
34 COMMUNICATION CPT-2, 3 RB-2 EP-8 ACT-1
STUDIO
34A SOUND CPT-2,3 RB-2 EP-8* ACT-1 BASE BID: AWP-4; BID ALTERNATE: AWP-2 APPLIED TO WALLS PER ELEVATIONS
RECORDING
34B CONTROL ROOM CPT-2, 3 RB-2 EP-7 ACT-1
34C BROADCAST CPT-2, 3 RB-2 EP-8 SAS-1 AWP-1 APPLIED TO WALLS PER ELEVATIONS; COLOR MATCH SAS-1 TO PT-1
RECORDING
35 WOOD STUDIO EFC-1 RB-2 EP-10 SAS-1
35A COMPRESSOR SC-1 RB-2 EP-10 PT-2
ROOM
35B WOOD STORAGE SC-1 RB-2 EP-2 PT-2
35C MAINT. GARAGE SC-1 RB-2 EP-2 PT-2
36 TRANSPORTATION STUDIO EFC-1 RB-2 EP-10 SAS-1 COLOR MATCH SAS-1 TO PT-1
37 MANUFACTURE STUDIO EFC-1 RB-2 EP-10 SAS-1 COLOR MATCH SAS-1 TO PT-1
37A COMPUTER LAB / EFC-1 RB-2 EP-10 SAS-1 COLOR MATCH SAS-1 TO PT-1
PRECISION INSPECTION
37B ELEC SC-1 RB-2 EP-10 PT-2
37C IT SC-1 RB-2 EP-10 PT-2
38 STEM & IT STUDIO VCT-1 RB-1 EP-10 ACT-1 DOOR TRIM, EP-3; DOOR PAINT, EP-4; DECORATIVE PAINT PER ELEVATIONS
39 DESIGN STUDIO VCT-1 RB-1 EP-10 ACT-1 DOOR TRIM, EP-3; DOOR PAINT, EP-4; DECORATIVE PAINT PER ELEVATIONS
39A ELEC ETR ETR ETR ETR
40 CLASSROOM VCT-5 RB-1 EP-2 ACT-1 DOORS AND TRIM, EP-1
41 CLASSROOM VCT-5 RB-1 EP-2 ACT-1 DOORS AND TRIM, EP-1
45 CLASSROOM VCT-5 RB-1 EP-2 ACT-1 DOORS AND TRIM, EP-1
45A TLT PFT-1 CWB-1 CWT-1* ACT-2 * DOOR TRIM PAINT, EP-1; INSTALL WALL TILE CWT-1, 2, 3, 4 PER PATTERN SHOWN ON ELEVATIONS
45C VESTIBULE VCT-5 RB-1 EP-2 ACT-1
55 CORRIDOR ETR / VCT-5 ETR* ETR* ETR* * MATCH ADJACENT EXISTING WHEREVER NEW WORK NECESSITATES TOUCH UP OF EXISTING
FINISHES
58 CORRIDOR VCT-1 RB-2 EP-5 ACT-1 DWG-X (VARIES) AS INDICATED ON DWGS; DOOR TRIM, EP-3; DOOR PAINT, EP-4; SOFFIT PAINT, EP-6
58A VESTIBULE VCT-2 RB-5 EP-6 ACT-1 DOORS AND TRIM, EP-1
59 CORRIDOR VCT-1 RB-2 ETR ACT-1 EXISTING TO REMAIN GLAZED BLOCK
2 ENLARGED FLOOR PATTERN PLAN
1/4" = 1'-0"
FINISH KEY NOTES - PLAN
F01 PATCH IN VCT-5 AS REQ'D; ALIGN SEAMS w/ EXISTING
F02 REFER TO ENLARGED FLOOR PATTERN PLANS FOR MORE
INFORMATION ABOUT COMPLEX FLOORING INSTALLATION
F03 BID ALTERNATE: NEW FLOORING; BASE BID: PATCH / REPAIR
ETR FLOORING AS REQUIRED
F04 BID ALTERNATE: WINDOW WALL GRAPHICS; BASE BID: ACCENT
EPOXY PAINT EP-7
1 1st FLOOR FINISH PLAN - PART C
1/8" = 1'-0"
1st FLOOR FINISH PLAN - PART C
Additions and Alterations: 10/31/2025
11 AADDDDEENNDDUUMM ##22 0066//0099//22002266
Jonathan Law High School Career Technology Education A211C
20 LANSDALE AVENUE ISSUED FOR BID - 05/29/2026 Phase 1 of 2
J. Lipset
MILFORD, CONNECTICUT 06460
#084-0217 EA
24.161