Maintenance, Repair, and Preservation of Bangor Caisson 1 Prime

16 June 2025- The purpose of this amendment is to update the following: Attachment J-1 Statement of Work, Attachment J-2 Price Proposal Worksheet, Attachment J-6 Drawings and References, and Exhibit A CDRLs and DIDs as of 16 June 2025. Also, Attachment J-10 Declining Log has been removed.

5 June 2025- The purpose of amendment 0001 is to extend the RFC due date from 5 June 2025 at 12:00 PM PT to 12 June 2025 at 12:00 PM PT and the proposal due date from 13 June 2025 at 12:00 PM PT to 20 June 2025 at 12:00 PM PT. Also, the Attachment J-1 Statement of Work has been updated as of 5 June 2025.

________________________________________

The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair, and preservation of one (1) Bangor Caisson 1 Prime.

The Bangor Caisson 1 Prime characteristics are length: 108FT -7IN, width: 18 FT, height: 65 FT, full displacement: 1,363 L TONS, maximum draft: 35 FT, and hull material: steel.

The Contractors facility must possess the capability of one (1) Bangor Caisson 1 Prime with the dimensions as stated above. To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA.

Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officers Representative (COR) to pickup, transport (tow) and deliver the asset to and from the Contractors facility. Upon docking asset, wash, and clean asset. Contractor is responsible to for the interior and exterior coating renewal; replacement of non-skid; remove existing and install new PRC decking on the operations deck; removal, repair and reinstallation of dewatering pumps and motors; removal of existing and installation of new gate and check valves and associated valve actuators and reach rod assemblies; replacement of interior and exterior zincs; removal of existing and installing new port side rubber seal, opening, pumping, and cleaning tanks and voids; removal of existing light bulbs and installation of new LED bulbs; inspection of weather deck alarm lights and audible horn; replace damaged and missing weather deck safety light and foundation; ultrasonic testing of hull, weather deck, and tank steel; repair weather deck aprons; dock and undock Caisson; and perform dock and sea trials.

Desired Production Start Date: 12/16/2025.

Desired Caisson Delivery/Completion Date: On or before 6/17/2026.

Required Production Start Date: On or before 3/16/2026.

Required Caisson Delivery/Completion Date: No Later Than 9/17/2026.

Refer to clause 52.211-9 Desired and Required Time of Delivery regarding desired and required delivery information.

This is full and open competition. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov.