Mooring Buoys

Location: Hawaii
Posted: May 2, 2026
Due: May 8, 2026
Agency: State Government of Hawaii
Type of Government: State & Local
Category:
  • 20 - Ship and Marine Equipment
Solicitation No: Q26002504
Publication URL: To access bid details, please log in.

General Information

  • Line Items
  • Instructions
  • Q26002504 Mooring BuoysGeneral InformationSolicitation Number
    Q26002504Status
    ReleasedDepartmentLand & Natural ResourcesDivisionBoating and Ocean RecreationIslands (where the work/delivery is to be performed)
    StatewideCategoryGoodsRelease Date 04/24/2026Offer Due Date & Time05/08/2026 02:00 PMDescription-Jim Buoy #4403 or Walsh Marine #W2400MAW mooring buoy. Custom Bottom Swivel with No Top Eye, Through Rod, or Top Nut, All hardware must be, Completely foam-filled, with urethane foam that meets or exceeds United States Coast Guard requirements. These are special order buoys through Cal June Jim Buoy, Walsh Marine Products, or comparable. 24" Round Buoy with 5/8" Galvanized Swivel, 2 inch reflective prismatic blue band (or no band if this is an issue at supplier), No Top Eye, No Through Rod, No Top Nut, All hardware must be Stainless or Galvanized Steel, and completely foam-filled, with urethane foam that meets or exceeds United States Coast Guard requirements.

    Bid must be complete final price that will be charged, including all applicable taxes, delivery charges, and any other charges that may be incurred, for bid to be considered valid. Any mistake in quantity or price by vender will not be the responsibility of the buyer to purchase.

    Total price of previous contract; $12,060.00Contact PersonAlbright, RandallEmail randall.wb.albright@hawaii.gov Phone808-327-3691General Comments-Jim Buoy #4403 or Walsh Marine #W2400MAW mooring buoy. Custom Bottom Swivel with No Top Eye, Through Rod, or Top Nut, All hardware must be, Completely foam-filled, with urethane foam that meets or exceeds United States Coast Guard requirements. These are special order buoys through Cal June Jim Buoy, Walsh Marine Products, or comparable. 24" Round Buoy with 5/8" Galvanized Swivel, 2 inch reflective prismatic blue band (or no band if this is an issue at supplier), No Top Eye, No Through Rod, No Top Nut, All hardware must be Stainless or Galvanized Steel, and completely foam-filled, with urethane foam that meets or exceeds United States Coast Guard requirements.

    Bid must be complete final price that will be charged, including all applicable taxes, delivery charges, and any other charges that may be incurred, for bid to be considered valid. Any mistake in quantity or price by vender will not be the responsibility of the buyer to purchase.

    Total price of previous contract; $12,060.00Procurement OfficerDawn ChangAttachments Jim Buoy Mooring Ball with Prismatic Blue Band IMG 0989.jpg
    AG-008 103D General Conditions (1.10.23).pdf

    Download All


    Direct all questions regarding this Solicitation, and any questions or Issues relating to the accessibility
    of this Solicitation (Including the appendices and exhibits to this Document, and any other document related
    to this Solicitation), to: Albright, Randall.

    Q26002504 Mooring BuoysLine Items
    #
    Title
    Quantity
    Unit of Measure
    Commodity Code
    Code Table
    Commodity Code Description
    423910 Boat supplies, pleasure, merchant wholesalers
    423910 Boats, pleasure (e.g., canoes, motorboats, sailboats), merchant wholesalers
    423910 Marine supplies, pleasure, merchant wholesalers
    GeneralQuantity60Unit of MeasureEACHEstimated Price per Unit$130.00Estimated Total Price$7,800.00Title24" Custom Mooring BuoyDescription-Jim Buoy #4403 or Walsh Marine #W2400MAW mooring buoy. Custom Bottom Swivel with No Top Eye, Through Rod, or Top Nut, All hardware must be, Completely foam-filled, with urethane foam that meets or exceeds United States Coast Guard requirements. These are special order buoys through Cal June Jim Buoy, Walsh Marine Products, or comparable. 24" Round Buoy with 5/8" Galvanized Swivel, 2 inch reflective prismatic blue band (or no band if this is an issue at supplier), No Top Eye, No Through Rod, No Top Nut, All hardware must be Stainless or Galvanized Steel, and completely foam-filled, with urethane foam that meets or exceeds United States Coast Guard requirements.

    Bid must be complete final price that will be charged, including all applicable taxes, delivery charges, and any other charges that may be incurred, for bid to be considered valid. Any mistake in quantity or price by vender will not be the responsibility of the buyer to purchase.

    Total price of previous contract; $12,060.00Attachments Download All
    Print


    Direct all questions regarding this Solicitation, and any questions or Issues relating to the accessibility
    of this Solicitation (Including the appendices and exhibits to this Document, and any other document related
    to this Solicitation), to: Albright, Randall.

