Cabin Pressure Tester Set

This is a combined synopsis/solicitation for commercial items. This announcement constitutes the only solicitation; proposals/quotes are being requested and a written solicitation will not be issued.

This solicitation is issued as a Request for Quote (RFQ) under Full and Open Competition.

The Oklahoma Air National Guard intends to award a Firm-Fixed-Price (FFP) contract for the following items in accordance with the attached Specifications and Salient Characteristics:

• One (1) TRONAIR Cabin Pressure Test Set (Part Number: 15-7609-6000-FJ)


• One (1) Nano Water Separator Assembly (Part Number: GF0175WS) with Nano Filter (Part Number: GF0175M01)


• Shipping to TULSA, OK 74115

Submission Instructions:

Offerors are required to submit a signed copy of their quote conforming to the terms, conditions, and specifications herein. By signing and submitting the quote, the contractor agrees to deliver the products set forth in accordance with all specified terms. Quotes must be returned to the issuing office no later than the closing date specified in this posting via email to: 138.FW.MSC@us.af.mil

ITEM DESCRIPTION:

Tronair 15-7609-6000-FJ Cabin Pressure Test Set

Electrical/Power Requirements - The unit shall operate with an on-board battery and charger that uses line power of 120 to 240 VAC 50-60 HTZ to charge the battery with the supplied cord. Oil free air source is required, if not available then inline air filter with a Nano Purification part number GF0175M01 filter is required.

Product Requirements

Brand Name Characteristics:

Brand Name and model number as specified in the System Engineering MEMO dated 30 June 2025. The tester must meet all these salient characteristics. Written explanation of how it meets each salient characteristic must be included with quote.

Tronair 15-7609-6000FJ Cabin Pressure Test Set

1. Continuous duty air supply REQUIRED for operation of unit


2. 15-7609-6000-FJ-110 SCFM at 100 psi (6.9 bar) minimum (150 psi) max


3. 1 ½ in (4 cm) 20 ft. (6.1 m) detachable cabin supply hose with quick disconnect


4. 1 in (205 cm) ID minimum inlet hose required


5. Replaceable K-5844 air inlet filter element (40 Micron)


6. 30 ft (9.1 m) cabin sensor feedback hose


7. 30 ft (9.1 m) door seal supply hose


8. Pressure relief valve set at 13.25 to 13.75 psi (.91 to .95 bar)


9. Cabin pressure 0-to 15 psi (0- 0.97 bar) certified gauges


10. System pressure 0 to 30 psi (0 to 2.07 bar) certified gauges


11. Door seal pressure 0 to 60 psi (0 to 4 bar) certified gauges


12. Certified flow meter


13. 150 psi (10.3 bar) maximum shop air supply


14. 0 to 6,000 ft/minute (0 to 1829 m/minute) rate of climb indicator


15. ATA transport case with wheels and a retractable handle


16. CE marked


17. 15-7609-6000-FJ- Ambient temperature gauge 50 to 300 F (10 to 149 C)


18. 15-7609-6000-FJ- Incoming air pressure gauge 0 to 200 psi (0 to 13.8 bar)


19. 15-7609-6000-FJ- Incoming air shut off valve


20. F-16 specific sensing adapter hose K-4943


21. F-16 specific supply adapter hose K-4946


22. Inline air filter assy. with a NANO purification filter part # GF0175M01 filter

Product Requirements

Brand Name Characteristics:

Nano Water Separator Assy Part # GF0175WS/ with NANO filter part # GF0175M01 as specified in the System Engineering MEMO dated 30 June 2025. Written explanation of how it meets each salient characteristic must be included with quote.

Nano Water Separator Assy

1. Housing manufactured from die cast aluminum and polyester powder coated for optimum corrosion protection for the most demanding applications.


2. Manufactured in an ISO 9001 approved facility and tested in accordance with ISO 12500-4.


3. Applications include electronics, instrumentation, laboratories, automotive, robotics, oil and gas, paint applications and pneumatic conveying


4. Rated flow rate=175 SCFM