RESIDENTIAL OUTDOOR FURNITURE

-DuMor #502-32TX-BT Exterior Trash cans- OR APPROVED EQUAL- SPECIFICATIONS: -Trash cans should have a receptacle body and cover. -The liner should have at least a thirty-two (32)-gallon capacity. -Expansion anchors should be provided. -All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. -Materials that needs to be used for the outdoor furniture is as follows: wood-grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. -All finished powder-coated parts should comply with the following ASTM methods for coating and coating method: ASTM-D-523, ASTM-D-3363, ASTM-D-1737, ASTM-D-3359, ASTM-D-2794, ASTM-B-117, and ASSTM-D-3451. -Minimum twenty (20)-year limited warranty on structural failure of frame, a ten (10)-year limited warranty on structural failure of recycled plastic, a five (5) year limited warranty against finish failure on all powder-coated products, and a one (1)-year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.

-DuMor #505-60TX OUTDOOR BENCHES- OR APPROVED EQUAL- SPECIFICATIONS: -The seat height for outdoor benches should be approximately eighteen (18) inches. -Benches should be approximately seventy-five (75) inches wide, twenty-six (26) inches deep, and thirty-five (35) inches in height. -Benches should bear a weight capacity of seven hundred fifty (750) pounds. -All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. -Materials that needs to be used for the outdoor furniture is as follows: wood-grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. -All finished powder-coated parts should comply with the following ASTM methods for coating and coating method: ASTM-D-523, ASTM-D-3363, ASTM-D-1737, ASTM-D-3359, ASTM-D-2794, ASTM-B-117, and ASSTM-D-3451. -Minimum twenty (20)-year limited warranty on structural failure of frame, a ten (10)-year limited warranty on structural failure of recycled plastic, a five (5) year limited warranty against finish failure on all powder-coated products, and a one (1)-year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.

-DuMor #481-20TX OUTDOOR CHAIRS- OR APPROVED EQUAL- SPECIFICATIONS: -The seat height for outdoor chairs should be approximately seventeen (17) inches. -The chairs should be approximately twenty-seven (27) inches wide and twenty-five (25) inches deep. -Chairs should bear a weight capacity of three hundred fifty (350) pounds. -All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. -Materials that needs to be used for the outdoor furniture is as follows: wood-grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. -All finished powder-coated parts should comply with the following ASTM methods for coating and coating method: ASTM-D-523, ASTM-D-3363, ASTM-D-1737, ASTM-D-3359, ASTM-D-2794, ASTM-B-117, and ASSTM-D-3451. -Minimum twenty (20)-year limited warranty on structural failure of frame, a ten (10)-year limited warranty on structural failure of recycled plastic, a five (5) year limited warranty against finish failure on all powder-coated products, and a one (1)-year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.

-DuMor #6B-519TX-UMB OUTDOOR TABLES- OR APPROVED EQUAL- SPECIFICATIONS: -Outdoor tables should be approximately forty-eight (48) inches in diameter and thirty (30) inches in height. -Tables should have an umbrella hole in the center. -Expansion anchors should be provided. -All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. -Materials that needs to be used for the outdoor furniture is as follows: wood-grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. -All finished powder-coated parts should comply with the following ASTM methods for coating and coating method: ASTM-D-523, ASTM-D-3363, ASTM-D-1737, ASTM-D-3359, ASTM-D-2794, ASTM-B-117, and ASSTM-D-3451. -Minimum twenty (20)-year limited warranty on structural failure of frame, a ten (10)-year limited warranty on structural failure of recycled plastic, a five (5) year limited warranty against finish failure on all powder-coated products, and a one (1)-year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.

-DuMor #441-15X15S OUTDOOR PLANTERS- OR APPROVED EQUAL- SPECIFICATIONS: -Outdoor planters should be approximately twenty (20) to thirty (30) inches in height. -Expansion anchors should be provided. -All products must be 100% BLEACH cleanable to reduce the spread of infectious diseases. -Materials that needs to be used for the outdoor furniture is as follows: wood-grain recycled plastic slats, steel tubing, steel sheets, stainless steel, cast aluminum, steel plate, carbon steel flat bars, and steel expansion anchors. -All finished powder-coated parts should comply with the following ASTM methods for coating and coating method: ASTM-D-523, ASTM-D-3363, ASTM-D-1737, ASTM-D-3359, ASTM-D-2794, ASTM-B-117, and ASSTM-D-3451. -Minimum twenty (20)-year limited warranty on structural failure of frame, a ten (10)-year limited warranty on structural failure of recycled plastic, a five (5) year limited warranty against finish failure on all powder-coated products, and a one (1)-year limited warranty on all other items. SHIPPING IS TO BE INCLUDED IN BID OFFER. Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brand/specification stated in the solicitation.