ARCHITECTURAL DESIGN AND CONSULTING SERVICES FOR THE TRENTON CARVER CENTER BUILDING 40 FOWLER ST.

Location: New Jersey
Posted: Oct 30, 2026
Due: Nov 5, 2026
Agency: City of Trenton
Type of Government: State & Local
Category:
  • C - Architect and Engineering Services - Construction
Solicitation No: RFP2026-31
Publication URL: To access bid details, please log in.
Bid Number: RFP2026-31
Bid Title: ARCHITECTURAL DESIGN AND CONSULTING SERVICES FOR THE TRENTON CARVER CENTER BUILDING 40 FOWLER ST.
Category: Health & Human Services
Status: Open
Description:

The City of Trenton is soliciting proposals through a fair and open process in accordance with N.J.S.A. 19:44A-20.4 et seq. for:

ARCHITECTURAL DESIGN AND CONSULTING SERVICES

FOR THE

TRENTON CARVER CENTER BUILDING, 40 FOWLER, TRENTON, NJ

This contract is being funded in whole or in part by the Community Development Block Grant Program (CDBG), provided by the U.S. Department of Housing and Urban Development (HUD). All federal CDBG requirements will apply to the contract. MBE/WBE firm or individuals and DBE firms or individuals are highly encouraged to apply.

PROPOSERS SHALL LOG ON TO A VIRTUAL PROPOSAL OPENING ON NOVEMBER 5, 2026, AT 11:00AM TO:

https://www.zoomgov.com/j/1653888789?pwd=6DUvTXv7EG6eHVaTQzUNGXmms7Myyn.1

This contract is being funded in whole or in part by the Community Development Block Grant Program (CDBG), provided by the U.S. Department of Housing and Urban Development (HUD). All federal CDBG requirements will apply to the contract. MBE/WBE firm or individuals and DBE firms or individuals are highly encouraged to apply.

The City of Trenton requires submission prior to NOVEMBER 5, 2026, AT 11:00 AM in City Hall Annex, Division of Purchasing, 1st floor, 319 East State Street, Trenton, New Jersey, 08608 to Ms. Isabel C. Garcia, QPA, Purchasing Agent, Division of Purchasing, 319 East State Street, Trenton, NJ 08608

Publication Date/Time:
10/23/2026 3:50 PM
Closing Date/Time:
11/5/2026 11:00 AM
Related Documents:

Attachment Preview

SOLICITATION FOR REQUEST FOR PROPOSALS
THROUGH A FAIR AND OPEN PROCESS IN ACCORDANCE WITH
2 CFR Part 200 and N.J.S.A. 19:44A-20.4 ET SEQ.
FOR
ARCHITECTURAL DESIGN AND CONSULTING SERVICES
FOR THE
TRENTON CARVER CENTER BUILDING
40 FOWLER ST.
FOR A PERIOD OF ONE (1) YEAR
FOR THE
CITY OF TRENTON
DEPARTMENT OF HEALTH AND HUMAN SERVICES
To be received on:
NOVEMBER 5, 2026, AT 11:00AM
DIVISION OF PURCHASING
RFP2026-31
This contract is being funded in whole or in part by the Community Development Block Grant Program
(CDBG), provided by the U.S. Department of Housing and Urban Development (HUD). All federal CDBG
requirements will apply to the contract. MBE/WBE firm or individuals and DBE firms or individuals are highly
encouraged to apply.

