City of Craig
300 W 4th Street
Craig, Colorado 81625
Road and Bridge Department
Technical Specifications
1-Ton 4 x 4 Single Cab Pickup with Factory 8-foot Bed
This specification describes the requirements for a 1-ton, four-wheel drive, single rear wheel pickup. The
unit must be safe and efficient to operate and built strong and durable enough for heavy-duty operation
over extended periods of time in a municipal setting. All standard equipment as shown in the
manufacturer’s printed literature must be included in the bid, plus any modifications to meet OSHA federal
and state regulations in all respects. The unit must be new and of the manufacturer’s current model year
in production at the time of delivery, and not a model to be phased out of production. It is stressed that
what follows are minimum specifications and while they mention only the salient descriptive points of the
unit, they do not exclude any major or minor items not specifically mentioned, but which would normally
and reasonably be necessary for proper, safe, efficient, and beneficial use and ownership.
Bidding instructions:
A. Each technical item of these specifications shall be individually annotated by the bidder in the first
column provided on the sheet with one of the following statements:
1. meets
2. exceeds
3. does not meet
4. not applicable
B. If any item is marked “exceeds”, “does not meet”, or “not applicable”, details must be given in the
second column provided, along with each entry describing what exactly is being bid.
C. The individual cost of each item of the specifications must also be annotated if its cost has not been
included in the basic bid price.
D. Complete printed literature, publications, and photograph of the unit proposed must be included with
each bid.
The vendor will please indicate the make, model, year and type of 1 Ton Pickup offered:
______________________________________________________________________________
______________________________________________________________________________
The vendor will please indicate the location (country) where the 1 Ton Pickup offered was originally
manufactured:
_____________________________________________________________________________
_____________________________________________________________________________
Description
Model
1-ton 4x4 pickup
Factory 8 ft. bed
Back up camera
Single rear wheels
Gear shifter on steering column
Engine
Gasoline - 6.0 liter/minimum
134a Refrigerant
Ratio
3.73 Ratio
Limited slip rear axle
Tires
Four mud and snow radials
One spare tire and wheel
Cab
Standard cab
Custom Cloth heavy-duty seat with fold down console in
middle of seat
Gauges
AM/FM stereo
Vinyl door panels
Delay wipers
Air conditioning & heater
Cup Holders
Tilt steering wheel
Electric windows
Cruise control
2 power point’s
Other
High output alternator
Heavy-duty radiator
Engine oil cooler
Transmission oil cooler
Engine block heater
Transfer case and engine skid plates
Solid color, White in color
Halogen headlights
Fuel tank (36 gallons minimum)
4-wheel drive anti-lock disc brakes
Front frame mounted recovery hooks
Two speed transfer case, shift on the fly
Stainless steel exhaust system
Electric brake control unit installed in dash
Trailer towing package with class IV receiver
hitch including complete wiring to rear with plug
Front license plate bracket
Front and rear bumper
No locking hubs
Compliance
Deviation