Bow Valley Dump Station Flow Meter Installation

Location: Alberta
Posted: Oct 31, 2024
Due: Nov 14, 2024
Agency: Government of Alberta
Type of Government: State & Local
Category:
  • 66 - Instruments and Laboratory Equipment
Solicitation No: AB-2024-09224
Publication URL: To access bid details, please log in.
Open & competitive opportunity
Open
Forestry and Parks
Request for Quotes
Bow Valley Dump Station Flow Meter Installation
SCOPE OF WORK:
Provide labour, supplies, materials, and equipment for installation of a new flow meter. This may include, but is not limited to the following tasks:

.1 Mobilization and demobilization.
.2 Supply and install temporary fencing, signage, and barricades as per the Contractor’s Health and Safety Plan, to be approved by Alberta Parks.
.3 Perform locates and hydrovac, as necessary to identify existing buried utilities.
.4 Tree removal, clearing, and grubbing as required to facilitate access to the work area.
.5 Excavate and expose existing force main from the dump station septic tank. The force main
is deep buried, approximately 3.5 m below ground. The tie-in location to the force main is shallow buried, approximately 2.0 m below ground.
.6 Remove and dispose a section of force main to accommodate access for new piping, flow
meter, and buried concrete vault.
.7 Snow removal.
.8 Cold weather earthwork - See Section 31 23 17 Cold Weather Earthworks - 3.3 Placement
and Compaction of Fill materials – Cold Weather
.9 Prepare and compact the subgrade.
.10 Supply, deliver, install and compact bedding gravel.
.11 Supply and install new piping (50 mm HDPE outside vault or Schedule 80 PVC inside vault),
precast concrete flow meter vault, and flow meter, including bypass piping.
.12 Connect electrical power to the new flow meter, to be supplied from an existing control
panel at the dump station.
.13 Supply, deliver, install, and compact backfill material.
.14 Perform flow testing and commissioning, including supplying hauled water to fill the septic
tanks, pressure testing the HDPE pipe, draining the system and blow down. Contractor to
prepare a Commissioning Plan, to be approved by Alberta Parks. Kananaskis Region
Operations will confirm operation of the flow meter during commissioning in May 2025 and
any outstanding issues will be resolved by the Contractor as part of the warranty period.
.15 Complete surface restoration to the existing naturalized area including topsoil and seed.
.16 Clean up work area.
APC Reference # AB-2024-09224
Category Construction
Posting Date • Time Oct 31, 2024 • 10:23 am (MT)
Closing Date • Time Nov 14, 2024 • 2:00:59 pm (MT)
Region(s) of Delivery Alberta
Daily notification on new contract opportunities

With GovernmentContracts, you can:

  • Find more opportunities and win more business
  • Receive daily alerts for all new bid opportunities
  • Get contract opportunities matched to your business
ONE WEEK FREE TRIAL
* Disclaimer: Information regarding bids, requests for proposals (RFPs), or requests for qualifications (RFQs) is provided on this website only for convenience and does not constitute official public notice. Persons wishing to respond to or inquire about bids, RFPs, or RFQs should contact the appropriate government department.