Annual DI Pipe & Fittings 2026-27

Sealed bids will be received until 2:00 p.m. E.D.T. on Thursday, May 21, 2026, at the Purchasing Office, City Hall, 135 E. Maumee Street, Adrian, Michigan 49221, for the purchase of D.I. Pipe and fittings to be purchased for the period beginning July 1, 2026 through June 30, 2027. Quantities are estimates only and will be ordered on an as needed basis. Specifications are attached.

Est. Qty. Product Unit Price TOTAL

PIPE

100 feet 4” Class 52 Ductile Iron Pipe $____________ $_____________

400 feet 6” Class 52 Ductile Iron Pipe $____________ $_____________

1000 feet 8” Class 52 Ductile Iron Pipe $____________ $_____________

500 feet 10” Class 52 Ductile Iron Pipe $____________ $_____________

1000 feet 12” Class 52 Ductile Iron Pipe $____________ $_____________

100 feet 16” Class 52 Ductile Iron Pipe $____________ $_____________

M.J. D.I. Fittings

12 each 6” x 18” Anchor Coupling $____________ $_____________

2 each 6” Anchor 90 Deg. Bend $____________ $_____________

8 each 6” 45 Deg. Bend $____________ $_____________

4 each 6” 90 Deg. Bend $____________ $_____________

4 each 6” 22.5 Deg. Bend $____________ $_____________

6 each 8” 45 Deg. Bend $____________ $_____________

2 each 8” 90 Deg. Bend $____________ $_____________

4 each 8” 22.5 Deg. Bend $____________ $_____________

2 each 10” 45 Deg. Bend $____________ $_____________

2 each 10” 90 Deg. Bend $____________ $_____________

4 each 10” 22.5 Deg. Bend $____________ $_____________

2 each 12” 90 Deg. Bend $____________ $_____________

2 each 12” 45 Deg. Bend $____________ $_____________

2 each 12” 22.5 Deg. Bend $____________ $_____________

M.J. D.I. Fittings (continued)