PROPOSER CHECK LIST
(REQUIRED WITH SUBMISSION OF PROPOSAL)
The following checklist is provided as assistance to the development of the proposal
Response. It in no way supersedes or replaces the requirements of the proposal.
Please initial on the lines below for each document/section attesting to the fact that
you have read and/or included the documents with your proposal.
Must Read and Initial
A. CITY OF TRENTON ACKNOWLEDGMENT OF RECEIPT OF ADDENDA (Mandatory) ________________
B. STATEMENT OF OWNERSHIP DISCLOSURE (Mandatory) ________________
C. NON-COLLUSION AFFIDAVIT (Mandatory) ________________
D. MANDATORY EQUAL EMPLOYMENT OPPORTUNITY LANGUAGE EXHIBIT A (Mandatory) ________________
E. AFFIRMATIVE ACTION REGULATIONS QUESTIONNAIRE (Mandatory) ________________
F. AMERICANS WITH DISABILITIES ACT OF 1990 (Mandatory) ________________
G. CERTIFICATION OF NON-DEBARMENT FOR FEDERAL GOVERNMENT CONTRACTS (Mandatory) ________________
H. POLITICAL CONTRIBUTION DISCLOSURE FORM (Mandatory) ______________
I. DISCLOSURE INVESTED ACTIVITIES IN IRAN (Prior to award) _______________
J. PROHIBITED INVESTED ACTIVITIES IN RUSSIA AND BELARUS (Prior to award) ________________
K. NEW JERSEY BUSINESS REGISTRATION CERTIFICATE (Prior to award) ________________
L. THREE (3) REFERENCES REQUIRED ________________
M. ETHICS COMPLAINT DISCLOSURE ________________
N. CITY OF TRENTON RESIDENT EMPLOYMENT POLICY ________________
O. PROPOSAL PAGE (Mandatory) ________________
PAGES MUST BE ONE-SIDED - DO NOT BIND, PROPOSERS DO NOT CHANGE ANY
FORMS
Proposers may visit the City of Trenton's Procurement Website bids and prior to
submitting sealed bid for any changes, addendums and cancellations at
www.trentonnj.org/bids
Legal advertisements are posted on the City's Procurement Website at
www.trentonnj.org/bids
RFP2026-31ARCHITECTURAL DESIGN AND CONSULTING SERVICES FOR THE TRENTON CARVER CENTER BUILDING 40 FOWLER ST.
FOR A PERIOD OF ONE (1) YEAR FOR THE CITY OF TRENTON, DEPARTMENT OF HEALTH AND HUMAN SERVICES - RFP OPENING
DATE 11/5/2026 AT 11:00AM 2

RESPONDENT'S PRICE PROPOSAL REQUIRED IN A SEPARATE SEALED ENVELOPE -
"PROPOSAL"
Federal Contract Provisions Certification ___________
System for Award Management ___________
Certification Regarding Lobbying ___________
RFP2026-31ARCHITECTURAL DESIGN AND CONSULTING SERVICES FOR THE TRENTON CARVER CENTER BUILDING 40 FOWLER ST.
FOR A PERIOD OF ONE (1) YEAR FOR THE CITY OF TRENTON, DEPARTMENT OF HEALTH AND HUMAN SERVICES - RFP OPENING
DATE 11/5/2026 AT 11:00AM 3

TABLE OF CONTENT
* Check list
* Table of Content
* Legal advertisement
* Register to do business with the City of Trenton
* Procurement forms
CITY OF TRENTON ACKNOWLEDGMENT OF RECEIPT OF ADDENDA
STATEMENT OF OWNERSHIP DISCLOSURE
NON-COLLUSION AFFIDAVIT
REQUIRED EVIDENCE AFFIRMATIVE ACTION REGULATIONS
EQUAL EMPLOYMENT OPPORTUNITY LANGUAGE (EXHIBIT A)
AMERICANS WITH DISABILITIES ACT OF 1990
CERTIFICATION OF NON-DEBARMENT FOR FEDERAL GOVERNMENT CONTRACTS
POLITICAL CONTRIBUTION DISCLOSURE FORM
DISCLOSURE OF INVESTMENT ACTIVITIES IN IRAN
CERTIFICATION OF NON-INVOLVEMENT IN PROHIBITED ACTIVITIES IN RUSSIA OR BELARUS
NEW JERSEY BUSINESS REGISTRATION CERTIFICATE
* Instructions for Proposers
* City of Trenton Resident Employment Policy
* City of Trenton Ethics Complaint Disclosure
* Scope of Services
* Proposal
PAGES MUST BE ONE-SIDED - DO NOT BIND
Please submit one (1) original signed copy and two (2) additional copies
Purchasing website. Proposers may visit the City of Trenton's Procurement Website prior to
submitting their sealed proposal for any changes, addendums and cancellations.
RFP2026-31ARCHITECTURAL DESIGN AND CONSULTING SERVICES FOR THE TRENTON CARVER CENTER BUILDING 40 FOWLER ST.
FOR A PERIOD OF ONE (1) YEAR FOR THE CITY OF TRENTON, DEPARTMENT OF HEALTH AND HUMAN SERVICES - RFP OPENING
DATE 11/5/2026 AT 11:00AM 4

