| Location: | Utah |
|---|---|
| Posted: | Feb 17, 2026 |
| Due: | Mar 18, 2026 |
| Agency: | DEPT OF DEFENSE |
| Type of Government: | Federal |
| Category: |
|
| Solicitation No: | FA821726LINK22 |
| Publication URL: | To access bid details, please log in. |
This is a REQUEST FOR INFORMATION ONLY to obtain information for the LINK 22 radio, timing source, and transit case as described in the attachment. The scope is as follows:
Per the DoD Joint Tactical Data Link Migration Plan, the legacy Link-11 tactical data link is being sunset, creating critical capabilities gap for the CRC. The CRC relies heavily on Beyond-Line-of-Sight (BLOS) data exchange, and this project will integrate a new Link-22 capability to enhance operational effectiveness and support Joint All-Domain Command and Control (JADC2) objectives for both contingency and homeland defense missions.
To mitigate this gap, this project will integrate the Link-22 tactical data link into the CRC weapon system. The Government will furnish some core Link-22 components, including the System Network Controller (SNC), Signal Processing Controller (SPC), and COMSEC device in a separate transit case. This RFI is focused on gaining information for a needed solution of a Link-22 capable radio, ancillary equipment, timing source, and the design and fabrication of an adaptable transit case solution that houses the radio system and its supporting peripherals and interfaces with the core Link-22 case that contains the SNC, SPC, and COMSEC device.
Responses per direction in the RFI attachment. Due date is 18 Mar 2026 by 11 am MDT.
| Mar 12, 2026 | [Special Notice (Updated)] RFI for LINK 22 radios |

With GovernmentContracts, you can:
...fabrication activities in a professional and educational setting....
State Government of Utah
Bid Due: 7/28/2026
...demolition as required, fabrication and installation of stainless steel wall/bench/panel systems...
State Government of Utah
Bid Due: 7/28/2026
...fabrication, delivery, and installation and startup support as specified herein....
State Government of Utah
Bid Due: 8/05/2026
...for final design verification, shop drawing review, equipment fabrication, delivery, and installation and ...
State Government of Utah
Bid Due: 8/05/2026