STATEMENT OF WORK
FIREARMS PURCHASE
DEPARTMENT OF CONSERVATION & NATURAL RESOURCES
BUREAUS OF STATE PARKS & FORESTRY
I. SCOPE OF WORK:
The Commonwealth of Pennsylvania, Department of Conservation and Natural Resources
(DCNR) Bureaus of State Parks and Forestry, are issuing this Invitation for Bid (IFB) to
procure two hundred sixty-five (265) Glock G45Gen6 with Aimpoint COA
(P64550B02DC8A3) AND forty (40) Glock G43X AMGLO Bold firearms. The firearm
specifications and quantities are set forth in this Statement of Work. The only firearms that
will be accepted for this bid are the Glock G45 Gen6 with Aimpoint COA
(P64550B02DC8A3) and Glock G43X AMGLO Bold firearms.
This is a no substitution bid.
Bidders should only complete and return the required documents listed in Section VI. BID
AWARD in this SOW. Bidders should NOT attach any vendor quotes, Terms and Conditions,
or documents other than those requested in Section VI. Bid submissions may be negated if
additional attachments are submitted with the bid response. The Commonwealth's Terms
and Conditions are the only terms accepted for this procurement.
Questions regarding the technical aspects of this bid should be directed to Steve Anderson,
Ranger Operations Specialist at (717)787-8800 office, (223)488-1173 cell, or by email at
stevanders@pa.gov. Questions regarding the contracting or bidding aspects of this
solicitation should be directed to Jenna English at jenenglish@pa.gov or (717)787-3278.
II. CONTRACTOR REQUIREMENTS:
All Bidders must meet the following requirements to be eligible to bid:
A. Bidder must be a Glock dealer/distributor authorized to sell firearms to Pennsylvania
law enforcement,
B. Bidder must have a Federal Firearms License, and
C. Bidder must have a Pennsylvania Firearms License.
III. CONTRACTOR TASKS:
The following tasks shall be completed in performance of this contract:
A. FIREARMS: Provide firearms as specified below:
Date Delivery REQUIRED:
February 1st 2027
February 22nd 2027
March 8th 2027
April 5th 2027
April 26th 2027
Firearm:
Glock G45 Gen6
Glock G45 Gen6
Glock G45 Gen6
Glock G45 Gen6
Glock G45 Gen6
Glock G43X
Quantity
25
60
60
60
60
40
Delivery will be accepted before this date. This is the latest date delivery is acceptable.
1. DUTY GUNS (Quantity = 265)
Model: Glock G45 Gen6 with Aimpoint COA (P64550B02DC8A3)
Caliber: 9 MM
Capacity: 17+1
Barrel Length: 4.02”/102 mm
Overall Length: 7.44”
Weight: Empty (No Mag.) 23.10 oz/655g
Must include:
Three (3) Magazines
Trigger Locking Device
AIMPOINT COA
2. COMPACT DUTY GUNS (Quantity = 40)
Model: Glock G43X AMGLO bold
Caliber: 9 MM
Capacity: 10 +1
Barrel Length: 3.41“
Overall Length: 6.5”
Front Sight: AMGLO Bold
Rear Sight: AMGLO Bold
Weight: Empty (No Mag.) 23.07 oz/654 g
Must include:
Three (3) Magazines
Trigger Locking Device
B. FIREARMS TRADE-IN: As part of this Invitation for Bid, DCNR intends to trade in
their current firearms:
1. Two hundred sixty-five (265) Smith & Wesson M&P 40 M2.0 Law
Enforcement Only Full-Size Pistols, SKU#11519
2. thirty-five (35) Smith & Wesson M&P 40 Shield M2.0 Tritium Night Sights
Compact Size Firearms, SKU#11816
The Smith & Wesson firearms included in the trade-in were purchased in
2021.
The trade-in price for the used firearms shall be entered into Attachment A
and submitted along with the bid. The trade-in value shall be deducted from
the total bid price for the new firearms and training to determine the lowest
bid price. Trade-in information provided on Attachment A will be reviewed by
the Commonwealth’s State Surplus Property Division and approved or denied
as expeditiously as possible.
3. The firearms for trade-in shall be available beginning no sooner than January
31st, 2027. As new firearms are introduced and officers are trained, the
current models that are part of the trade-in will be transferred to the awarded
bidder for trade-in. Every effort will be made for a prompt turn-in of existing
firearms; the anticipated time for the transition of the firearms and training is
March 2027 – August 2027. Contractor must accept multiple batches of turn-
ins, with dates of turn-ins at the discretion of the Department. Contractor must
pick up firearms at a department selected facility within 15 days of notification
of Department.