CITY OF TRENTON
NOTICE OF REQUEST FOR PROPOSALS
RFP2026-31
The City of Trenton is soliciting proposals through a fair and open process in
accordance with N.J.S.A. 19:44A-20.4 et seq. for:
ARCHITECTURAL DESIGN AND CONSULTING SERVICES
FOR THE
TRENTON CARVER CENTER BUILDING, 40 FOWLER, TRENTON, NJ
This contract is being funded in whole or in part by the Community Development Block Grant
Program (CDBG), provided by the U.S. Department of Housing and Urban Development (HUD). All
federal CDBG requirements will apply to the contract. MBE/WBE firm or individuals and DBE firms or
individuals are highly encouraged to apply.
PROPOSERS SHALL LOG ON TO A VIRTUAL PROPOSAL OPENING ON NOVEMBER 5,
2026, AT 11:00AM TO:
https://www.zoomgov.com/j/1653888789?pwd=6DUvTXv7EG6eHVaTQzUNGXmms7
Myyn.1
This contract is being funded in whole or in part by the Community Development
Block Grant Program (CDBG), provided by the U.S. Department of Housing and
Urban Development (HUD). All federal CDBG requirements will apply to the
contract. MBE/WBE firm or individuals and DBE firms or individuals are highly
encouraged to apply.
The City of Trenton requires submission prior to NOVEMBER 5, 2026, AT 11:00 AM in
City Hall Annex, Division of Purchasing, 1st floor, 319 East State Street, Trenton, New
Jersey, 08608 to Ms. Isabel C. Garcia, QPA, Purchasing Agent, Division of Purchasing,
319 East State Street, Trenton, NJ 08608.
Scope of Services, Requirements, Evaluation Criteria and other proposal information
may be obtained on the City of Trenton's Procurement Website at
www.trentonnj.org/bids .
Proposers may visit the City of Trenton's website for any addenda/notices issued
prior to the request for proposal opening date at www.trentonnj.org/bids
Proposers shall comply with the requirements of P.L. 1975 C127. (N.J.S.A. 17:27et seq.)
City of Trenton 609-989-3139
Isabel C. Garcia, QP
RFP2026-31ARCHITECTURAL DESIGN AND CONSULTING SERVICES FOR THE TRENTON CARVER CENTER BUILDING 40 FOWLER ST.
FOR A PERIOD OF ONE (1) YEAR FOR THE CITY OF TRENTON, DEPARTMENT OF HEALTH AND HUMAN SERVICES - RFP OPENING
DATE 11/5/2026 AT 11:00AM 5

BUILD AMERICA, BUY AMERICA ACT (BABAA)
The Build America, Buy America Act (BABAA) was signed into law in November 2021 as part of the
Infrastructure Investment and Jobs Act. BABAA establishes a domestic content procurement
preference known as the "Buy America Preference" (BAP) for Federal infrastructure spending. In
general, BAP requires that all iron, steel, manufactured products, and construction materials used
in infrastructure projects funded with Federal financial assistance (FFA) must be produced in the
United States, unless a waiver is in place requiring otherwise. Bidders shall submit evidence of
materials produced in the United States as part of the submission.
BABAA CLAUSE FOR THE PROCUREMENT
DOCUMENTS AND CONTRACTS
All Build America, Buy America (BABAA) covered contracts and subcontracts, procurement
documents and solicitations must include the following clause:
Contractor shall comply with the Build America, Buy America Act Section 70912, enacted as part of
the Infrastructure Investment and Jobs Act (IIJA). Pub. L. 117-58. The Act establishes domestic
content procurement preference for infrastructure projects. (1) All iron and steel used in the
project are produced in the United States. This means all manufacturing processes, from the initial
melting stage through the application of coatings, occurred in the United States. (2) All
manufactured products and construction materials used in the project are produced in the United
States. This means the manufactured product was manufactured in the United States, and the cost
of the components of the manufactured product that are mined, produced, or manufactured in
the United States is greater than 55 percent of the total cost of all components of the
manufactured product, unless another standard for determining the minimum amount of
domestic content of the manufactured product has been established under applicable law or
regulation. 5 IIJA, 70923(a) & (b)(1). 6 OMB Memorandum M-21-26, Increasing Opportunities for
Domestic Sourcing and Reducing the Need for Waivers from Made in America Laws available at:
https://www.whitehouse.gov/wp-content/uploads/2020/11/M-21-06.pdf 7 For the purposes of
this guidance, a "Buy America" preference is a domestic content procurement preference as
defined in IIJA, 70912(2). 8 IIJA, 70912 (5) & (7). 9 See Appendix I: Example of Award Term -
Required Use of American Iron, Steel, Manufactured Products, and Construction Materials. 2 (3)
All construction materials are manufactured in the United States. This means that all
manufacturing processes for the construction material occurred in the United States.
Page | 50

