LED Blinker Signs and Replacement Parts - Federal
| Location: | Kentucky |
|---|---|
| Posted: | Aug 3, 2026 |
| Due: | Sep 1, 2026 |
| Agency: | State Government of Kentucky |
| Type of Government: | State & Local |
| Category: |
|
| Solicitation No: | RFB-605-2700000055-1 |
| Publication URL: | To access bid details, please log in. |
| General Information | |
| Document ID | RFB-605-2700000055-1 |
| Status | Open |
| Description | LED Blinker Signs and Replacement Parts - Federal |
| Department | Transportation - Office Of The Secretary |
| Type | Request for Bids (RFB) |
| Issue Date | 08/03/2026 12:00 AM EDT |
| Closing Date | 09/01/2026 01:30 PM EDT |
| Buyer Name | LATASHA CHENAULT |
| Buyer Email | latasha.chenault@KY.GOV |
| Buyer Phone | 502-782-5673 |
| Location | Bid Receiving, See Terms & Conditions for Bid Submission Instructions, Other, KY |
| Commodity Codes | ||
| Code | Description | Extended Description |
| 80183 | Signs, Metal (Not Blanks) |
36" Stop Sign Solar Powered
***ONLY ONLINE BIDS WILL BE ACCEPTED FOR THIS RFB.*** Emailed and hard copies delivered by any method WILL NOT BE ACCEPTED. See attached document How to Respond to an Online Bid through the Kentucky Vendor Self Service site (updated).pdf. Please enter contact person, phone number and email in the Comments Section. Vendors should review and update, if necessary, all addresses and contact persons for their account prior to bid submission. This information will carry forward to a contract if awarded, therefore please ensure all information is correct. The size of the flashing sign shall be 36-inch Stop (R1-1) Sign Solar Powered conforming to 2023 Federal Highway MUTCD (Manual on Uniform Traffic Control Devices). |
| 80183 | Signs, Metal (Not Blanks) |
48" Stop Sign Solar Powered
The size of the flashing sign shall be 48-inch Stop (R1-1) Sign Solar Powered conforming to 2023 Federal Highway MUTCD (Manual on Uniform Traffic Control Devices). |
| 80183 | Signs, Metal (Not Blanks) |
36" Yield Sign Solar Powered
The size of the flashing sign shall be 36-inch Yield (R1-2) Sign Solar Powered conforming to 2023 Federal Highway MUTCD (Manual on Uniform Traffic Control Devices). |
| 80183 | Signs, Metal (Not Blanks) |
48" Yield Sign Solar Powered
The size of the flashing sign shall be 48-inch Yield (R1-2) Sign Solar Powered conforming to 2023 Federal Highway MUTCD (Manual on Uniform Traffic Control Devices). |
| 80183 | Signs, Metal (Not Blanks) |
36" Grade Crossing Solar Powered
The size of the flashing sign shall be 36-inch Grade Crossing (W10-1) Sign Solar Powered conforming to 2023 Federal Highway MUTCD (Manual on Uniform Traffic Control Devices). |
| 80183 | Signs, Metal (Not Blanks) |
36" Warning Signs Solar Powered
The size of the flashing sign shall be 36-inch Warning Sign Solar Powered. Any warning signs listed in the 2023 Federal Highway MUTCD (Manual on Uniform Traffic Control Devices). |
| 80183 | Signs, Metal (Not Blanks) |
48" Warning Signs Solar Powered
The size of the flashing sign shall be 48-inch Warning Sign Solar Powered. Any warning signs listed in the 2023 Federal Highway MUTCD (Manual on Uniform Traffic Control Devices), or latest edition. |
| 80183 | Signs, Metal (Not Blanks) |
36" Stop Sign 110 Volts
The size of the flashing sign shall be 36-inch Stop (R1-1) Sign 110 volt conforming to 2023 Federal Highway MUTCD (Manual on Uniform Traffic Control Devices). |
| 80183 | Signs, Metal (Not Blanks) |
48" Stop Sign 110 Volts
The size of the flashing sign shall be 48-inch Stop (R1-1) Sign 110 volt conforming to 2023 Federal Highway MUTCD (Manual on Uniform Traffic Control Devices). |
| 80183 | Signs, Metal (Not Blanks) |
36" Grade Crossing 110 Volts
The size of the flashing sign shall be 36-inch Grade Crossing sign 110 volt conforming to 2023 Federal Highway MUTCD (Manual on Uniform Traffic Control Devices). |
| 80183 | Signs, Metal (Not Blanks) |
36" Warning Signs 110 Volts
The size of the flashing sign shall be 36-inch Warning Sign 110 volt. Any warning signs listed in the 2023 Federal Highway MUTCD (Manual on Uniform Traffic Control Devices). |
| 80183 | Signs, Metal (Not Blanks) |
48" Warning Signs 110 Volts
The size of the flashing sign shall be 48 inch Warning Sign 110 volt. Any warning signs listed in the MUTCD (Manual on Uniform Traffic Control Devices), or latest edition. |
| 80183 | Signs, Metal (Not Blanks) | 36" Replacement Signs for Solar Powered signs |
| 80183 | Signs, Metal (Not Blanks) | 48" replacement signs for solar powered signs. |