4. For sixty (60) days following the receipt of the trade-in weapons by the
Contractor, DCNR officers shall have the opportunity to purchase from the
Contractor with their own funds, their previously issued service firearm (by
serial number) back from the Contractor at trade-in price, plus any fees
imposed by law or by the vendor for the proper transfer of the firearm to the
officer. The awarded Contractor shall ensure that the sale of the firearm to the
DCNR officer complies with all applicable State and Federal laws. Following
the sixty (60) day timeframe, the awarded Contractor may sell or otherwise
dispose of the firearms as provided by law.
IV. DELIVERY LOCATION:
The firearms shall be delivered fully assembled and duty ready. The awarded bidder shall
provide weapon serial numbers prior to shipment to the DCNR contact person listed below.
All shipping and handling fees shall be included in the unit price of the firearms.
The first twenty-five (25) firearms must be delivered by February 1st, 2027. Refer to Section
III. Contract Tasks within the Statement of Work for further delivery dates as well as firearm
types and totals for each date.
Contractor must contact Chris Hall, Ranger Operations Specialist at (570) 401-7150, or by
email at chrihall@pa.gov no less than seven (7) calendar days prior to delivery to coordinate
the delivery of the items.
Delivery Address:
Conservation Leadership Training Center
85 Youth Forestry Lane
White Haven, PA 18661
V. DELIVERY PERIOD:
Delivery will commence after receiving a fully executed purchase order and terminate
August 31, 2027.
VI. BID AWARD:
The following are requirements of this bid solicitation. Failure to comply with any of these
requirements could result in non-responsive determination and subsequent disqualification
for the Contractor. The Commonwealth reserves the right to include or remove any
requirements based on budgetary need.
The bidder must complete and include the following with the bid response:
A. The electronic Invitation for Bid to be found at www.pasupplierportal.state.pa.us
B. A fully executed Attachment A – Firearms Trade-In Sheet
C. A copy of the bidder’s authorization as a Glock Inc, Authorized Dealer/Distributor to
sell to law enforcement in PA.
D. A copy of the bidder’s Federal and Pennsylvania Firearms licensing.
E. A properly executed Reciprocal Limitations Act form that lists the state of
manufacture for any supplies procured
F. A properly executed Worker Protection and Investment Certification Form.
Please note that the Department will only accept bids out to two (2) points when entering
your pricing.
It shall be understood and agreed that any quantities listed in the Contract are estimated
only and may be increased or decreased in accordance with the actual requirements of the
Commonwealth and that the Commonwealth in accepting any bid or portion thereof,
contracts only and agrees to purchase only the materials and services in such quantities as
represent the actual requirements of the Commonwealth. The Commonwealth reserves the
right to purchase materials and services covered under the Contract through a separate
competitive procurement procedures, whenever Commonwealth deems it to be in its best
interest.
Bid will be awarded based on lowest total sum. In the event of a discrepancy between the
unit price and extension of figures, the unit price will prevail.
VII. PAYMENT TERMS:
Payment will be provided upon receipt of approved products and invoices. A final itemized
trade-in value must be included.
This contract will be paid by Automated Clearing House (ACH), commonly referred to as
direct deposit. Contractor should review Section V.23 CONTRACT-016.2 Automated
Clearing House (ACH) Payments of the Commonwealth’s Terms and Conditions for
complete details and contractor’s responsibilities.
VIII. RECEIPT AND OPENING OF BIDS:
Bids will be submitted via the PA Supplier Portal, to be found at
www.pasupplierportal.state.pa.us. Faxed, emailed and mailed bids will not be accepted.
No responsibility will be attached to any employee of the DCNR for the premature opening of,
or the failure to open, a bid for any reason whatsoever.
IX. INVOICES:
Invoice format shall be in accordance with the IFB – Invitation for Bid
All invoices for this contract MUST either be:
A. Emailed to the following for a Paperless Email Invoice Option: 69180@pa.gov
For information on the Commonwealth’s E-Invoicing Program, visit:
http://www.budget.pa.gov/Programs/Pages/E-Invoicing.aspx
B. Or mailed to the following address:
Commonwealth of PA – PO Invoice
PO Box 69180
Harrisburg PA 17106
A copy of the invoice(s) MUST also be sent to the following:
Steve Anderson: stevanders@pa.gov
Kristeen Young: kriyoung@pa.gov
All invoices MUST have the purchase order number and the SAP vendor Number included.
Also, the vendor’s name and address listed on the purchase order must be listed on each
invoice. Failure to provide this information may result in a delay of payment.
Please Note: Vendors are reminded to NOT include employer identification numbers, Social
Security Numbers, bank account information, or other personally identifiable information on
their invoices. That information is uniquely tied to your SAP Vendor Number and, for security
purposes, should not be explicitly stated on an invoice.
X. BID RESULTS:
Bidder can obtain bid results by accessing www.emarketplace.state.pa.us/.
The bid results will be posted as soon as practicable following the bid opening. The results
are the apparent bidders, and all bids are under review until final award of the purchase
order.
This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.