Project Name
BIDDER COMPANY BIDDER COMPANY
NAME ADDRESS

BABAA BIDDER'S CERTIFICATION
Attach this form to all Bids for all HUD-assisted funding infrastructure projects.
Project Name
BIDDER COMPANY BIDDER COMPANY
NAME ADDRESS
PURPOSE: This Bidder Certification Form is used to certify that, as required by federal law, materials listed
in the bid(s) attached meet the requirements of the Build America, Buy America Act (BABAA), also known as
the Buy America Program (BAP).
The undersigned certifies that the iron, steel, manufactured products, and construction materials used in
any contract awarded under this bid proposal will meet BABAA requirements (if applicable), including:
Iron and Steel: All iron and steel used in the project are produced in the United States, meaning that all
manufacturing processes, from the initial melting stage through the application of coatings, occurred
in the United States.
Construction Materials: (Not applicable for 2023 and earlier funding) All construction materials
are manufactured in the United States, meaning that all manufacturing processes for the
construction material occurred in the United States. Minor additions of materials or binding
agents to a construction material do not change the categorization of the material.
Manufactured Products: (Not applicable to 2024 and earlier funding) All manufactured products
were produced in the United States. To be considered produced in the United Sates, the cost of
the components of the manufactured product that are mined, produced, or manufactured in the
United States is greater than 55% of the total cost of all components of the manufactured product,
unless another standard for determining the minimum amount of domestic content of the
manufactured product has been established under applicable law or regulation.
As a bidder for the project, I hereby certify that I have read, understand, and will comply with the Build
America, Buy America provisions as required by federal law and that the materials in the attached Bid meet
the requirements of the Build America, Buy America Act and accompanying guidance. Furthermore, I
understand that BABAA provisions apply to any and all portions of this project, including subcontracted
portions.
I also agree to provide a completed and signed BABAA Contractor/Subcontractor Certification with each
payment request to the Municipality/Agency along with documentation verifying the material meets all
requirements of BABAA.
I understand that a false statement on this Certification may be grounds for rejection or termination of any
contract.
Contractor Name:
Contractor Signature: Date:
Page | 51

Project Name
CONTRACTOR/ CONTRACT NUMBER
SUBCONTRACTOR NAME
CONTRACTOR/ INVOICED PERIOD
SUBCONTRACTOR INVOICED AMOUNT
ADDRESS

