Gooseneck Trailers

Hackney or Mickey Rapid Response 18 Bay Trailer -OR APPROVED EQUAL- Trailer Structure *The Trailer shall be 100% aluminum construction, tapered with applicable: *One-piece aluminum roof, extruded top rail with integrated heavy duty drip molding *The Trailer shall have a heavy duty aluminum channel rear bumper with rubber dock pads *Tubular bottom rail and corner posts with single-casting rounded corner caps *Reinforcement straps at all top rail to mid-section joint *Single casting rounded corner caps *Reinforcement straps at all top rail joints Bays *Aircraft alloy interlocking aluminum extruded floor slats *Continuous welds floor to sides and bay back *Vertical interior channels to bay walls *Aluminum sheet bay interior *Machine die punched handgrips in partition covers *Drain holes shall be installed in each bay Bay Area Dimensions (Right & Left side of trailer total of 18 bays; approximate length of trailer is 496 inch) Bay 1 52Wide/68High Bay 2 52Wide/68High Bay 3 52Wide/100High Bay 4 52Wide/100High Bay 5 52Wide/100High Bay 6 52Wide/100High Bay 7 52Wide/68High Bay 8 52Wide/68High Bay 9 52Wide/100High Doors *Extruded aluminum door slats, EZ lift bottom door slat, Ergonomic lift intermediate slat *Door strap, rubber bumper stops, and snow plugs *Door seals Rubber bumper along the bottom, Fiber door seals each vertical side and across the top *Three sided replaceable ABS door track liner *EZ glide door rollers *Spring loaded counterbalances *Universal lock system: includes handle, lock cylinder, cylinder cover and padlock Running Gear *Axle 22,000# 5 dia. .58 wall, Haldex auto slack adjuster, synthetic lube, extended service brakes *Suspension Hutchens 9700 series, (3) leaf spring, 22,400# GAWR per axle *Kingpin Holland 2.00 dia. .38 plate thickness, Haldex/Midland ABS, Jost Landing gear 50K with sand shoe *Tires 11R-22.5, 16 ply, SmartWay verified, Wheels- 22.5x8.25 hub piloted, white powered coated, (10) stud, (5), handhold Other *Spring loaded, slip resistant, pin removable aluminum wheelhouse bar step *All FMVSS exterior LED lighting with additional rear upper T/T lights, sealed wiring harnesses *Three coat automotive quality paint process *The trailer shall be painted White *Z-Tech undercoating in kingpin & suspension *Kazoo Drain hole kit each bay *Pull out platform in bottom rail *Power handgrip per middle section *Provide a backup alarm on the trailer *Provide intermediate turn signals in the bottom rail *The trailer shall be equipped with mud flaps *The trailer shall be provided with EX off steps *The trailer shall have a Meritor air ride suspension with MTIS tandem axle *Adjustable holes for shelves 12 holes on 3 center increments *Scene lights wires ran to bay (1) one for C/I Generator *The trailer shall have two manual slide out trays in Bay 1 on both sides of the trailer *The trailer shall have two drop down shelves in any bay that is 52W/100High. NOTE: a total of 20 drop down shelves (Bay 3, 4, 5, 6 and 9 on both sides of trailer) *The trailer shall have an upper frame sheet Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly, and the successful bidder shall be required to deliver the brand/specification stated in the solicitation. *Shipping to be included in bid offer* Delivery: (Monday Friday 8:00am to 4:30pm) Vendor must arrange delivery with the agency prior to delivering.