Dept. Of Agriculture - Animal Industry - Euthanasia Chambers/Tanks

The Alabama Department Of Agriculture and Industries is seeking quotes to build four (4) custom euthanasia chambers/tanks for the mass depopulation of poultry in the event of an animal disease outbreak.  Vendors who need assistance with submitting their bid electronicly may contact the Alabama Buys helpdesk at (334) 353-0700.
Items Requested: Four (4) Custom Euthanasia Chambers/Tanks

Dimensions : 62 inches x 48 inches x 24 inches

Interior Volume : 41 Cubic Feet

* **Note: The four (4) custom euthanasia chambers/tanks must be built and delivered by May 31, 2026***

Delivery Address: Alabama Department Of Agriculture and Industries, Richard Beard Building, 1445 Federal Drive, Montgomery, AL 36107.

Pricing must include the following:

(1) Ordering and Picking Up All Material
(2) Cutting and Preparing Material For Fabrication and Welding
(3) Tig Weld Box Frames
(4) Tig Weld Door Frames
(5) Tig Weld Gas Ports
(6) Tig Weld One Way Top Vent
(7) Drilling and Tapping Of Gas Ports
(8) Installation Of Tape On Box and Door Frames
(9) Installation Of Aluminum Sheet On Box And Door Frames
(10) Installation Of Door Hinges
(11) Installation Of Door Locking Hardware
(12) Installation Of One Way Vents
(13) Application Of Silicone To All Joints For Air Tight Seal
(14) Installation Of Weatherstrip Door Seals
(15) Installation Of Plastic Door Guard

4 Custom Euthanasia Chambers/Tanks @ $___________ Each

Total: $__________
Point Of Contact: Allie Grooms (334) 240-7315 or Dr. Misty Edmondson (334) 240-7217

Note To Supplier: Model/Part Number and Descriptive Literature

The brands and model numbers referenced provide a level of quality, and unless otherwise specified, are not restrictive. Suppliers quoting alternate items must provide a complete model/part number as well as descriptive/technical literature for consideration and evaluation with their quote. Reference to literature with a previous solicitation will not satisfy this requirement.  Failure to provide the required literature may result in the rejection of the supplier’s response.