2 each 16” 90 Deg. Bend $____________ $_____________

4 each 16” 45 Deg. Bend $____________ $_____________

4 each 16” 22.5 Deg. Bend $____________ $_____________

2 each 4” x 6” Reducer $____________ $_____________

2 each 6” x 8” Reducer $____________ $_____________

1 each 10” x 8” Reducer $____________ $_____________

1 each 12” x 10” Reducer $____________ $_____________

2 each 4” x 4” Tee $____________ $_____________

2 each 6” x 4” Tee $____________ $_____________

2 each 6” x 6” Tee $____________ $_____________

2 each 8” x 6” Tee $____________ $_____________

2 each 8” x 8” Tee $____________ $_____________

4 each 12” x 8” Tee $____________ $_____________

2 each 12” x 10” Tee $____________ $_____________

4 each 12” x 6” Tee $____________ $_____________

4 each 16” x 6” Tee $____________ $_____________

2 each 4” DUAL Solid Sleeve $____________ $_____________

2 each 6” DUAL Solid Sleeve $____________ $_____________

2 each 8” DUAL Solid Sleeve $____________ $_____________

2 each 10” DUAL Solid Sleeve $____________ $_____________

2 each 12” DUAL Solid Sleeve $____________ $_____________

2 each 16” DUAL Solid Sleeve $____________ $_____________

2 each 4” DUAL Cut-in Sleeve $____________ $_____________

2 each 6” DUAL Cut-in Sleeve $____________ $_____________

2 each 8” DUAL Cut-in Sleeve $____________ $_____________

2 each 10” DUAL Cut-in Sleeve $____________ $_____________

2 each 12” DUAL Cut-in Sleeve $____________ $_____________

2 each 4” Bell Leak Clamp $____________ $_____________

2 each 6” Bell Leak Clamp $____________ $_____________

2 each 8” Bell Leak Clamp $____________ $_____________

2 each 10” Bell Leak Clamp $____________ $_____________

2 each 12” Bell Leak Clamp $____________ $_____________

2 each 16” Bell Leak Clamp $____________ $_____________

M.J. Valves

2 each 2” Resilient Wedge Gate Valve $____________ $_____________

2 each 4” Resilient Wedge Gate Valve $____________ $_____________

8 each 6” Resilient Wedge Gate Valve $____________ $_____________

4 each 8” Resilient Wedge Gate Valve $____________ $_____________

2 each 10” Resilient Wedge Gate Valve $____________ $_____________

2 each 12” Resilient Wedge Gate Valve $____________ $_____________

1 each 16” Resilient Wedge Gate Valve $____________ $_____________

M.J. Tapping Valves

2 each 2” Resilient Wedge Gate Valve $____________ $_____________

2 each 4” Resilient Wedge Gate Valve $____________ $_____________

4 each 6” Resilient Wedge Gate Valve $____________ $_____________

4 each 8” Resilient Wedge Gate Valve $____________ $_____________

4 each 10” Resilient Wedge Gate Valve $____________ $_____________

2 each 12” Resilient Wedge Gate Valve $____________ $_____________

Tapping Sleeve (Stainless Steel)

1 each 8” x 4” $____________ $_____________

2 each 8” x 6” $____________ $_____________

2 each 8” x 8” $____________ $_____________

2 each 6” x 4” $____________ $_____________

2 each 6” x 6” $____________ $_____________

1 each 10” x 4” $____________ $_____________

4each 10” x 6” $____________ $_____________

1 each 10” x 8” $____________ $_____________

2 each 10” x 10” $____________ $_____________

1 each 12” x 4” $____________ $_____________

2 each 12” x 6” $____________ $_____________

1 each 12” x 8” $____________ $_____________

1 each 12” x 10” $____________ $_____________

1 each 12” x 12” $____________ $_____________

1 each 16” x 6” $____________ $_____________

1 each 16” x 8” $____________ $_____________

1 each 16” x 10” $____________ $_____________

1 each 16” x 12” $____________ $_____________

Retaining Glands

5 each 4” Mega-Lug Retaining Glands $____________ $_____________

15 each 6” Mega-Lug Retaining Glands $____________ $_____________

15 each 8” Mega-Lug Retaining Glands $____________ $_____________

5 each 10” Mega-Lug Retaining Glands $____________ $_____________

5 each 12” Mega-Lug Retaining Glands $____________ $_____________

5 each 16” Mega-Lug Retaining Glands $____________ $_____________

Accessories

12 each 2” Mechanical Joint Accessory kit $____________ $_____________

12 each 4” Mechanical Joint Accessory kit $____________ $_____________

24 each 6” Mechanical Joint Accessory kit $____________ $_____________

24 each 8” Mechanical Joint Accessory kit $____________ $_____________

12 each 10” Mechanical Joint Accessory kit $____________ $_____________

12 each 12” Mechanical Joint Accessory kit $____________ $_____________

12 each 16” Mechanical Joint Accessory kit $____________ $_____________

Gaskets

50 each 2” Mechanical Joint Gasket $____________ $_____________

50 each 4” Mechanical Joint Gasket $____________ $_____________

100 each 6” Mechanical Joint Gasket $____________ $_____________

100 each 8” Mechanical Joint Gasket $____________ $_____________

50 each 10” Mechanical Joint Gasket $____________ $_____________

20 each 12” Mechanical Joint Gasket $____________ $_____________

20 each 16” Mechanical Joint Gasket $____________ $_____________

Upon receipt of order, delivery will be made within __________ calendar days.

No contract shall be made with any person, firm or corporation in default of the city.

The City of reserves the right to award separate items.

All bids shall be firm for the period beginning July 1, 2026 and ending June 30, 2027.

The City of Adrian has a local preference policy.

The City of reserves the right to accept or reject any or all bids and to waive any irregularities.

All prices to be F.O.B. Adrian, Michigan.