| 80183 | Signs, Metal (Not Blanks) | 36" replacement signs for 110 Volts |
| 80183 | Signs, Metal (Not Blanks) | 48" replacement signs for 110 Volts |
| 80183 | Signs, Metal (Not Blanks) |
Battery/Controller Kit for Solar Sign
Replacement battery and controller kit for 5 circuits |
| 80183 | Signs, Metal (Not Blanks) |
110 volt power supply/controller kit
replacement power supply/controller kits for 5 circuits |
| 80183 | Signs, Metal (Not Blanks) | Time clock (Solar) |
| 80183 | Signs, Metal (Not Blanks) | Time Clock (110 Volt) |
| 80183 | Signs, Metal (Not Blanks) | Solar Panel |
| 80183 | Signs, Metal (Not Blanks) | Charger for Battery (Solar) |
| 80183 | Signs, Metal (Not Blanks) | Wireless radio for remote sign activation |
| 80183 | Signs, Metal (Not Blanks) | Push button with wireless radio |
| 80183 | Signs, Metal (Not Blanks) |
Push Button
Push Button shall be able to connect for solar or 110 Volt. |
| 80183 | Signs, Metal (Not Blanks) |
Bollards for Pedestrian Activation System
There shall be 4 bollards that are wireless and battery powered. They shall include motion detector to activate LED sign. This should include anchors for mounting on concrete or in dirt. |
| 80183 | Signs, Metal (Not Blanks) | Replacement Bollard for ped activation system. |
| 80183 | Signs, Metal (Not Blanks) | Replacement battery for bollard |
| 80183 | Signs, Metal (Not Blanks) | Replacement sensor for Bollard |
| 80183 | Signs, Metal (Not Blanks) |
Pedestrian Motion Detector-110 volt
Shall include mounting and pedestrian pedestal or signpost. Shall be able to activate LED sign. |
| 80183 | Signs, Metal (Not Blanks) |
Pedestrian Motion Detector-solar powered
shall include mounting and pedestrian pedestal or sign post. Shall be able to activate LED sign |
| 80183 | Signs, Metal (Not Blanks) |
Vehicle Motion Detector-110 volt
Shall include mounting and pedestrian pedestal or sign post. Shall be able to activate LED sign |
| 80183 | Signs, Metal (Not Blanks) |
Vehicle Motion Detector-solar powered
Shall include mounting and pedestrian pedestal or sign post. Shall be able to activate LED sign |
| 80183 | Signs, Metal (Not Blanks) |
RRFB-Sign Panel with mounting hardware
Light bar used in both the AC or solar application and banding mount with snap locks for 2.375 + OD pole. |
| 80183 | Signs, Metal (Not Blanks) |
RRFB-Solar and Cabinet
This shall include a 3R aluminum cabinet with Corbin #2 key, mounting for wood pole, solar controller, radio modem for communication to another RRFB, battery, and solar panel. |
| 80183 | Signs, Metal (Not Blanks) |
RRFB- AC Controller and Cabinet
This shall include a 3R aluminum Cabinet with Corbin #2 key, Mounting for wood pole, Controller (for up to 3 RRFB), and radio for communication to another RRFB. |
| 80183 | Signs, Metal (Not Blanks) |
36" Yield Sign 110 Volts
The size of the flashing sign shall be 36 inch Yield (R1-2) Sign 110 volt conforming to 2009 Federal Highway MUTCD (Manual on Uniform Traffic Control Devices). |
| 80183 | Signs, Metal (Not Blanks) |
48" Yield Sign 110 Volts
The size of the flashing sign shall be 48 inch Yield (R1-2) Sign 110 volt conforming to 2009 Federal Highway MUTCD (Manual on Uniform Traffic Control Devices). |
| 80183 | Signs, Metal (Not Blanks) |
Blinker Sign 36" X 48"
W-8L, Left Chevron |
| 80183 | Signs, Metal (Not Blanks) |
Single Chevron mounting bracket
Single chevron ruggedized mounting bracket |
Daily notification on new contract opportunities
With GovernmentContracts, you can:
- Find more opportunities and win more business
- Receive daily alerts for all new bid opportunities
- Get contract opportunities matched to your business
See also
Project: RFP for the Pioneer Village WQTC Expansion CMAR Project Ref. #: 26-0813
Louisville & Jefferson County Metropolitan Sewer District
Bid Due: 8/13/2026
Follow Army Trademark Licensing Program Active Contract Opportunity Notice ID W9124D26QA135 Related Notice
DEPT OF DEFENSE
Bid Due: 8/10/2026
Follow Forestry Track Loader Active Contract Opportunity Notice ID W911S226U3842 Related Notice Department/Ind.
DEPT OF DEFENSE
Bid Due: 8/04/2026
Vanceburg Water Loss Project 7.28.26 ADVERTISEMENT FOR REQUEST FOR QUALIFICATIONS The City of
Buffalo Trace Area Development District
Bid Due: 8/14/2026
* Disclaimer: Information regarding bids, requests for proposals (RFPs), or requests for qualifications (RFQs) is provided on this website only for convenience and does not constitute official public notice. Persons wishing to respond to or inquire about bids, RFPs, or RFQs should contact the appropriate government department.