Site Visit - Awning and Installation

• Manufacture and install two (2) free-standing awnings with walls according to the specifications detailed below.


• Install each awning on existing concrete pads (one awning per pad) on the East-Northeast side of Building 59.


• Bury the awning legs 2 inches below the finished surface and secure them with concrete.


• Provide awning and wall installation instructions.

Specific Requirements:

• Two (2) custom free-standing awnings with 3 side walls


• Dimensions: 19’6” (length) x 5’ (width) x 8’ (height)


• 2/12 shed/monopitch roof, reverse slope with the highest point along the back wall.


• Gutters shall be manufactured and installed on all sides with down spouts located on the two front corners


• Material shall be weather resistant


• Structure shall have a high wind rating of Category “C” In accordance with (IAW) American Society of Civil Engineers (ASCE)/Structural Engineering Institute (SEI) ASCE/SEI 7, Chap 26.


• Paint Options: The primary color shall be ROBINS 22 or ROBINS 32 and any accent colors shall be ROBINS 48 or ROBINS 62.


• Installation: Awning #1 is to be installed on Pad #1, and Awning #2 on Pad #2.