All bids must contain information on the manufacturer of the products being bid.

Any questions may be directed to Mr. Steve Eberle at (517) 264-4859 or SEberle@adrianmi.gov .

All bids must be submitted in a sealed envelope clearly marked on the outside, “Sealed Bid – D.I. Pipe & Fittings.”

NAME OF COMPANY

ADDRESS

CITY STATE ZIP

BY TITLE

TELEPHONE FAX

DATE

EMAIL

CITY OF

Water Main Materials

Specifications

All bidders shall submit product specifications and manufacturers name and product code with bid. Also, delivery times shall be within 10 days from receipt of purchase order. All materials shall be manufactured and sold in . Other materials will not be accepted. All prices shall include shipping and handling charges.

Water Distribution Pipe

Thickness Class 52 Ductile Iron Pipe with thickness design requirements as specified by AWWA C150 and AWWA C151. The City requires all ductile iron pipe to meet the following minimum requirements: pipe shall meet the interior Cement Mortar Lining Requirements as specified by AWWA C104; pipe shall be tar coated on the exterior; have push on joints; include standard gaskets; arrive bundled and stacked in 18 foot minimum lengths; pipe shall be constructed with one end of bell shape and the other end plain; and lubricant shall be supplied as per manufacturer’s specifications.

Mechanical Joint Fittings, Bolts and Gaskets

Fittings shall be ductile iron in accordance with AWWA C110, AWWA C153, or AWWA C606, latest revisions. The exterior of ductile iron pipe, special, and fittings shall be coated with a 1-mil asphaltic coating in accordance with AWWA C151, Section 51-9. When specified, loose polyethylene encasement shall be supplied in accordance with AWWA C105. Mechanical joints shall conform to AWWA C111. Bolts shall be high-strength, low-alloy steel per AWWA C111. Unless otherwise specified, gasket material shall be standard styrene butadiene copolymer (SBR) per this standard.

Mechanical Joint & Tapping Gate Valves

Valves shall be Resilient Seated (Wedge) Gate Valves for Water Supply Service as specified by ANSI/AWWA C515. Valves shall meet or exceed the requirements of Underwriters Laboratories Standard UL262. The body, bonnet and seal plate shall be made of ductile iron in accordance with ASTM A536. The wedge shall be ductile iron in accordance with ASTM A536 and shall be totally encapsulated in rubber. No paint shall be allowed in wedge. This rubber coating shall be permanently bonded to the ductile iron wedge casting and shall meet ASTM D429 tests for rubber to metal bonding. All gaskets shall be O-ring seals. O-rings set in a cartridge shall not be allowed. All fasteners shall be stainless steel. The body, bonnet and seal plate shall be epoxy coated in accordance with ANSI/AWWA C550. The coating shall be on the interior and the exterior of the valve. The manufacturers name, valve size, year of manufacture, pressure rating (“250W”), C515 and “DI” shall be cast on the valve. Each valve shall be tested in accordance with ANSI/AWWA C515 and UL262. This shall include hydrostatic pressure testing at 500 psi. A certification of manufacture and testing shall be provided at the purchaser’s request. The City of recommends valves equivalent to or better than the construction of the ej “Flowmaster” Gate Valves. The City requires all gate valves to meet the following minimum requirements: mechanical joint; 2” square wrench operating nut and opens RIGHT (CLOCKWISE); non-rising stem.

Tapping Sleeves

Tapping sleeves shall be constructed out of 18-8 type 304 stainless steel including the flange to provide corrosion protection. Flange will conform to AWWA C207 Class D 150 lb. Outlet will be double welded, inside and out. Bolts and nuts will be 18-8 stainless steel and coated to resist galling. Bolts will be of the non-removable type. Tapping sleeves gaskets will be virgin SBR or Buna-N per ASTM 2000 and are to be a full gasket giving 360 degree pipe coverage. The City of Adrian recommends tapping sleeves equivalent to or better than the construction of the Ford “FAST” style tapping sleeve.