ATTACHMENT L - BABAA CONTRACTOR/SUBCONTRACTOR CERTIFICATION
Project Name
CONTRACTOR/ CONTRACT NUMBER
SUBCONTRACTOR NAME
CONTRACTOR/ INVOICED PERIOD
SUBCONTRACTOR INVOICED AMOUNT
ADDRESS
PURPOSE: This Contractor Buy America Certification form is used to certify that, as required by federal law,
materials listed meet the requirements of the Build America, Buy America Act (BABAA), also known as the
Buy America Program (BAP).
Contractors and Subcontractors must complete and sign a copy of this form and submit with each payment
request to the Municipality or Agency, along with receipts and/or other documentation showing evidence of
BABAA compliance. Evidence includes, but is not limited to, Made in the USA labels or product details
information labels with country of origin, or Manufacturer Certification Letters that confirm products used
for the infrastructure project comply with BABAA. Letters may include project name and location,
contract/project number, description of products and identify location of production.
The undersigned certifies that the iron, steel, manufactured products, and construction materials used in
this contract is in full compliance with the BABAA requirements (if applicable), including:
Iron and Steel: All iron and steel used in the project are produced in the United States, meaning that all
manufacturing processes, from the initial melting stage through the application of coatings, occurred
in the United States.
Construction Materials: (Not applicable to 2023 and earlier projects) All construction materials
are manufactured in the United States, meaning that all manufacturing processes for the
construction material occurred in the United States. Minor additions of materials or binding
agents to a construction material do not change the categorization of the material.
Manufactured Products: (Not applicable to 2024 and earlier projects) All manufactured products
were produced in the United States. To be considered produced in the United Sates, the cost of
the components of the manufactured product that are mined, produced, or manufactured in the
United States is greater than 55% of the total cost of all components of the manufactured product,
unless another standard for determining the minimum amount of domestic content of the
manufactured product has been established under applicable law or regulation.
I Certify that in accordance with the BABAAA requirements and absent an applicable waiver, all of the iron,
steel, manufactured products and construction materials used were produced in the United States.
Authorized Representative (Name):
Signature: Date:
Page | 52

*APPLICANT'S ORGANIZATION
*PRINTED NAME AND TITLE OF AUTHORIZED REPRESENTATIVE Prefix: * First Name: Middle Name: *Last Name: Suffix: *Title:
*SIGNATURE: Completed on submission to Grants.gov *DATE: Completed on submission to Grants.gov

OMB Number: 4040-0013
Expiration Date: 06/30/2028
CERTIFICATION REGARDING LOBBYING
Certification for Contracts, Grants, Loans, and Cooperative Agreements
The undersigned certifies, to the best of his or her knowledge and belief, that:
(1)No Federal appropriated funds have been paid or will be paid, by or on behalf of the undersigned, to any
person for influencing or attempting to influence an officer or employee of an agency, a Member of
Congress, an officer or employee of Congress, or an employee of a Member of Congress in connection with
the awarding of any Federal contract, the making of any Federal grant, the making of any Federal loan, the
entering into of any cooperative agreement, and the extension, continuation, renewal, amendment, or
modification of any Federal contract, grant, loan, or cooperative agreement.
(2)If any funds other than Federal appropriated funds have been paid or will be paid to any person for
influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an
officer or employee of Congress, or an employee of a Member of Congress in connection with this Federal
contract, grant, loan, or cooperative agreement, the undersigned shall complete and submit Standard
Form-LLL, ''Disclosure of Lobbying Activities,'' in accordance with its instructions.
(3)The undersigned shall require that the language of this certification be included in the award documents
for all subawards at all tiers (including subcontracts, subgrants, and contracts under grants, loans, and
cooperative agreements) and that all subrecipients shall certify and disclose accordingly. This certification
is a material representation of fact upon which reliance was placed when this transaction was made or
entered into. Submission of this certification is a prerequisite for making or entering into this transaction
imposed by section 1352, title 31, U.S. Code. Any person who fails to file the required certification shall be
subject to a civil penalty of not less than $10,000 and not more than $100,000 for each such failure.
Statement for Loan Guarantees and Loan Insurance
The undersigned states, to the best of his or her knowledge and belief, that:
If any funds have been paid or will be paid to any person for influencing or attempting to influence an officer
or employee of any agency, a Member of Congress, an officer or employee of Congress, or an employee of
a Member of Congress in connection with this commitment providing for the United States to insure or
guarantee a loan, the undersigned shall complete and submit Standard Form-LLL, ''Disclosure of Lobbying
Activities,'' in accordance with its instructions. Submission of this statement is a prerequisite for making or
entering into this transaction imposed by section 1352, title 31, U.S. Code. Any person who fails to file the
required statement shall be subject to a civil penalty of not less than $10,000 and not more than $100,000
for each such failure.
*APPLICANT'S ORGANIZATION
*PRINTED NAME AND TITLE OF AUTHORIZED REPRESENTATIVE
Prefix: * First Name: Middle Name:
*Last Name: Suffix:
*Title:
*SIGNATURE: Completed on submission to Grants.gov *DATE: Completed on submission to Grants.gov
6

