Sources Sought for Laser-Based 3D Tracking and 3D Scanning Metrology Instrument

Active

Contract Opportunity

NOTICE ID NO. NIST-SSN-25-7301557

Title: Sources Sought Notice for a Laser-Based 3D Tracking and 3D Scanning Metrology Instrument

The purpose of this sources sought notice is to conduct market research and identify potential sources of commercial products/services that satisfy the Government’s anticipated needs.

BACKGROUND

The National Institute of Standards and Technology (NIST) Engineering Laboratory Intelligent Systems Division (ISD) performs research to develop standards for robots and robot systems for manufacturing, emergency response, and industrial and on-road automated vehicles.

The NIST ISD requires a single, portable, instrument for use in planned common coordinate frame system research experiments. The instrument must be able to perform both reflector and reflector-less 3D measurements to achieve NIST’s requirements for obtaining ground-truth information and high-throughput 3D data.

CAPABILITIES SOUGHT

NIST is seeking information from sources that may be capable of providing a single, portable, laboratory instrument that will achieve the following objectives:

1. Able to operate both as a laser tracker (reflector measurements) with spherically-mounted retroreflectors (SMRs) and operate as a scanner (reflector-less measurements) to obtain point cloud data of surfaces without the need for SMRs.


2. Able to achieve the following while performing reflector measurement:
   
   
   
   • Must be capable of tracking a spherically-mounted retroreflector (SMR) at a distance of up to 80 meters or farther and 0.8 m or closer.
   
   
   • Must have a maximum permissible error (MPE) for angular accuracy of ± 15 µm + 6 µm/m or lower, according to ISO 10360-10:2016
   
   
   • The MPE of length Measurement (EUni:0:LT,MPE) must be ± 100 µm, according to ISO 10360-10:2016 Chapter 6.4, Table 4, positions 1 to 35.
   
   
   • Must have a field of view of 360° in the horizontal plane.
   
   
   • Must have a field of view of ±145° or larger in the vertical plane.
   
   
   
   


3. Able to achieve the following while performing reflector-less measurement:
   
   
   
   • Must be capable of obtaining scans of surfaces that are at a distance of up to 60 meters or farther, and 1.5 meters or closer.
   
   
   • Must have an absolute accuracy of ±300 μm or lower of MPE of the absolute position of a planar target of 78% albedo, placed anywhere between 1.5 m to 30 m away and anywhere between 0° to ±45° angle.
   
   
   • Must have the following specifications per ASTM E3125-17:
     
     
     
     1. Angular performance of ±50 µm + 10 µm/m (Etwo-face,MPE)
     
     
     2. Length measurement error of ± 150 μm (Edistance,MPE, per ASTM E3125-17 tables 2, 3, & 4)
     
     
     
     
   
   
   • Must have a field of view of 360° in the horizontal plane.
   
   
   • Must have a field of view of ±145° or larger in the vertical plane.
   
   
   
   


4. Portable and battery powered.


5. The power output of the system lasers must not exceed that of a Class 2 Laser Product in accordance with IEC 60825-1 Second Edition (2014-05).

HOW TO RESPOND TO THIS NOTICE

In responding to this notice, please DO NOT PROVIDE PROPRIETARY INFORMATION.

Submit the response by email to the Primary Point of Contact listed in this notice as soon as possible, and preferably before the closing date and time of this notice. Please note that to be considered for award under any official solicitation, the entity must be registered and “active” in SAM at the time of solicitation response.

Please include only the following information, readable in either Microsoft Word 365, Microsoft Excel 365, or .pdf format, in the response:

• Provide the complete name of your company, address, name of contact for follow-up questions, their email, their phone number and, if your company has an active registration in https://sam.gov, your company’s Unique Entity ID (UEI).

• Identify the equipment that your company sells that can meet the objectives addressed in this notice. For each product recommended to meet the Government’s requirement, provide the following:
  
  
  
  • Manufacturer name
  
  
  • Model number
  
  
  • Technical specifications
  
  
  • If your company is not the manufacturer, provide information on your company’s status as an authorized reseller of the product(s)
  
  
  
  

• Describe performance capabilities of the product(s) your company recommends to meet the Government’s requirements. Additionally, if there are other features or functions that you believe would assist NIST in meeting its objectives described above, please discuss in your response.
  
  
  
  • Discuss whether the equipment that your company sells and which you describe in your response to this notice may be customized to specifications and indicate any limits to customization.
  
  
  
  

• Identify any aspects of the NIST market research notice, including instructions, and draft minimum specifications that you cannot meet and state why. Please offer suggestions for how the market research notice and draft minimum specifications could be made more competitive.

• State whether the proposed equipment is manufactured in the United States and, if not, state the name of the country where the equipment is manufactured.

• Identify any plans/possibilities for changes in manufacturing location of the aforementioned equipment and provide relevant details, including timeline.

• For the NAICS code listed in this notice:

• 
  
  
  
  • Indicate whether your company is (a) a small business or (b) other than small business. See the Table of Small Business Size Standards and the associated .pdf download file for small business size standards and additional information.
  
  
  
  

• 
  
  
  
  • If you believe the NAICS code listed in this notice is not the best NAICS code for the type of product addressed in this notice, identify an alternative NAICS code that you believe would be more appropriate for the planned procurement.
  
  
  
  

• Describe services that are available with the purchase of the aforementioned equipment from your company such as installation, training, and equipment maintenance.

• Describe standard terms and conditions of sale offered by your company for the recommended equipment such as: delivery time after your company accepts the order; FOB shipping terms; manufacturer warranty (including details regarding nature and duration); if available, description(s) of available extended warranty; equipment setup and test; operator and service instruction manual(s); cleanup after installation; and if applicable, other offered services. Provide a copy of manufacturer standard terms and conditions that typically relate to the sale of the specified equipment, if available.

• State published price, discount, or rebate arrangements for recommended equipment and/or provide link to access company’s published prices for equipment and services.

• If the recommended equipment and related services are available for purchase on any existing Federal Supply Schedule contract(s) or other contracts against which NIST may be able to place orders, identify the contract number(s) and other relevant information.

• Identify any customers in the public or private sectors to which you provided the recommended or similar equipment. Include customer(s) information: company name, phone number, point of contact, email address.

• Provide any other information that you believe would be valuable for NIST to know as part of its market research for this requirement.

• State if you require NIST to provide additional information to improve your understanding of the government’s requirement and/or would like to meet with NIST representatives to discuss the requirement and the capabilities of the identified equipment.

QUESTIONS REGARDING THIS NOTICE

Questions regarding this notice may be submitted via email to the Primary Point of Contact listed in this notice. Questions should be submitted so that they are received by May 6, 2025. If the Contracting Officer determines that providing a written amendment to this notice to document question(s) received would benefit other potential respondents, the questions would be anonymized, and a written response to such question(s) would be provided via an amendment to this notice.

IMPORTANT NOTES

This notice is for market research purposes and should not be construed as a commitment by NIST to issue a solicitation or ultimately award a contract. There is no solicitation available at this time.

This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response.

NIST reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate.

Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability.

Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.

After a review of the responses received, a synopsis and solicitation may be published on GSA’s eBuy or SAM.gov. However, responses to this notice will not be considered an adequate response to any such solicitation(s).

The responses shall not exceed six (6) pages including all attachments, charts, etc.

Thank you for taking the time to submit a response to this request!

Attachments/Links