    Q26002504 Mooring BuoysInstructions
    • TRANSACTION FEES: The awarded vendor shall pay a transaction fee of 0.75% (.0075) of the award, not to exceed $5,000 for each award. This transaction fee shall be based on the original award amount and the awarded vendor shall be responsible for payment of the fee to Tyler Hawaii, the vendor administering the HIePRO. Payment must be made to Tyler Hawaii within thirty (30) days of receipt of invoice. The invoice is generated based on the date the award is posted.
    • QUESTIONS ABOUT THIS SOLICITATION: Unless otherwise indicated, questions regarding this solicitation must be directed to the Buyer listed.
    • RESPONSE TO THIS SOLICITATION: Only responses submitted through HIePRO shall be considered for award.
    • VENDOR COMPLIANCE – PAPER DOCUMENTS : Vendors not utilizing HCE shall provide paper certificates that must be valid at the time of award. All applications for applicable clearances are the responsibility of the vendor, who must be compliant pursuant to HRS§103D-310(c) with the chapters 1) Chapter 237, General Excise Tax Laws; 2) Chapter 382, Hawaii Employment Security Law; 3)Chapter 386, Worker’s Compensation Law; 4) Chapter 392, Temporary Disability Insurance; 5)Chapter 393, Prepaid Health Care Act; and 6) §103D-310(c), Certificate of Good Standing (COGS) for entities doing business in the State. Upon receipt of compliance paper documents (A-6, LIR#27, COGS), the purchasing agency reserves the right to verify their validity with the respective issuing agency.
    • VENDOR REGISTRATION IN HAWAII COMPLIANCE EXPRESS (HCE) : Vendors can register at https://vendors.ehawaii.gov/hce via an annual subscription fee and should subscribe prior to responding to a solicitation. For more information visit the HCE Section of the FAQs at http://spo.hawaii.gov/faqs/#tabs-4.
    • COMPLIANCE AND DOCUMENTATION: Vendors are required to be compliant with all appropriate state and federal statutes. Proof of compliance is required through HCE or via paper documentation.
    • OFFER DEEMED FIRM/AUTHORITY TO SUBMIT OFFER: Submission of an electronic response to the State of Hawaii constitutes and shall be deemed an offer to sell the specified goods and/or services to the State of Hawaii at the price shown in the response and under the State's Terms and Conditions.

      The electronic response submitter certifies that he/she is authorized to sign the response for the submitting vendor and that the response is made without connection with any person, firm, or corporation making a response for the same goods and/or services and is in all respects fair and without collusion or fraud.
    • ADDITIONAL FEES AND CHARGES: Vendors shall include all applicable fees, charges, surcharges, shipping/handling, delivery, or any other charges associated with this solicitation in the price submitted.
    • HAWAII GENERAL EXCISE TAX (GET): Unless otherwise stated in this solicitation, vendors shall include all applicable taxes in the price submitted. The Hawaii General Excise Tax (GET) shall not exceed 4.712% for the islands of Oahu, Kauai , Hawaii, and Maui.
    • VENDOR NON-COMPLIANCE : NON-COMPLIANCE may result in a vendor not receiving an award, delay of payment, or cancellation of award. If the vendor does not maintain timely compliance, which is the vendor’s responsibility, an offer otherwise deemed responsive and responsible may not be awarded. State agencies may check for compliance at any time.
    Daily notification on new contract opportunities

    With GovernmentContracts, you can:

    • Find more opportunities and win more business
    • Receive daily alerts for all new bid opportunities
    • Get contract opportunities matched to your business
    ONE WEEK FREE TRIAL

    See also

    ..., manufacturing 423430 Computer printers merchant wholesalers 323111 Digital printing (e.g., billboards..., merchant ...

    State Government of Hawaii

    Bid Due: 6/05/2026

    ...) merchant wholesalers GeneralQuantity1Unit of MeasureEACHTitleTapeChek 480/490 VHS Tape... Professional equipment and supplies ...

    State Government of Hawaii

    Bid Due: 6/05/2026

    ...Photographic equipment and supplies merchant wholesalers 333310 Digital cameras manufacturing 449210... Camera shops, ...

    State Government of Hawaii

    Bid Due: 6/05/2026

    ...423440 Shelving, commercial, merchant wholesalers 423830 Shelving, industrial, merchant wholesalers...

    State Government of Hawaii

    Bid Due: 6/05/2026

    * Disclaimer: Information regarding bids, requests for proposals (RFPs), or requests for qualifications (RFQs) is provided on this website only for convenience and does not constitute official public notice. Persons wishing to respond to or inquire about bids, RFPs, or RFQs should contact the appropriate government department.