(A) Contracts for more than the simplified acquisition threshold currently set at $150,000, which
is the inflation adjusted amount determined by the Civilian Agency Acquisition Council and the
Defense Acquisition Regulations Council (Councils) as authorized by 41 U.S.C. 1908, must
address administrative, contractual, or legal remedies in instances where contractors
violate or breach contract terms, and provide for such sanctions and penalties as
appropriate.
(B) All contracts in excess of $10,000 must address termination for cause and for convenience
by the non-Federal entity including the manner by which it will be effected and the basis for
settlement.
1. Termination of Contract for Cause. If, through any cause, the Contractor shall fail to
fulfill in a timely and proper manner his obligations under this Contract, or if the Contractor
shall violate any of the covenants, agreements, or stipulations of this Contract, the Public
Body shall thereupon have the right to terminate this Contract by giving written notice to
the Contractor of such termination and specifying the effective date thereof, at least five
days before the effective date of such termination. In such event, all finished or unfinished
documents, data, studies, surveys, drawings, maps, models, photographs and reports
prepared by the Contractor under this Contract shall, at the option of the Public Body,
become its property and the Contractor shall be entitled to receive just and equitable
compensation for any work satisfactorily completed hereunder.
Notwithstanding the above, the Contractor shall not be relieved of liability to the Public
Body for damages sustained by the Public Body by virtue of any breach of the Contract
by the Contractor, and the Public Body may withhold any payments to the Contractor for
the purpose of set-off until such time as the exact amount of damages due the Public Body
from the Contractor is determined.
2. Termination for Convenience of the Public Body. The Public Body may terminate this
Contract at any time by giving at least ten (10) days notice in writing to the Contractor. If
the Contract is terminated by the Public Body as provided herein, the Contractor will be
paid for the time provided and expenses incurred up to the termination date. If this
Contract is terminated due to the fault of the Contractor, Paragraph 1 hereof relative to
termination shall apply.
(C) Equal Employment Opportunity. (applicable to all construction contracts over $10,000)
During the performance of this Contract, the Contractor agrees to comply with Executive
Order 11246 of September 24, 1965, entitled "Equal Employment Opportunity," as
amended by Executive Order 11375 of October 13, 1967, and as supplemented in
Department of Labor regulations (41 CFR chapter 60) as follows:
a. The Contractor will not discriminate against any employee or applicant for
employment because of race, religion, sex, color, or national origin. The
Contractor will take affirmative action to ensure that applicants are employed, and
that employees are treated during employment without regard to their race,
religion, sex, color, or national origin. Such action shall include, but not be limited
to the following: Employment, upgrading, demotion, or transfer; recruitment or
recruitment advertising; layoff or termination; rates of pay or other forms of
compensation; and selection for training, including apprenticeship. The Contractor
agrees to post in conspicuous places, available to employees and applicants for
7

This is the opportunity summary page. It provides an overview of this opportunity and a preview of the attached documentation.
Daily notification on new contract opportunities

With GovernmentContracts, you can:

  • Find more opportunities and win more business
  • Receive daily alerts for all new bid opportunities
  • Get contract opportunities matched to your business
ONE WEEK FREE TRIAL

See also

contract no type title category opening date status awarded to details 2027-15PS Professional

Township of Old Bridge

Bid Due: 12/03/2026

Bid Title: RFP 2027 Planner - Planning Board Category: Planning Board Status: Open

Harrison township

Bid Due: 12/03/2026

Planning/Zoning Board Engineer

Collingswood borough

Bid Due: 11/19/2026

Bid Number: 2026 RFP Monument Display Bid Title: RFP - DESIGN FABRICATION DELIVERY

Paramus borough

Bid Due: 12/08/2026

* Disclaimer: Information regarding bids, requests for proposals (RFPs), or requests for qualifications (RFQs) is provided on this website only for convenience and does not constitute official public notice. Persons wishing to respond to or inquire about bids, RFPs, or RFQs should contact the appropriate government department.